• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.417-430
• /
• 1997

The purpose of this study was to compare the fracture resistance of copy-milled and conventional In-Ceram crown. Four groups of ten uniform sized all-ceramic crowns were fabricated. In-Ceram Spinell and In-Ceram Alumina crowns were fabricated as control group, Celay In-Ceram Spinell and Celay In-Ceram Alumina crowns were fabricated as test group. All specimen were cemented on stainless steel master die with resin cement, and stored in $37^{\circ}C$ water for 1 day prior to loading in Instron testing machine. Using a steel ball at a crosshead surfed of 0.5mm/min, the crowns were loaded at $30^{\circ}C$ angle until catastrophic failure occurred. The results obtained were as follows : 1. With the value of $984.8N{\pm}103.67N$, the strength of Celay In-Ceram Alumina crowns had a significantly higher fracture strength than conventional In-Ceram Alumina crowns ($876.2N{\pm}92.20N$) (P<0.05) 2. The fracture strength of Celay In-Ceram Spinell crowns($706.3{\pm}70.59N$) was greater than that of conventional In-Ceram Spinell crowns($687.4{\pm}90.26N$), but there was no significant difference(P>0.05). 3. The In-Ceram Alumina crowns had a significantly higher fracture strength than In-Ceram Spinell crowns in both methods(P<0.05). 4. Ther order of fracture strength was as followed : Celay In-Ceram Alumina, In-Ceram Alumina, Celay In-Ceram Spinell and In-Ceram Spinell crowns

• 한국노년학
• /
• v.40 no.2
• /
• pp.325-340
• /
• 2020

Early diagnosis and intervention of dementia is critical to minimize future risk and cost for patients and their families. The purpose of this study was to develop and validate Figure-Copy Test(FCT), as a new dementia screening test, that can measure neurological damage and cognitive impairment, and then to examine whether the grading precesses for screening can be automated through machine learning procedure by using FCT imag es. For this end, FCT, Korean version of MMSE for Dementia Screening (MMSE-DS) and Clock Drawing Test were administrated to a total of 270 participants from normal and damaged elderly groups. Results demonstrated that FCT scores showed high internal constancy and significant correlation coefficients with the other two test scores. Discriminant analyses showed that the accuracy of classification for the normal and damag ed g roups using FCT were 90.8% and 77.1%, respectively, and these were relatively higher than the other two tests. Importantly, we identified that the participants whose MMSE-DS scores were higher than the cutoff but showed lower scores in FCT were successfully screened out through clinical diagnosis. Finally, machine learning using the FCT image data showed an accuracy of 73.70%. In conclusion, our results suggest that FCT, a newly developed drawing test, can be easily implemented for efficient dementia screening.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.5
• /
• pp.69-75
• /
• 2000

Investigators who study on combustion in the cylinders of reciprocating piston type internal combustion engines have been encountered embarrassments due to the difficulties of adjusting specific parameter without interfacing other parameters such as cylinder wall temperature, composition of gas in the cylinder, existence of cylinder lubricant etc. Rapid compression expansion machine, the position and speed of piston of which are able to be controlled by means of a system controlled electrically, and actuated hydraulically could be utilized as one of the most preferable countermeasures against those difficulties. Several units of rapid compression expansion machines were developed but the speed up of frequency of piston movement still is the problem to be improved to copy with actual speed of internal combustion engines. Authors designed and manufactured a new rapid compression-expansion machine electrically controlled, hydraulically actuated, and computer programed and then examined the performance of one. Results of a set of experiments revealed acquirements of certain improvement on frequency of piston movement preserving the stability of system response and reproducing accurate compression ratio of cylinder, those are the key function for the in-cylinder combustion experiments on internal combustion engines.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.82-87
• /
• 1998

Laser printer, faximile and copy machine are a few examples of OA(office automation) system. In such a system, the reflecting mirror has been employed for transmitting a target image to optical device. Therefore, to develope a good quality of optical system, the quality control of optical mirror was required. In recent years, considerable efforts have been directed toward the development of automated optical glass inspection system because the inspection is eye-fatigue and monotonous job for humans to perform. In this paper, we propose a inspection system applying algorithm of image processing for detecting defects of optical glass such as pinhole, scratch. From the experiments, the proposed inspection system shows reliable results.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.10
• /
• pp.415-420
• /
• 2017

Virtualization technique of OS-level is a new paradigm for deploying applications, and is attracting attention as a technology to replace traditional virtualization technique, VM (Virtual Machine). Especially, docker containers are capable of distributing application images faster and more efficient than before by applying layered image structures and union mount point to existing linux container. These characteristics of containers can only be used in layered file systems that support snapshot functionality, so it is required to select appropriate layered file systems according to the characteristics of the containerized application. We examine the characteristics of representative layered file systems and conduct write performance evaluations of each layered file systems according to the operating principles of the layered file system, Allocate-on-Demand and Copy-up. We also suggest the method of determining a appropriate layered file system principle for unknown containerized application by learning block I/O usage history of each layered file system principles in artificial neural network. Finally we validate effectiveness of artificial neural network created from block I/O history of each layered file system principles.

• IE interfaces
• /
• v.12 no.1
• /
• pp.68-78
• /
• 1999

A noncircular cutting such as a piston cutting has depended on the copy-machining because of its complex shape. But the copy-machining needs a master model and brings about a low quality of the piston caused by being worn out of the master model. And the lower cutting speed reduces the productivity. In this paper, for solving these problems, a specialized software system and its subsequent procedure are presented. The shape of a piston consists of an oval, an offset, recesses, and eccentricities. The paper describes these shapes as a consistent equation that is a function of the rotational angle and the position of longitudinal direction(Z-axis). It is simple to define the characteristic geometry of a piston and to generate a tool path for CNC machining. This paper proposes the a proper structure of a 4-axes CNC(Computerized Numerical Control) lathe for machining the piston. As well as X-axis and Z-axis, are attached to the machine a C-axis for rotation and a Y-axis for higher speedy prismatic motion parallel to X-axis.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.20-25
• /
• 2001

In recent years, the concern about a user center design in increasing, and it's needed to task a user's visual cognitive characteristics for information presentation. Then this study aims to grasp user's cognitive characteristics about the information presentation by analyzing the fixation points. In the experiment, actually subject operated a copy machine. Recorded the fixation point movement of the operation panel by the eye mark recorder. Analysis examined the screen interface of the operation panel from the field of a fixation point trace. The top down type fixation oder by experience or the context became clear as a result. Furthermore, the difference of the fixation order by skill level was also examined. In this study, it was assumed that to grasp the visual cognitive characteristics becomes the key of efficient information.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.204-211
• /
• 1994

Micro array lens systems are designed for a faximile or copy machine. The array type is hexagonal. Diameter of a lens is 0.16 mm and the distance of the center of the nearest neighbor is 0.192 mm. The magnitude of the lens system is 1:1. Working distane is 10.55 mm and the spot size is less than 0.04 mm radius on axis and 0.20 mm off-axis in case of single layer system. Working distance is 7.90 mm and the spot size is less than 0.07 mm radius on axis and 0.09 mm radius off axis in case of double layer system. Performance of single layer micro array lens system and double layer micro array lens system are compared with the characteristics of the ray fans.y fans.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.104-110
• /
• 2006

It is a study on the design of a cam profile for diesel engine SOHC. It is used a reverse engineering method without the usual copy processing. It draws up the contour data from an actual cam and processes by CNC. The profile of the cam is reappeared to be up to operational specifications that are the opening and shutting time, lift, speed and acceleration of the inhalation and escape valves. While the cam operating, the noise and vibration are occurred by the sudden change of speed. The new design of cam profile is suitable fur the valve operations to be smooth. We propose the design method of a cam profile far the reappearance of an actual cam. It is proved to be the propriety about the design of the cam profile through the processing, measurement, and comparison of the cam profile.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.280-285
• /
• 2002

Copy machines have been used in the 3 dimensional shape machining like the non-sphere surface. This study is intended to show the possibility of manufacturing of a non-sphere shape without a exclusive CAM(Computer Aided Manufacturing) software in the process of metallic mold. It has been examined under the two types of working conditions. One is a cutting by manual programming and the other is a cutting by a general-purpose CAM software. Two kinds of output data were compared and analyzed, and data by a manual program were discovered more accurate than those of a general-purpose CAM software. In this study, I came to a conclusion it is possible to manufacture a 3 dimensional shape without a exclusive CAM software.