• 지질공학
• /
• 제11권3호
• /
• pp.279-294
• /
• 2001

지하구조물 건설시에 구조물의 안정성을 확보하거나 우물을 굴착할 때 충분한 양의 지하수를 확보하기 위해서는 정확한 수리적 매개변수를 알아내는 것이 필수적이다. 본 연구에서는 금정산 화강암지역에 시추된 6개 시험공의 여러 심도에서 수압시험을 실시하고, Moye식과 Hvorslev식을 이용하여 수리전도도를 구하였다. 또한 수리전도도와 텔레뷰어검층 및 시추코어자료로부터 얻어진 단열빈도를 서로 비교하고, 이들간의 상관성을 구하였다. 그 결과, 대부분의 시험공에서 텔레뷰어 자료가 시추코어자료보다 수리전도도와의 상관성이 높으나, 상관계수는 0.5미만이다. 이것은 연구지역 화강암의 수리전도도가 단열빈도뿐만 아니라 단열의 간극, 길이, 연결성, 방향, 경사도 그리고 충전물 등과도 복합적으로 관련됨을 암시한다.

• 자원환경지질
• /
• 제27권3호
• /
• pp.289-294
• /
• 1994

This paper describes an effective utilization method of well logging data and boring cores for understanding the geology of Keoje-do area. Six holes were drilled in 1988-1989, and all rock cores were recovered. Nevertheless, seven kinds of logs were carried out in each borehole. The geologic situations of the drilling sites are accurately evaluated from a comparison between core descriptions and well logging data. Porosities and clay contents of sedimentary rocks can be calculated using the data of density and gamma-ray logs. Fractured zones are easily detected from the change in inside diameter of borehole by caliper log. Sonic, density and gamma-ray logging data clearly indicate alternated and dyke zones; the former can be detceted from an acoustic wave attenuation and a decline of compaction by sonic and density logs, the latter can be detected from the amount of potassium contents of bed rock and dyke by gamma-ray log.

• 건축역사연구
• /
• 제1권1호
• /
• pp.88-105
• /
• 1992

This dissertation aims to investigate the structure of Palsangjeon, a five story wooden pagoda in Pubjoo Temple which is the only wooden pagoda existing in Korea, by a comparative study of the Palsangjeon with Japanese counterparts. By doing so, the writer of the present investigation attempts to find out its structural originality. The main finding of this study are as follows. The upper part of Palsangjeon is constructed with square log frameworks called GuiTl and Sacheon-Ju around the central column. The four walls along Sacheon-Ju from the 1st level to the 3rd well resists the outside horizontal piressure. And Gui-Tl structure on the 5th level copes much better with shear force. So this frame consisting of Sacheon-Ju and log frameworks might be viewed an semi-core system, This core is supported once again by the frame of Go-Ju. That is to say. Go-Ju supports frame of Sacheon-Ju. And the frame of Pyeong-Ju on the 4th and the 5th levels also supports it. The frame of Go-Ju is supported by the frame of Pyeong-Ju on the 1st and the 2nd levels. So this structure is designed to resist the wind and also keep the balance by properly distributing vertical pressure. The plan and the elevational structure of Palsangjeon keep the balance by the perfect symmetric structure. And the frame of Sacheon-Ju forming semi-core system can resist both the lateral load and the vertical pressure for the balance of its structure. The five story pagoda in Horyuji used to stand on a central which is desigend to support the main body of the pagoda from the first level. The principles of balance is used between the Ha-Aag and short to react the rafter. Sacheon-Ju and edge column is against the lateral load. The structural jointing system is stable thanks to the log framewroks formed on every level. The five story pagoda in Horyuji poseses the structual system originated from the ancient wooden pagoda. The pagoda is found to express simple, sincere and straight forward form. On the other hand, it could be seen as a stucture resisting the earthquake and the lateral load, Palsangjeon is an excellent building which religions function is well harmonized with its structure and appearance. It not only functions extremely well as a regions place like other pagodas, but also excellently shows how multi-story wooden building should be structured.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2007년도 추계학술 발표회
• /
• pp.314-319
• /
• 2007

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.569-574
• /
• 2005

In this study, test standards were developed for performance verification of the high speed(350km/h) rolling-stock. The performance test system consist of three type tests; the component test for core item, the completed car test for combined function & operation and the trial driving test for compatibility & interrelationship with infrastructure.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 추계학술발표대회
• /
• pp.118-120
• /
• 2017

모바일 이동통신망의 Core 노드들은 2G CDMA, 3G WCDMA, 4G LTE 교환기를 비롯하여 IMS 및 다양한 부가장비들로 이루어져 있다. 최근 5G로 진화하는 과정에는 NFV(Network Function Virtualization)가 그 중심에 서 있다. NFV 환경에서는 기존 통신 노드와 다르게 범용서버 및 범용 운영체제가 주축이 되어, 일반 IT 툴로도 통신망 내부 노드의 로그분석이 용이해 졌다. 또한 다양하고 복잡한 Core 네트워크에서 빅데이터로 발생하는 로그 또한 머신러닝으로 분석이 가능하며, 운용에 활용할 수 있다. 따라서 본 연구에서는 vDPI, vMMSGW OS 로그를 대상으로 분석하였으며, 잠재되어 있는 문제점들을 확인할 수 있었다. 또한 어플리케이션의 비정형화 된 로그에서도 비정상적인 패턴들을 발견하여 대용량 트래픽이 발생하며 SLA가 유난히 높은 통신환경에서도 비지도 머신러닝 분석이 유용함을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.40-47
• /
• 1988

Our plywood manufacturing industries which entertained prosperous stage in late 1970's have come to be in face of the problems of conceedingly obtaining good quality logs and yield up-grading, which is considered by future-replaceable forest resources. In view of this point, manufacturing characteristic on softwood plywood using Japanese larch, pitch pine as domestic plantation species, and western hemlock as foreign species was studied. In this study, veneer- and plywood manufacturing yields were discussed in relation to log properties and veneer defects (knots). The summarized conclusions were as follows: 1. The majority of sample logs belonged to second grade on the standard. And, eccentricity of larch was the highest 11%, about 2 times those of pitch pine, hemlock. 2. Knot frequency of occurrence of larch reached 19% within log height 8m, and pitch pine 13% within 4m. Correspondingly, the log height of larch available for plywood manufacture was higher by about 2 times that of pitch pine. 3. In the knot types, most of knots of larch appeared dead, whereas those of pitch pine and hemlock appeared live. In size of knots, larch and hemlock showed relatively small 1-2cm dia. by 70% or more and pitch pine did the larger 24cm by 65%. Generally the more knot emerged in the inner side of veneer than the outer. 4. Plywood manufacturing yields by peeling with spindle revolution lathe were 37% in larch > 32% in hemlock> 26% in pitch pine. S. Jointed core veneer yields by peeling with outer perimeter back-up lathe were 55% in hemlock> 53% in larch> and 48% in pitch pine.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.265-265
• /
• 2022

Increased temperature caused by global warming has become a significant problem for the growth and production of crops. A high temperature has a direct or an indirect effect on crops, leading to a significant yield loss. The damage of a high temperature stress to rice depends on its developmental stage. In present study, we performed evaluate the heading date in different location, Yeoju and Miryang, during growth of Korean rice core set. The heading date for the 223 rice accession were evaluated in Yeoju City (37°23' 127°57') and Miryang City (35°50', 128°72') located on middle and southern part of Korea, respectively. The average temperature of a day was higher in Miryang during entire growth stage. Here, total 222 KRICE-Core set was analyzed by GWAS for the high temperature effect. GWAS results revealed the Chr07_26954556, a lead SNPs were significantly associated with delaying heading date of KRICE-Core set. Significance threshold was set with 6.0 > -log10(P), and Cross-Validation (CV) error suggested an optimal K value of 5 for the population based on the lowest cross-validation error K = 5.

• 정보과학회 논문지
• /
• 제42권4호
• /
• pp.442-450
• /
• 2015

본 논문에서는 시그니처 기반의 이거 하드웨어 트랜잭셔널 메모리(eager HTM)에서 발생하는 거짓 충돌을 줄이기 위한 방법을 제안한다. 이 방법에서는 각 트랜잭션이 실행 중에 접근하는 캐시 블록들을 추적한다. 그리고 다른 코어로부터의 요청에 대해 충돌이 없다는 증거를 추적한 정보가 제공하면, 시그니처 서브시스템이 충돌이라고 선언하더라도 그것을 무시하도록 조치한다. 따라서 제안한 방법을 사용하면 거짓 충돌에 의한 트랜잭션의 멈춤 또는 취소를 줄일 수 있다. 이 방법은 시그니처 기반의 이거 HTM을 구현하는 멀티코어 프로세서의 성능을 향상시키기 위해 사용할 수 있다. 16개의 코어로 구성된 LogTM-SE 시스템에서 스탠포드 대학에서 개발한 STAMP 벤치마크를 사용하여 실험한 결과, 제안한 방법을 사용할 경우 시스템의 성능은 평균 20.6% 만큼 향상되었다.

• 한국산업융합학회 논문집
• /
• 제19권3호
• /
• pp.109-124
• /
• 2016

The objective of this paper is to find the density, stiffness, and strength of truss-wall diamond corrugation model combined with pinwheel truss inside space. The truss-wall diamond corrugation (TDC) model is defined as a unit cell coming from solid-wall diamond corrugation (SDC) model. Pinwheel truss-wall diamond corrugation (P-TDC) model is made by TDC connected with pinwheel structure inside of the space. Derived ideal solutions of P-TDC is based on truss-wall and pinwheel truss model at first. And then it is compared with Gibson-Ashby's ideal solution. To validate the ideal solutions of the P-TDC, ABAQUS software is used to predict the density, strength, and stiffness, and then each of them are compared to the ideal solution of Gibson-Ashby with a log-log scale. Applied material property is stainless steel 304 because of having cost effectiveness. Applied parameters for P-TDC are 1 thru 5 mm diameter within fixed opening width as 4mm. In conclusion, the relative Young's modulus and relative yield strength of the P-TDC unit model is reasonable matched to the ideal expectations of the Gibson-Ashby's theory. In nearby future, P-TDC model is hoped to be applied to make sandwich core structure by advanced technologies such as 3D printing skills.