• 전기학회논문지
• /
• 제61권9호
• /
• pp.1269-1274
• /
• 2012

In this paper, the iron loss was calculated using estimated iron loss coefficient at 650W Interior Permanent Magnet Synchronous Motor(IPMSM) and 250W IPMSM. The iron loss coefficients was estimated different according to electrical steel material used to stator and rotor core in motor. Aspect of The rotating flux field and alternating flux field was confirmed by magnetic field behavior and harmonic analysis in stator core, the iron loss was calculated using flux density by Finite Element Method(FEM) and estimated coefficients by iron loss coefficient estimation proposed in this paper. The iron loss experiment was performed for verified to iron loss calculation, and the iron loss coefficients were verified by comparison of iron loss calculation value and experimental value.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.221-224
• /
• 2008

We made densified wood pellet by hemp woody core as replacing wood resource. Hemp was separated into the bast fiber and the woody core by hot steaming treatment. The hemp woody core had a similar lignin content and carbohydrate composition with hardwood. Also, the hemp had a low ash content, which resulted in a low ash formation in pellet burning. Heating value of the hemp pellet had a very similar to the pellet made by hardwoods. The hemp woody core can replace hardwood for densified wood pelletmaking.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.467-472
• /
• 1996

This study discusses special aspects of severe accident related recriticality modeling and analysis in the Advanced Neutron Source (ANS) reactor.$^{1, 2)}$ The analytical comparison of three elements core to former two elements case is conducted including evaluation of suitable nuclear cross-section sets to account for the effects of system configulation, fuel and moderator mixture temperature, material dispersion and the other thermal-hydraulics. Three elements core ANS reactor is the alternative core design which was proposed as a modified core design, with three fuel elements instead of two, that would allow operation with only 50% enriched uranium (former uranium fuel is the baseline design value of 93%) A comprehensive test matrix of calculations to evaluate the threat of a criticality event in the ANS is described. Strong dependencies still on geometry, material constituents, and thermal-hydraulic conditions are verified. Therefore, the concepts of mitigative design features are qualified.d.

• 한국컴퓨터정보학회논문지
• /
• 제20권9호
• /
• pp.1-10
• /
• 2015

In this paper, we propose a new variable latency L1 data cache architecture for multi-core processors. Our proposed architecture extends the traditional variable latency cache to be geared toward the multi-core processors. We added a specialized data structure for recording the latency of the L1 data cache. Depending on the added latency to the L1 data cache, the value stored to the data structure is determined. It also tracks the remaining cycles of the L1 data cache which notifies data arrival to the reservation station in the core. As in the variable latency cache of the single-core architecture, our proposed architecture flexibly extends the cache access cycles considering process variation. The proposed cache architecture can reduce yield losses incurred by L1 cache access time failures to nearly 0%. Moreover, we quantitatively evaluate performance, power, energy consumption, power-delay product, and energy-delay product when increasing the number of cache access cycles.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.8-13
• /
• 2018

The light weight composite materials have been replacing in high performance structures. The object of this study is to examine the effects of the initial crack location about a delamination in a PVC foam cored sandwich composite that is used for the strength improvement of structures. The initial crack location and fiber laminates thickness were changed with several types. The MMB specimen was used for evaluating the fracture toughness and crack behaviors. The material used in the experiment is a commercial twill carbon prepreg in CFRP material and Airex in PVC foam core. Sandwich laminate composites are composed by PVC foam core layer between CFRP face sheets. The face sheets were fabricated as 2 types of 5 and 8 plies. The initial cracks were located in a PVC form core and the interface of upper CFRP sheet. From the results, the crack initiation was affected with the location of the initial crack inserted in the PVC foam core. Among them, the initial crack at 1/3 of the upper part of the PVC foam core was the most rapid progression. And the critical energy release rate was $0.40kJ/m^2$, which is the lowest value when the initial crack was inserted into the interface between a PVC foam core and CFRP laminated with 5 plies. Meanwhile, the highest value of $1.27kJ/m^2$ was obtained when the initial crack was located at the center line in case of the 8 plies.

• 융합보안논문지
• /
• 제7권2호
• /
• pp.27-37
• /
• 2007

기업 경영환경의 급격한 변화로 과거 공급자 중심의 경영패러다임은 고객 및 프로세스 중심의 경영패러다임으로 변화하고 있으며 이러한 변화에 민첩하고 유연하게 대응하며 지속적으로 변화하는 기업만이 시장에서 생존할 수 있는 시대가 되었다. 기업은 통합 생산성을 고려하여 프로세스를 재설계하고 내부업무를 통합하는 등 비즈니스 프로세스를 통합하여 경영의 효율성을 극대화하기 위해 많은 투자를 한다. 이러한 노력은 기업운영차원에서 반드시 필요하지만 오늘날 빠르게 변화하는 시장과 고객의 요구에 대처하면서 기업의 전략과 연계하여 운영차원으로 적용하지는 못하고 있다. 효율적인 경영을 통해 얻을 수 있는 이점에는 한계가 있으며 기업내부경영의 효율화가 극대화되어도 치열한 경영환경 하에서 경쟁우위를 차지할 수 있는 요소가 되지는 못한다. 따라서 기업은 시장에서 살아남고 경쟁우위를 유지하기 위해 새로운 가치를 창출할 수 있는 전략을 도출하여 빠르게 프로세스에 적용하고 지속적으로 관리해야 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1073-1077
• /
• 1996

This paper presents a recoil and counter recoil(R&CR) motion measurement method using linear variable differential transformers(LVDT). The output of a LVDT is obtained from the differential voltage of the 2nd transformers. As a sensor core is attached at the motion body, the output is directly proportional to the core motion. Displacement, velocity and acceleration are measure from the core length. With a comparison between the measurement result and the known value which is obtained by the precision steel tape, the accuracy and the usefulness of the proposed scheme is validated.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3585-3593
• /
• 1974

This thesis a result of theoretical and experimental studies on the shape of seepage line and seepage quantities in various inclined core walls. The value of this determination was examined and compared with the values of calculation acquaired to be based on Fukutas, Jin's and author's approximate equation of the theory. Thus the writer of this paper confirms that the seepage quantity can be decreased by changing the types of the inclined core wall and it's change of the slope.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.406-408
• /
• 2002

In order to know the characteristics of circadian rhythms in core temperature in tropical inhabitants, we measured rectal temperatures every 10 min for 24 hrs in 6 Vietnamese, 20 - 22 yrs (5 males and I females) under natural conditions. Average light intensity was 16000 lx. Ambient temperatures ranged from 33 to 36 oC. These data obtained were compared with those in Japanese setters and the Polish inhabitants. The participants were sitting mostly during wakefulness and lying in bed during sleep. The results obtained are summarized as follows: I) The average maximum value was 37.7 oC, which was significantly higher than in the Japanese and Polish as well. 2) The average minimum value was 36.4 oC, which was also lower. 3) A range of oscillation was 1.3 oC, which was clearly greater than in the people living in the temperate areas. The higher maximum value of core temperature, which was actively regulated under warm temperature, seemed of adaptive significance in order to reduce water consumption. A greater rage of oscillation in tropical Vietnamese people might have ecological significance for efficient acclimatization in the environment with strong light intensity and high ambient temperature, suggesting that the setpoint of core temperature could show a greater range of oscillation.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.15-24
• /
• 2019

Fair Allocation of profits or costs arising from joint participation by multiple individuals or entities with different purposes is essential for their continuing involvement and for their dissatisfaction reduction. In this research, fair allocation of the profits of forming a grand coalition in Three-Echelon Supply Chain (TESC) game that is composed of manufacturer, distributor and retailer, is studied. In particular, the solutions of the proportional method of profit, the proportional method of marginal profit, and Shapley value based on cooperative game theory are proved to be in the desirable characteristics of the core. The proportional method of profit and the proportional method of marginal profit are often used because of their ease of application. These methods distribute total profit in proportion to profits or marginal profits of each game participant. In addition, Shapley value can be defined as the average marginal profit when one game player is added at a time. Even though the calculation of the average of all possible marginal profits is not simple, Shapley value are often used as a useful method. Experiments have shown that the solution of the incremental method, which calculates the marginal cost of adding game players in the order of manufacturers, distributors and retailers, does not exist in the core.