• 공학교육연구
• /
• 제20권5호
• /
• pp.50-58
• /
• 2017

The purpose of this study is to explore the core competencies of the Fourth Industrial Revolution in the major newspaper articles of social network analysis and to examine the core competencies required by each field and target. To do this, we reviewed prior research focusing on core competency concepts and core competencies of engineering students, and analyzed 227 articles related to core competencies of the 4th Industrial Revolution, focusing on five major newspapers. Through analysis, we analyzed social network with 118 refined core competency keywords. As a result of the research, it was found that core competencies of the 4th Industrial Revolution are the degree centrality in terms 'creativity', 'problem solving ability', 'convergence ability', 'collaboration ability', 'conductivity', 'software ability', 'human literacy', 'personality' order. Also, as a result of the analysis of the ego centric network by field and target, the required core competencies of university and industry were found to be different. Through these discussions, it is necessary to restructure the core competence of engineering students in order to nurture the engineering talents necessary for the 4th Industrial Revolution.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.229-236
• /
• 2016

Objective: This study aimed, first, to develop core strength training equipment with elderly-friendly, easy-to-use features and, second, to investigate the effect of core strength training using the equipment on the performance and stability of the elderly in activities of daily living. Method: In this study, we developed training equipment with a stability ball that can be used for performing core strength exercises in the elderly. Twenty-three elderly subjects (age: $77.87{\pm}6.95years$, height: $149.78{\pm}6.95cm$, and weight: $60.57{\pm}7.21kg$) participated in this study. The subjects performed the core strength training exercise with 16 repetitions for 8 weeks (2 repetitions per week). Performance in activities of daily living was assessed by using the Short Physical Performance Battery (SPPB), a test of going up and down 4 stairs, and one-leg static balance test. Stability was quantified as changes in the center of pressure (COP) and C90 area. Results: With the core strength equipment, trunk core strength exercise could be performed by pulling or pushing a rope with 2 hands on the stability ball. During the task, the tension in the rope was manipulated by a motor connected to the rope and the COP of the subject was measured by 4 load cells mounted in the equipment. Our results showed that the SPPB score was significantly higher (p < .05), the time to complete the "going up and down 4 stairs" test was significantly shorter (p < .05), and one-leg static balance statistically improved under an eyes-open condition (p < .05) after as compared with before the core strength training. The changes in the COP in the anteroposterior and mediolateral directions, and C90 area were significantly lower in the posttest (p <. 05) than in the pretest. Conclusion: The core strength training exercise using the equipment developed in the present study improved the performance and stability of the elderly in activities of daily living.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.798-798
• /
• 2006

• BMB Reports
• /
• 제34권1호
• /
• pp.51-58
• /
• 2001

Attempts using in vitro and in vivo selection procedures have been made to search for hammerhead ribozymes that have higher activities than the wild-type ribozyme and also to determine whether other sequences might be possible in the catalytic core of the hammerhead ribozyme. Active sequences selected in the past conformed broadly to the consensus core sequence except at A9, and no sequences were associated with higher activity than that of the hammerhead with the consensus core, an indication that the consensus sequence derived from viruses and virusoids is probably the optimal sequence [Vaish et al. (1997) Biochemistry 36, 6495-6501]. Recently, during construction of ribozyme expression vectors, we isolated a mutant hammerhead ribozyme, with an insertion of G between A9 and G10.1, that appeared to show significant activity [Kawasaki et al. (1996) Nucleic Acids Res. 24, 3010-3016; Kawasaki et al. (1998) Nature 393, 284-289]. We, therefore, characterized kinetic properties of the G-inserted mutant ribozymes in terms of the NUX rule. We demonstrate that the NUX rule is basically applicable to the G-inserted ribozymes and, more importantly, one type of G-inserted ribozyme was very active with $k_{cat}$, value of $6.4\;min^{-1}$ in 50 mM Tris-HCl (pH 8.0) and 10 mM $MgCl_2$ at $37^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.712-719
• /
• 2005

인터넷과 컴퓨터 네트워크의 발전에 힘입어 차세대 컴퓨팅 패러다임으로 유비쿼터스 컴퓨팅이 등장하였고, 이를 실현하기 위한 핵심 기술로 RFID(Radio Frequency Identification) 기술이 주목받고 있다. 이러한 RFID 응용 시스템에서 상호간의 데이터 교환을 위해 MIT Auto-ID Center 에서는 물리적 객체의 정보를 표현하기 위한 표준 언어로 XML(Extensible Markup Language) 기반의 PML(Physical Markup Language)을 제안하여 사용하고 있다. 하지만 Auto-ID Center에서 제시한 PML은 객체의 정보를 기술하기 위한 핵심부분만 정의 되어 있고, 실제 적용에 필요한 부분은 별도로 확장 정의하여 사용하도록 되어 있다. 이에 본 논문에서는 Auto-ID Center의 PML Core에 기반하여 RFID 응용 서비스에서 전자태그 정보 처리를 위해 사용될 수 있는 객체 타입을 정의하고 물류 유통 서비스 분야에 적용할 수 있도록 객체 정보 데이터 모델을 설계하였다.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.319-325
• /
• 2010

Electrical discharge machining (EDM) is an attractive machining technique but it requires electrically conductive ceramic materials. In this study, Alumina matrix composites reinforced with CNTs were fabricated through CNT purification, mixing, compaction and spark plasma sintering (SPS) processes. $Al_2O_3$ nanocomposites with the different CNT concentrations were synthesized. The mechanical and electrical characteristics of $Al_2O_3$/CNTs composites were examined in order to apply the materials to the EDM process. In addition, micro-EDM using wire electrical discharge grinding (WEDG) was conducted under the various EDM parameters to investigate the machining characteristics of machined hole by Field Emission Scanning Electron Microscope (FE-SEM). The results show that $Al_2O_3$/CNTs 10%Vol. was more suitable than the other materials because high conductivity and large discharge energy caused violent sparks resulting in bad machining accuracy and surface quality.

• 설비공학논문집
• /
• 제28권4호
• /
• pp.145-152
• /
• 2016

For a general office building having a center core, the distinction between the outer wall and the compartment should be clear, and it should be set at a stack effect pressure distribution acting on the respective compartment by a relative area ratio of the respective leak compartment. In the case of office buildings with an independent core for core there, some blocks of shares and exterior pressure distribution in buildings and office buildings typically have different characteristics. Therefore, if the stack effect reduction measures, designed on the basis of a general office building are applied to a stand-alone building, the core of the building should reflect the unique pressure distribution characteristics. This study, performed as part of the object corresponding to the flat plan of the building in the diversification trend, analyzed the stack effect that actually occurs in an office building having the properties intended for stand-core construction, and thus on the basis of and tested by the method of using a conventional stack effect reduction measures. Reviewed in the study, an independent cored office building that does not have the air flow path through the specific space with respect to the center core type office building has a feature, and the variation in characteristics of the pressure distribution inside the building according to this air flow path stack effect was reduced by a variety of measures that should be applied to determine the application.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.229-235
• /
• 2015

Objectives: To determine and compare the fracture resistance of endodontically treated maxillary central incisors restored with different posts and cores. Materials and Methods: Forty-eight upper central incisors were randomly divided into four groups: cast post and core (group 1), fiber-reinforced composite (FRC) post and composite core (group 2), composite post and core (group 3), and controls (group 4). Mesio-distal and bucco-lingual dimensions at 7 and 14 mm from the apex were compared to ensure standardization among the groups. Twelve teeth were prepared for crown restoration (group 4). Teeth in other groups were endodontically treated, decoronated at 14 mm from the apex, and prepared for posts and cores. Resin-based materials were used for cementation in groups 1 and 2. In group 3, composite was used directly to fill the post space and for core build-up. All samples were restored by standard metal crowns using glass ionomer cement, mounted at $135^{\circ}$ vertical angle, subjected to thermo-mechanical aging, and then fractured using a universal testing machine. Kruskal-Wallis and Mann-Whitney U tests were used to analyze the data. Results: Fracture resistance of the groups was as follows: Control (group 4) > cast post and core (group 1) > fiber post and composite core (group 2) > composite post and core (group 3). All samples in groups 2 and 3 fractured in restorable patterns, whereas most (58%) in group 1 were non-restorable. Conclusions: Within the limitations of this study, FRC posts showed acceptable fracture resistance with favorable fracture patterns for reconstruction of upper central incisors.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.635-639
• /
• 2008

In this paper, experimental studies of the regrinding of tungsten carbide (WC-Co) tools for high-speed machining were conducted. Regrinding and a subsequent evaluation test were carried out for a flat endmill tool with diameters of 10 mm and 3 mm using a CNC five-axis tool grinder and a CNC three-axis machining center. Tool wear on the two types of endmill tools increased as the cutting length increased, and the tool wear was not influenced by the regrinding state. In case of the micro endmill with a tool diameter of 3 mm, the effective regrinding time was determined for a flank wear threshold of 0.3 mm considering the tool life according to cutting length. The tool lives of the 10 mm and 3 mm endmill tools were increased by 80% and 72%, respectively. This conclusion proves the Feasibility of the recycling of tungsten carbide materials in the high-speed machining of high-hardened materials for industrial applications.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2004년도 하계학술대회
• /
• pp.328-333
• /
• 2004

SK Telecom은 2000년 10월 세계 최초로 기존 IS-95A/B망에서 지원하였던 속도인 14.4Kbps나 56Kbps 보다 훨씬 빠른 최고 144Kbps로 무선인터넷이 가능한 CDMA2000 IX를 상용화 하였다. 또한, 2002년 1월에는 CDMA2000 IX보다 15배 이상 빠른 최대 2.4Mbps가 가능한 동기식 3세대 망인 CDMA2000 IxEV-DO를 세계 최초로 상용화 하였다. 이러한 초고속 무선 인터넷 서비스를 위해서 패킷 데이터 처리에 필수적인 PDSN(Packet Data Serving Node), HA(Home Agent), AAA(Authentication, Authorization and Accounting) 등의 노드들로 구성된 Packet Core Network(이하 PCN)이 도입되었으며, 이에 대한 운용 및 관리 방안이 중요한 issue로 등장하였다. 본 논문에서는 기존의 음성 서비스 관리를 위한 망관리 시스템(Network Management System)과는 다른 개념으로 관리되어야 할 패킷 서비스를 위한 NMS 구축 방안을 제시하고, 필수적인 관리 정보 및 서비스 관리를 위한 방향을 제시한다.