• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.89-116
• /
• 2008

RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.11a
• /
• pp.257-282
• /
• 2008

RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers. Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.143-161
• /
• 2016

This study was conducted focusing on the role of auteurism animation. The purpose of auteurism animation is to criticize irregularities of a society in witty and fierce way through satires from the sharp perspectives of a animator that is not bound by tastes of people or the interests or standpoints of specific groups, and thus to induce positive changes in a society as a purifier. In the context, this study investigated satires shown in by Jan Svankmajer and by Norman Mclaren among the animators who utilize animation as a tool to produce social meaning. As a result, the following characteristics and meanings were found. First, Dimensions of Dialogue is an animation that satires absurdity and irregularities of a human society in symbolic and exceptional way through directing by segmentations of images and omnibus structures. The satire carries the lesson of improvement in the hidden part of cynical attack to history, society, and human beings. It also maximizes absolute reality and engagement of images of Jan Svankmajer through unique and grotesque images of the animator such as alienated world, confusing shapes, and amusement of irregularities. Second, the movie, is an exemplary animation that applied core concept of animation through pixilation techniques based on an event story structure by causal relationship. It satires the changing process of a good man to violent madness through confrontation and conflicts for material desires, with exaggerated slipstick movements and humors as a black comedy. The satire methods of both animation works are delivered through unique image styles and symbolic wordage of the animators who triggered ironical laughter in attacking humanism and moral insensitivity that might be felt seriously otherwise. That is, the animators try to show the positive will for changing the society to a sound one through the form of negativity in terms of moral perspective in animation rather than destruction against the target. As such, the satires in both works worked as an auteurism allegory that maximizes social functions and artistic influence of animation.

• Journal of Korean Academy of Nursing
• /
• v.30 no.1
• /
• pp.122-136
• /
• 2000

Chronic illness requiring attention and management during a long period of time puts great burden onto patients, their family and society. For patients with chronic illnesses, providing social support is the most important, and the fundamental support comes from their spouses. Amount and quality of support from spouses seems to differentiated according to the sex of patients. Female patients tend to believe that their spouses are not very supportive. Therefore, the researchers assessed the burden of husbands of female arthritis patients to discover the factors that result in greater burden. Also, they developed a theoretical model of husbands′ care for their wives through a qualitative research into husbands′ experience. Method 1: The study material was 650 female arthritis patients registered in an arthritis clinic. The questionnaire about the disease experience of female arthritis patients and the burden of husbands were sent. Returned questionnaires numbered 210(32.3%) and 27 were excluded because of inadequate answers. The remaining 183 questionnaires were analyzed. The mean age of the patients was 51 years and the mean age of spouses was 55 years. The mean marital period was 28 years. The average duration since diagnosis was 9.1 years. Education level was varied from primary school to graduate school, and average income/month was 1,517,300 won. Method 2: Initial questionnaire studies on the burden of husbands were performed. Among 183 responding husbands, 23 consented to participate for a qualitative research. Data was obtained by direct and telephone interviews. The mean age of participants was 58 years, and the educational level and socioeconomic status also varied. Result: 1. Husbands′ burden: The average burden was 57.68 with a range of 6-96. 2. Burden and general characteristics: The husband′s burden correlated with the age of the patients, numbers in the family, therapy methods, patient′s level of discomfort, patient′s disease severity, patient′s level of dependence and the husband′s understanding of the level of severity. 3. Linear correlation analysis on burden: The husbands′ burden is explained in 22.5% by husband′s recognition of level of severity and husbands′ age. 4. There were four patterns of the burden on husbands: both objectve burden and subjective burden were high(pattern I), both of objectve burden and subjective burden were low(pattern II), objective burden was high but subjective burden was low(pattern III), objective burden was low but subjective burden was high(pattern IV). The pattern was correlated with the family income, educational level of the patients and their husbands, therapy methods, patient′s level of discomfort, patient′s disease severity, patient′s level of dependence and husband′s understanding of level of severity. 5. The core category of the caring experience of the husbands with arthritis patients was "companionship". The causal factor was the patients′ experience due to symptoms : physical disfigurement, pain, immobility, limitation of house chores, and limitation of social activities. Contextural factors are husbands′ identification of housework and husbands′ concern about the disease. The mediating factors are economic problems, fear of aging, feeling of limitation and family support. The strategy for interaction is mind control and how to solve emotional stress. The "companionship" resulted from caring activities, participation of household activities, helping patients′ to coping with emotional experience. 6. Companionship is established through the process of entering intervention, and caring state of mind. Entering intervention is the phase of participation of therapy and involvement of houseworks. The caring phase consists of decision on therapy, providing therapy, providing direct care, and taking over the household role of wife. Through caring phase, the changing phase set a stage in which husbands consolidate the relationship with their wives, and are reminded of the meaning of marriage. As a result, in changing phase, husbands′ companionship is enhanced. In conclusion, nursing care of chronic illnesses should include a family member especially the spouse. All information on disease shoud be provided to patients and whole family member. Strong support should also be provided to overcome difficulties in taking over role of other sex. Then the quality of life of patients and families will be much improved.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.215-225
• /
• 1999

To study the vertical variations of major elements, trace elements and rare earth elements(REEs) contents in deep-sea sediments, six cores from Korea Deep-sea Environmental Study area(KODES) were analyzed. Topmost sediment layers of KODES area are divided into two Units; brown-colored and peneliquid Unit I and pale brown-colored and relatively solidified Unit II. Contents of major elements, REEs, Cu, Sr and Rb in each Unit are almost same, while contents of Mn, Ni and Co in Unit I are two or three times higher than those in Unit II. R-mode factor analysis represents that surface sediments are composed of alumino-silicate phase (AI-Ti-K-Mg-Fe-Rb-Ce), apatite phase (Ca-P-Cu-Sr-Trivalent Rare Earth Elements) and Mn-oxide phase(Mn-Ni-Co). Factor scores in silicate and apatite phases in each Unit are nearly same, whereas those in Mn-oxide phase in Unit I is higher than those in Unit II. While NilCu ratio in Unit I is two times higher than that in Unit II. We interprete the geochemical fractionation of Ni and Cu as a result that Ni can be remobilized in oxygen-depleted micro-environment in Units I and II and then easily reprecipitated in Unit I, while most of Cu supplied together with organic material is decomposed mostly in Unit I and sorbed into apatite.

• Journal of Chest Surgery
• /
• v.39 no.7 s.264
• /
• pp.505-510
• /
• 2006

Background: Small animal cardiopulmonary bypass (CPB) model would be a valuable tool for investigating path-ophysiological and therapeutic strategies on bypass. The main advantages of a small animal model include the reduced cost and time, and the fact that it does not require a full scale operating environment. However the rat CPB models have a number of technical limitations. Effective maintenance and control of core temperature by a heat exchanger is among them. The purpose of this study is to confirm the effect of rectal temperature maintenance using a heat exchanger of cardioplegia system in cardiopulmonary bypass model for rats. Material and Method: The miniature circuit consisted of a reservoir, heat exchanger, membrane oxygenator, roller pump, and static priming volume was 40 cc, Ten male Sprague-Dawley rats (mean weight 530 gram) were divided into two groups, and heat exchanger (HE) group was subjected to CPB with HE from a cardioplegia system, and control group was subjected to CPB with warm water circulating around the reservoir. Partial CPB was conducted at a flow rate of 40 mg/kg/min for 20 min after venous cannulation (via the internal juglar vein) and arterial cannulation (via the femoral artery). Rectal temperature were measured after anesthetic induction, a ter cannulation, 5, 10, 15, 20 min after CPB. Arterial blood gas with hematocrit was also analysed, 5 and 15 min after CPB. Result: Rectal temperature change differed between the two groups (p<0.01). The temperatures of HE group were well maintained during CPB, whereas control group was under progressive hypothermia, Rectal temperature 20 min after CPB was $36.16{\pm}0.32^{\circ}C$ in the HE group and $34.22{\pm}0.36^{\circ}C$ in the control group. Conclusion: We confirmed the effect of rectal temperature maintenance using a heat exchanger of cardioplegia system in cardiopulmonary bypass model for rats. This model would be a valuable tool for further use in hypothermic CPB experiment in rats.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.151-157
• /
• 2010

Purpose: The purposes of this study was to evaluates shear bond strength between zirconia core and veneer-ceramic in order to examine the clinical practice of colored zirconia block fabricated by infiltration method into the metal chloride solution. Material and methods: CNU block and $Everest{(R)}$ ZS blank were used. VITA In-$Ceram{(R)}$2000 YZ Coloring liquid (LL1) and 3 aqueous metal chloride solutions containing chromium and molybdenum ingredients were used. 40 zirconia specimens were prepared into cuboid shape ($5{\times}5{\times}10 mm$). All specimens were divided into 5 groups by infiltrating into the coloring liquids. After that, porcelain was build up into the shape of $5{\times}5{\times}4mm^3$, followed by sintering. The maximum loading and shear bond strength was measured. Failure patterns and failure sites were examined. Results: 1. There were no statistical differences in shear bond strength between zirconia blocks (P > .05). 2. There were no statistically significant differences in shear bond strength between non-colored and colored zirconia blocks, while shear bond strength of non-colored zirconia blocks is higher than that of colored specimen (P > .05). 3. In the comparison with shear bond strength among colored zirconia blocks, there were no statistical differences according to kinds of coloring liquid (P > .05). 4. Mixed failure patterns were mainly observed in the failure between zirconia and veneering ceramic. The veneering ceramic failure of all specimens was observed in either interface of zirconia or veneering ceramic. Conclusion: Shear bond strength between colored zirconia and veneering ceramic shows lower tendency than non-colored zirconia, but there was clinically allowable value.

• Journal of Chest Surgery
• /
• v.40 no.3 s.272
• /
• pp.159-167
• /
• 2007

Background: Vocabularies originating from Chinese characters constitute an important common factor in the medical terminologies used 3 eastern Asian countries; Korea, China and Japan. This study was performed to comparatively analyze the medical terminologies of these 3 countries in the field of cardiopulmonary bypass (CPB) and; thereby, facilitate further understanding among the 3 medical societies. Material and Method: A total of 129 English terms (core 85 and related 44) in the field of CPB were selected and translated into each country's official terminology, with help from Seoul National University Hospital (Korea), Tokyo Michi Memorial Hospital(Japan), and Yanbian Welfare Hospital and Harbin Children Hospital (China). Dictionaries and CPB textbooks were also cited. In addition to the official terminology used in each country, the frequency of use of English terms in a clinical setting was also analyzed. Result and Conclusion: Among the 129 terms, 28 (21.7%) were identical between the 3 countries, as based on the Chinese characters. 86 terms were identical between only two countries, mostly between Korea and Japan. As a result, the identity rate in CPB terminology between Korea and Japan was 86.8%; whereas, between Korea and China and between Japan and China the rates were both 24.8%. The frequency of use of English terms in clinical practices was much higher in Korea and Japan than in China. Despite some inherent limitations involved in the analysis, this study can be a meaningful foundation in facilitating mutual understanding between the medical societies of these 3 eastern Asian countries.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.32-32
• /
• 2014

Meju is a brick of dried fermented soybeans and is the core material for Jang such as Doenjang and Ganjang. Jang is produced by addition of salty water to Meju and is considered the essential sauces of authentic Korean cuisine. Meju is fermented by diverse microorganisms such as bacteria, fungi and yeasts. It is known that fungi play an important role in the Meju fermentation and they degrade macromolecules of the soybeans into small nutrient molecules. In previous study, 26 genera and 0 species were reported as Meju fungi. However, it is not comprehensively examined where the fungi present on the Meju are originated. In order to elucidate the origin of the fungi present on the Meju, the mycobiota of 500 samples soybean kernels, 296 rice straw pieces and air samples of Jang factories was determined in 0, 2 and 7 Jang factories respectively. Forty-one genera covering 86 species were isolated from the soybeans and 33 species were identical with the species from Meju. From sodium hypochlorite untreated soybeans, Eurotium herbariorum, Eurotium repens, Cladosporium tenuissimum, Fusarium fujikuroi, Aspergillus oryzae/flavus and Penicillium steckii were the predominant species. In case of sodium hypochlorite-treated soybeans, Eurotium herbariorum, E. repens and Cladosporium tenuissimum were the predominant species. Of the 4 genera and 86 species isolated from soybeans, 3 genera and 33 species were also found in Meju. Thirty-nine genera and 92 species were isolated from the rice straws and 40 species were identical with the species from Meju. Fusarium asiaticum, Cladosporium cladosporioides, Aspergillus tubingensis, A. oryzae, E. repens and Eurotium chevalieri were frequently isolated from the rice straw obtained from many factories. Twelve genera and 40 species of fungi that were isolated in the rice straw in this study, were also isolated from Meju. Especially, A. oryzae, C. cladosporioides, E. chevalieri, E. repens, F. asiaticum and Penicillium polonicum that are abundant species in Meju, were also isolated frequently from rice straw. C. cladosporioides, F. asiaticum and P. polonicum that are abundant in low temperature fermentation process of Meju fermentation, were frequently isolated from rice straw incubated at $5^{\circ}C$ and $25^{\circ}C$, while A. oryzae, E. repens and E. chevalieri that are abundant in high temperature fermentation process of Meju fermentation, were frequently isolated from rice straw incubated at $25^{\circ}C$ and $35^{\circ}C$. This suggests that the mycobiota of rice straw have a large influence in mycobiota of Meju. Thirty-nine genera and 92 species were isolated from the air of Jang factories and 34 species were identical with the species from Meju. In outside air of the fermentation room, Cladosporium sp. and Cladosporium cladosporioides were the dominant species, followed by Cladosporium tenuissimum, Eurotium sp., Phoma sp. Sistotrema brinkmannii, Alternaria sp., Aspergillus fumigatus, Schizophyllum commune, and Penicillium glabrum. In inside air of the fermentation room, Cladosporium sp., Aspergillus oryzae, Penicillium chrysogenum, A. nidulans, Aspergillus sp., C. cladosporioides, Eurotium sp., Penicillium sp., C. tenuissimum, A. niger, E. herbariorum, A. sydowii, and E. repens were collected with high frequency. The concentrations of the genus Aspergillus, Eurotium and Penicillium were significantly higher in inside air than outside air. From this results, the origin of fungi present on Meju was inferred. Of the dominant fungal species present on Meju, Lichtheimia ramosa, Mucor circinelloides, Mucor racemosus, and Scopulariopsis brevicaulis are thought to be originated from outside air, because these species are not or are rarely isolated from rice straw and soybean; however, they were detected outside air of fermentation room and are species commonly found in indoor environments. However, A. oryzae, P. polonicum, E. repens, P. solitum, and E. chevalieri, which are frequently found on Meju, are common in rice straw and could be transferred from rice straw to Meju. The fungi grow and produce abundant spores during Meju fermentation, and after the spores accumulate in the air of fermentation room, they could influence mycobiota of Meju fermentation in the following year. This could explain why concentrations of the genus Aspergillus, Eurotium, and Penicillium are much higher inside than outside of the fermentation rooms.