• 전기의세계
• /
• v.23 no.1
• /
• pp.73-78
• /
• 1974

Digital simulation algorithms and program for multimachine dynamic stability have been developed which represent the effects of machines much more complety than have been available previously. Emphasis is given to the savings of the memory spaces required, thus making it possible to use a small computer with limited capacity of core storage (without auxiliary storage). Both d- and q- aris quantities are fully represented, and the speed-governing and voltage-regulating system available are ertensive, thus allowing a very close approximation to any physical system. Facilities for dynamic and nonlinear loads are also included. The computational algorithms and program developed have been shown to be extensive and complete, and are very desirable features minimizing memory spaces for stability calculations. The capabilities have been demonstrated by several case studies for an actual power system of 44 generators, 22 loads and 33 buses. About 13-K words of memory spaces have been required for the case studies on the basis of two words per real variable and a word per integer variable.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1622-1627
• /
• 2008

A suspension is a core part, determining running stability and riding quality of vehicles and its stiffness is essential parameters in the process of vehicle designing. Suspension stiffness shall be adjusted to meet requirements of running stability and curve running performance, as adding stiffness to primary suspension for running stability in high-speed running results running performance degradation in curved track. The purpose of the report lies in utilization of usable data for optimization of suspension via analyzing running performance through changing stiffness of railway vehicle suspension.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.3
• /
• pp.29-37
• /
• 1992

This research was carried out to investigate the effects of cyclic humidification on the dimensional stability of particleboard manufactured according the three specific gravity levels and com-ply fabricated with a core of particleboard and veneer or plywood as the face and back materials. Both the particleboard and com-ply were subjected to four cycles of 50-90-50% relative humidity. The results are summarized as follows: Particleboard and com-ply followed a clear pattern of increasing dimensions and weight on the adsorption cycle and decreasing dimensions and weight on the humidification cycle. After the fourth cycle, the dimensions and weight of both particleboard and com-ply were greater than those originally measured. The greater part of increase in occurred during the first humidification cycle. The specific gravity of particleboard has a significant effect thickness and volume change. The dimensional stability of com-ply was better than that of particleboard. In addition, the dimensional stability of com-ply bonded with plywood was better than that of com-ply bonded with veneer.

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.30-34
• /
• 2015

Thermo-mechanical treatment process of a compressed open-cell rigid polyurethane foam (OC-RPUF), which was fabricated for the vacuum insulation panel (VIP), was studied to obtain an optimum condition for the dimensional stability by the relaxation of compressive stress. Thermo-mechanical deformation of the sample OC-RPUF was shown to occur from about $120^{\circ}C$. Yield stress of 0.36 MPa was shown at about 10% yield strain. And, densification of the foam started to occur from 75% compressive strain and could be continued up to max. 90%. Compression set of the sample restored after initial compression to 90% at room temperature was ca. 82%. Though the expansion occurred to about twice of the originally compressed thickness in case of temperature rise to $130^{\circ}C$, it could be overcome and the dimensional stability could be maintained if the constant load of 0.3 MPa was applied. As the result, a thermo-mechanical treatment process, i.e, annealing process at temperature of $130{\sim}140^{\circ}C$ for about 20 min as is the maximum compressed state at room temperature, should be required for dimensional stability as an optimum condition for the use of VIP core material.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.627-636
• /
• 2007

The present work is aimed at further discussing the effectiveness of dimensionless parameters recently proposed for the analysis of flow stability in heated channels with supercritical fluids. In this purpose, after presenting the main motivations for the introduction of these parameters in place of previously proposed ones, additional information on the theoretical bases and on the consequences of this development is provided. Stability maps, generated by an in-house program adapted from a previous application to boiling channels, are also shown for different combinations of the operating parameters. The maps are obtained as contour plots of an amplification parameter obtained from numerical discretization and subsequent linearization of governing equations; as such, they provide a quantitatively clear perspective of the effect of different boundary conditions on the stability of heated channels with supercritical fluids. In order to assess the validity of the assumptions at the basis of the in-house model, supporting calculations have been performed making use of the RELAP5/MOD3.3 computer code, detecting the values of the dimensionless parameters at the threshold for the occurrence of instability for a heated channel representative of SCWR proposed core configurations. The obtained results show reasonable agreement with the maps, supporting the applicability of the proposed scaling parameters for describing the dynamic behaviour of heated channels with supercritical fluids.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.646-654
• /
• 2010

This paper describes an integrated chassis control for a maneuverability, a lateral stability and a rollover prevention of a vehicle by the using of the ESC and AFS. The integrated chassis control system consists of a supervisor, control algorithms and a coordinator. From the measured and estimation signals, the supervisor determines the vehicle driving situation about the lateral stability and rollover prevention. The control algorithms determine a desired yaw moment for lateral stability and a desired longitudinal force for the rollover prevention. In order to apply the control inputs, the coordinator determines a brake and active front steering inputs optimally based on the current status of the subject vehicle. To improve the reliability and to reduce the operating load of the proposed control algorithms, a multi-core ECU platform is used in this system. For the evaluation of this system, a closed loop simulations with driver-vehicle-controller system were conducted to investigate the performance of the proposed control strategy.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2007

A simple and reliable cryo technique using desiccation and slow freezing of winter dormant buds was employed for 238 core collection of mulberry germplasm collected from diverse geographical regions and maintained under tropical conditions in the ex situ field gene bank to develop long-term biodiversity conservation for ensuring sustainable utilization of these valuable resources. Desiccation and freezing tolerance of bud grafts and excised shoot apices in the axillary buds of different Morus species under in vivo and in vitro condition indicated species-specific variation and most of the wild Morus species were found sensitive. In vitro regeneration and cryopreservation($-196^{\circ}C$) protocols using differentiated bud meristem like axillary winter dormant buds were worked out for a wide range of Morus species, land races, wild and cultivated varieties. Successful cryopreservation of mulberry winter dormant buds of different accessions belonging to M. indica, M. alba, M. latifolia, M. cathayana, M. laevigata, M. nigra, M. australis, M. bombycis, M. sinensis, M multicaulis and M. rotundiloba was achieved. Among wild species Morus tiliaefolia, and M. serrata showed moderate recovery after cryopreservation. Survival rates did not alter after three years of cryopreservation of different Morus species. ISSR markers were used to ascertain the genetic stability of cryopreserved mulberry, which showed no difference detected among the plantlets regenerated from frozen apices in comparison to the non-frozen material.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.817-824
• /
• 2017

This paper presents the characteristics of wing-tail interference for a tail-controlled missile. The magnitude of wing-tail interference was calculated with wind tunnel test results and its effects on aerodynamic coefficients were investigated. The downwash angle of tail wing was calculated with experimental data and the effect of wing-tail interference was expressed as a ratio of angle of attack. Numerical simulations were made to examine flow characteristics of wing-tail interference and the vorticity contour of missile were compared with respect to angle of attack. Experimental and numerical analysis results show that the wing-tail interference has significant effects on static stability of tail-controlled missile.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.323-336
• /
• 2003

Recently, the development of tunnel reinforcement method has been required relating to the shallow tunnelling in soft ground. In this study, the improvement method on tunnel stability is proposed by evaluating the efficiency of face reinforcement which enables to control extrusion of advance core, however, it is often neglected in urban tunnelling under the poor ground conditions. Systematic pre-confinement ahead of the face improves the tunnel stability, subsequently, displacement of the crown and surface settlement can be restrained by proper method. 3-dimensional numerical analysis including horizontal reinforcement modelling on a face is applied to estimate the behaviour of a tunnel in relation to the ground and reinforcement conditions. Consequently, extrusion at the face decreases significantly after using the horizontal reinforcement and the effect of reinforcement is much increased in case of applying the supplemental reinforcement ahead of the face together. Especially, confinement effect around the tunnel and the core is proved by means of the core reinforcement in poor ground conditions.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.46-51
• /
• 2007

A multi-purpose environmental monitoring system has been developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensors, for the purposes of monitoring large-scale structures and preserving natural environments. The monitoring system has been tested and evaluated in a possible outdoor condition, in view of the full-scale operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored in each channel, three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation and to clarify temperature influences an the system, in terms of the coupling of optical connectors and the OTDR stability. The results from the pseudo-cracking experiment agreed with the actual cracks, by means of calculation, based an the detected displacement values and their geometrical arrangement of the used sensor modules. The temperature change, ranging from 10 to $20^{\circ}C$ resulting from the 10-days free running operation, was found to influence the system stability of ${\pm}10{\mu}m$, primarily due to the coupling instability of the used optical connectors. It was found that fusion splicing, rather than the use of connectors, reduced the fluctuation dawn to ${\pm}2{\mu}m$. The specification and performance of various option modules have been demonstrated to show the capability of inspecting various physical quantities by use of the single system, which would be suitable for multi-purpose environmental monitoring.