• Steel and Composite Structures
• /
• 제44권4호
• /
• pp.503-517
• /
• 2022

This paper presents the mechanical buckling of bi-directional functionally graded sandwich beams (BFGSW) with various boundary conditions employing a quasi-3D beam theory, including an integral term in the displacement field, which reduces the number of unknowns and governing equations. The beams are composed of three layers. The core is made from two constituents and varies across the thickness; however, the covering layers of the beams are made of bidirectional functionally graded material (BFGSW) and vary smoothly along the beam length and thickness directions. The power gradation model is considered to estimate the variation of material properties. The used formulation reflects the transverse shear effect and uses only three variables without including the correction factor used in the first shear deformation theory (FSDT) proposed by Timoshenko. The principle of virtual forces is used to obtain stability equations. Moreover, the impacts of the control of the power-law index, layer thickness ratio, length-to-depth ratio, and boundary conditions on buckling response are demonstrated. Our contribution in the present work is applying an analytical solution to investigate the stability behavior of bidirectional FG sandwich beams under various boundary conditions.

• Design & Manufacturing
• /
• 제17권4호
• /
• pp.14-23
• /
• 2023

The electric vehicle market is developing rapidly around the world. Also, parts of electric vehicles require precision.In order to produce high-precision motor cores,Press equipment must also have good precision. Drive motor cores are an important technology for electric vehicles. It uses a large high-speed press to mass-produce drive motor cores. Because it's a large high-speed press, there are many reasons why the precision is not good. One of the causes is vibration and noise. Recently, as environmental demands have become stricter, regulations on noise and vibration have been strengthened. It is important for press machines to reduce vibration first for sound insulation and dust proofing. This is because the "breakthrough" phenomenon occurs in the press. Dynamic precision is the precision under the load of the press, Design considering strain and stiffness shall be made. Vibration and noise may occur due to SPM of high-speed press,And vibration and noise can cause structural deformation of the press. Structural deformation of the press can affect the precision of the product.Noise and vibration also cause problems for workers and work environments. Problems with vibration and noise occur during press processing, and vibration and noise lead to damage to the mold or defects in the product. Reliability in high-quality technology must be secured with low noise and low vibration during press processing. Modular shape and deformation energy effects were analyzed through finite element analysis. In this study, a study on vibration and noise countermeasures was conducted through finite element analysis of a large high-speed press.

• Earthquakes and Structures
• /
• 제26권1호
• /
• pp.31-48
• /
• 2024

In order to get a better understanding of seismic performance of exterior beam-column joint, reciprocating loading tests with variable loading speeds or axial forces were carried out. The main findings indicate that only few cracks exist on the surface of the joint core area, while the plastic hinge region at the beam end is seriously damaged. The damage of the specimen is more serious with the increase of the upper limit of variable axial force. The deflection ductility coefficient of specimen decreases to various degrees after the upper limit of variable axial force increases. In addition, the higher the loading speed is, the lower the deflection ductility coefficient of the specimen is. The stiffness of the specimen decreases as the upper limit of variable axial force or the loading speed increase. Compared to the influence of variable axial force, the influence of the loading speed on the stiffness degradation of the specimen is more obvious. The cumulative energy dissipation and the equivalent viscous damping coefficient of specimen decrease with the increase of loading speed. The influence of variable axial force on the energy dissipation of specimen varies under different loading speeds. Based on the truss model, the biaxial stress criterion, the Rankine criterion, the Kent-Scott-Park model, the equivalent theorem of shearing stress, the softened strut-and-tie model, the controlled slip theory and the proposed equations, a calculation method for the shear capacity is proposed with satisfactory prediction results.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4367-4381
• /
• 2023

Nuclear power plants are increasingly being equipped with digital I&C systems. Although some probabilistic safety assessment (PSA) models for the digital I&C of nuclear power plants have been constructed, there is currently no specific internationally agreed guidance for their modeling. This paper presents an initiative by the OECD Nuclear Energy Agency called "Digital I&C PSA - Comparative application of DIGital I&C Modelling Approaches for PSA (DIGMAP)", which aimed to advance the field towards practical and defendable modeling principles. The task, carried out in 2017-2021, used a simplified description of a plant focusing on the digital I&C systems important to safety, for which the participating organizations independently developed their own PSA models. Through comparison of the PSA models, sensitivity analyses as well as observations throughout the whole activity, both qualitative and quantitative lessons were learned. These include insights on failure behavior of digital I&C systems, experience from models with different levels of abstraction, benefits from benchmarking as well as major contributors to the core damage frequency and those with minor effect. The study also highlighted the challenges with modeling of large common cause component groups and the difficulties associated with estimation of key software and common cause failure parameters.

• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.203-218
• /
• 2024

Beam-column joints in the frame structure are at high risk of brittle shear failure which would lead to significant residual deformation and even the collapse of the structure during an earthquake. In order to improve the damage issue and enhance the recoverability of the beam-column joints, a sector lead rubber damper (SLRD) has been developed. The SLRD can increase the bearing capacity and energy dissipation capacity, and also demonstrating recoverability of seismic performance following cyclic loading. In this paper, the hysteretic behavior of SLRD was experimentally investigated in terms of the regular hysteretic behavior, large deformation behavior and fatigue behavior. Furthermore, a parametric analysis was performed to study the influence of the primary design parameters on the hysteretic behavior of SLRD. The results show that SLRD resist the exerted loading through the shear capacity of both rubber parts coupled with the lead cores in the pre-yielding stage of lead cores. In the post-yielding phase, it is only the rubber parts of the SLRD that provide the shear capacity while the lead cores primarily dissipate the energy through shear deformation. The SLRD possesses a robust capacity for large deformation and can sustain hysteretic behavior when subjected to a loading rotation angle of 1/7 (equivalent to 200% shear strain of the rubber component). Furthermore, it demonstrates excellent fatigue resistance, with a degradation of critical behavior indices by no more than 15% in comparison to initial values even after 30 cycles. As for the designing practice of SLRD, it is recommended to adopt the double lead core scheme, along with a rubber material having the lowest possible shear modulus while meeting the desired bearing capacity and a thickness ratio of 0.4 to 0.5 for the thin steel plate.

• 융합보안논문지
• /
• 제23권4호
• /
• pp.33-41
• /
• 2023

최근 지능형 지속위협(APT) 공격조직은 국가핵심기술을 보유한 기업이나 기관을 대상으로 다양한 취약점 및 공격기법을 악용해서 랜섬웨어를 유포한 후 금전을 요구하거나 국가적으로 중요한 산업기밀 자료를 절취해서 암시장(다크웹)에 유통시키거나 제3국에 판매 또는 기술격차를 줄이는데 활용하는 등 국가차원의 보안대비가 필요하다. 이 논문에서는 Kimsuky, Lazarus 등 한국을 대상으로 APT 공격으로 산업기밀유출 피해를 입혔던 공격조직의 공격수법을 MITRE ATT&CK 프레임워크로 분석하고, 기업의 보안시스템이 추가적으로 갖추어야 할 사이버 보안관련 관리적, 물리적 및 기술적 보안요구사항 26개를 도출하였다. 또한, 보안 요구사항을 실제 보안업무에 활용할 수 있도록 보안 프레임워크 및 시스템 구성방안도 제안하였다. 이 논문에서 제시한 보안요구 사항은 보안시스템 개발 및 운영자들이 기업의 산업기밀 유출 방지를 위한 보안업무에 활용할 수 있도록 실질적인 방법 및 프레임워크를 제시했으며 향후 이 논문을 기반으로 다양한 APT 공격그룹의 고도화·지능화된 공격을 분석하고 관련 보안대책 연구가 추가적으로 필요하다.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.91-102
• /
• 2024

Rapid progress is being made in foundational technology research and engineering for the construction of floating offshore wind farms. There is active development of technology for detachable mooring systems, which have strengths in addressing maintenance issues that arise in floating offshore wind farms and enhance their economic viability. Conventional detachable mooring systems use Kenter links inserted into the middle of mooring chains, which require excessive time for retrieval by Anchor Handling Tug Supply (AHTS) vessels during detachment operations. Moreover, these operations pose risks of link damage and accidents. Therefore, there is a demand for the development of a new concept of detachable mooring systems. The proposed detachable mooring system in this study simultaneously integrates a fairlead chain stoppers (FCS) and submersible mooring pulleys (SMP), which enables all operations to be conducted on the AHTS vessel without underwater tasks. This study detailed the design and safety evaluation of the SMP, a core component of the detachable mooring system, based on the minimum breaking load (MBL) of selected mooring lines according to the capacity of the floating platform. It referenced international codes (AISC Specification for Structural Steel Buildings D5, Pin-Connected Members) for design verification and performed finite element analysis to evaluate the strength of major components in installation and operation scenarios. Additionally, procedures and techniques for evaluating the structural strength of components under uncertain boundary conditions were proposed.

• 암석학회지
• /
• 제25권3호
• /
• pp.211-230
• /
• 2016

금왕단층(Keumwang fault)을 따라 실시한 자세한 지질조사를 통해 쥐라기 후기 및 백악기 초기에 발생한 연성 전단작용 이후에 취성단층 특징을 보이는 재활동이 여러 번 일어났음이 밝혀졌다. 금왕단층은 단층비지로 이루어진 약 10~50 m 폭의 단층핵과 이를 둘러싸고 있는 약 30~100 m 폭의 단층손상대로 이루어져 있다. 연구지역 내 선캠브리아 누대 편마암과 쥐라기 화강암 내에서는 서로 다른 변형환경, 변형시기, 변형기작에 의해 구별되는 최소 6단계의 단층운동이 관찰된다. 첫 번째 단계의 전단운동은 쥐라기 후기 및 백악기 초기에 일어났으며, 좌수향 연성 전단에 의해 압쇄암 계열이 금왕전단대를 따라 형성되었다. 두 번째 단계에서는 주로 취성변형 환경에서 금왕단층을 따라 파쇄암 계열이 압쇄암 계열 위에 중첩되었다. 모암에서 초파쇄암으로 가까워질수록 반상변정의 원마도와 기질의 함량이 증가한 것은 단층의 중심으로 갈수록 파쇄유동이 증가한 것을 지시한다. 세 번째 단계에서는 두 번째 단계에 형성된 파쇄암대에 단층비지대가 중첩되었으며, 좌수향 주향이동 운동에 의해 단층을 따라 퇴적 분지(음성, 풍암분지)들이 형성되었다. 단층비지에 떠있는 파쇄암 잔유물들은 취성변형 환경에서 금왕단층이 여러 번 재활동 했음을 지시한다. 네 번째 단계에서는 금왕단층이 재활동하여 퇴적 분지 내에 안행상의 습곡, 절리 및 단층 등이 형성되었다. 대부분의 전단변형이 엽리 및 전단면을 따라 집중된 반면, 퇴적 분지 내 이암에서는 전반적으로 변형이 단층손상대에 분산된 양상을 보인다. 네 번째 단계 동안 세립의 안산암이 관입을 하였다. 다섯 번째 단계에서는 안산암에 우수향 주향이동 단층운동을 지시하는 전단면과 전단띠가 발달하였다. 단층비지의 ESR(Electron Spin Resonance) 연대 자료에 의하면, 여섯 번째 단계에서는 활동기에 단층운동이 집중적으로 일어나고 휴지기에는 일어나지 않았으며, 주향방향을 따라 단층운동이 이동하는 경향을 보여준다.

• 동국한의학연구소논문집
• /
• 제4권
• /
• pp.25-52
• /
• 1995

'Sang Han Lon' became the sources for treatment and prescription in the Oriental medicine. After that, for some 1800 years the various writings for studying in many ways more than 1000 books which many old sages really intended to inquire into and study the value of books. It is considered that it is the result which the old sages tried to grope for many-sided directions in order to understand 'Sang Han Lon'. In this study, I tried to inquire into prescription and its relevant medicinal substances, that is to say, the crystalization of the physiology, pathology and treating method on the basis of the academic sources of his thoughts. The method to approach is "from what basis of thought system was 'Sang Han Lon' derived first of all?" Secondly, how was the thought system, which became the basis of 'Sang Han Lon', applied to concretely? I studied on the basis of the above important two problems. It is well known to everybody that 'Sang Han Lon' succeeded to the tradition of Naekyung(內經) as well as Cwuyek(周易, Chinese classic on divination). Besides, I inquired into and arrived at conclusion as follows that how the viewpoint on the balance(平衡觀), which was one of the common point between. Cwuyek(周易) and medical science in case of the 'Sanghan prescription'(傷寒方), was applied to concretely. 1. In naming, it is considered that from the same interconnection which the common point with Cwuyek(周易) was the same as obtaining the imigination(取象), the imagination was obtained and was named. 2. In case of being concerned in the gastro-intestinal track, namely, the core of the balance and harmony with the balance and harmony being emphasized, '理中'(It implies 'taking care of gasstro-intestinal track')" and '建中'(It implies 'establishing of gastro-intestinal track'), that is to say, '中'(It implies 'taking care of' & 'establishing of gastro-intestinal track') was emphasized much more. 3. In case of treatment taking advantage of three kinds of medicine in draught, powder and pills in the prescription, while treating during adjusting the slowness and fastness, I maintained the harmony not to damage the righteousness(正氣). 4. In case of the prescription, when exhaling(發散), astringing(收斂), loosing bowels, protecting the gastro-intestinal track and vomitting, he used the medicinal sustances in order to protect the gastro-intestinal track and treated not to damage the righteousness. 5. Especially, in case of the prescription in order to adjust the negative and positive principle of inside-outside(素囊陰陽), he composed of medicinal substances relevant to hot, cold, spicy and sour(寒熱辛酸) in conformity with the prescription and I paid much more attention to the one-sided treatment. Considering the various prescriptions, it is regarded that the adjusting prescription is kept its balance. 6. In the way of processing the medicinal substances in order to change effect of medicine in conformity with the reenactment, he tried to plan the balance of '一升一降' with the decrease of RHEI RADIX ET RHIZOMA(大黃) and increase of wine. 7. In boiling the medicine, he boiled the composed medicine in the time sequence for the purpose of adjusting the slowness and fastness and adapted to harmony of the negative and positive principle(陰陽調和) on the essence function(體峻用純). 8. In taking medicine, he tried to reduce the time of taking the medicine in case of being boiled slowly and tried to increase the dosage and eventually he planned the balance of one time slowness and one time fastness. As I inquired into the above result, a few steps for protecting method to boil the relevant medicinal substances, how to take the medicine and how to process the composed medicinal substances in order to change the effect of medicine can make the human body, which the disease penetrate into, go forward to the righteousness(正氣) and what is much beter, it is considered that this protecting method can be a carefully considerable one in order to protect the righteousness and can subdue the disease, not to damage the gastro-intestinal track and there can exist the viewpoint of balance(平衡觀) on its core.

• 한국응용곤충학회지
• /
• 제56권2호
• /
• pp.171-177
• /
• 2017

식물기생성 선충인 뿌리혹선충과 뿌리썩이선충은 국내에서 생강을 포함한 수입 구근류에서 주로 검출되는 검역대상 해충이다. 그러나 이러한 선충류가 검출된 수입 생강의 경우 적절한 소독처리기준이 마련되어 있지 않아 폐기 및 반송처리로 인한 경제적 손실이 발생하고 있다. 본 연구에서는 생강에 침입한 검역 대상 선충의 사멸을 위한 식물소독처리 기준 마련을 위해 뿌리혹선충과 뿌리썩이선충을 사멸할 수 있는 온탕침지법에 관하여 조사하였다. 그 결과, 뿌리혹선충과 뿌리썩이선충은 각각 $48^{\circ}C$와 $49^{\circ}C$에서 30초간의 온탕침지 처리로 사멸되었다. $52.5^{\circ}C$로 설정된 60 L의 항온수조에 침지된 생강의 열전도 조사에서 생강 중심부와 내부 5 mm 두께의 온도가 $50^{\circ}C$까지 도달하기까지는 각각 10~32분과 6~16분이 소요되었으며 $51^{\circ}C$에서 30분 동안 온탕침지한 생강은 정상적으로 생육하였다. 본 결과를 바탕으로 뿌리혹선충의 유충을 생강에 인공접종 한 후 $51^{\circ}C$에서 30분간 온탕침지 하였을 때 처리한 선충이 모두 사멸되었다. 따라서 이상의 온탕침지 처리 조건은 생강에 영향을 주지 않고 두 종의 선충을 사멸시킬 수 있는 식물소독법의 기초자료가 될 것이다.