• Archives of Pharmacal Research
• /
• v.2 no.1
• /
• pp.35-47
• /
• 1979

In order to increase the dissolution rate of furosemide(4-choro-N-furfury1-5-sulfamoy1 anthranilic acid_, various ratio coprecipitates with water-soluble polymers, such as polyvinylpyrrolidone and polythylene glycol, of different molecular weight, were prepared and quantitatively studied by comparing their dissolution characteristics of furosemide at powder state and at nondisintegrating disk state containing constant surface area at various temperatures and rotating velocities. The dissolution characteristics of furosemide from pure furosemide disks and 1:2(w/w) furosemide-PVP coprecipitate disks were in accordance with Noyes-Nernst equation and the rate constant of dissolution was proportional to the square root of rotating velocity of the disks. The intrinsic rate of dissoluton at 150 rpm, 37.deg.C was $2.21{\times}10^{-7}$ for the PVP 10, 000 COPRECIPITATE, $1.64{\times}10^{-7}$ for the PVP 40, 000 coprecipitate, and$ 1.44 {\times} 10^{-7}$for the PVP 360, 000 corprecipitate, while the rate was $1.27{\times}10^{-8}M/cm^{2} min$ for pure furosemide, repectively. The activation energy of dissolution was about 17, 000 for furosemide and about 7, 300 cal/mole for the 1:2 furosemide PVP 40, 000 coprecipitate, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.2
• /
• pp.43-47
• /
• 1988

In order to increase the dissolution characteristics of relatively water-insoluble metoclopramide (MCP), coprecipitates of MCP with polyvinylpyrrolidone (PVP), polyethylene glycol (PEG) 1000, 4000 or 6000 were prepared in various drug to polymer ratios. The dissolution rate of MCP-PVP coprecipitate was greater than those of MCP alone, MCP-PVP physical mixture and MCP-PEG coprecipitates. The dissolution rate of MCP-PEG 6000 coprecipitate was greater than those of MCP-PEG 1000 and MCP-PEG 4000 coprecipitates. The dissolution half-lives $(T_{50%})$ for MCP alone and 1:5 (w/w) MCP-PEG 6000 coprecipitate were determined by the log-probit method at $37^{\circ}C$ and found to be 4.17 and 0.98 min, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.3
• /
• pp.155-161
• /
• 1989

Coprecipitates of chlorpropamide (CPA)-sodium deoxycholate (DC-Na) were prepared at various ratios of CPA to the DC-Na. The X-ray diffraction and DSC measurements indicated that CPA in 1:1 and 1:3 w/w CPA-DC-Na coprecipitates did not exist in amorphous form, but the others were amorphous. The dissolution rate of CPA from the CPA-DC-Na coprecipitates increased in distilled water and KP V 2nd disintegration test fluid (pH 6.8), but decreased extremely in KP V 1st disintegration test fluid (pH 1.2). The dissolution rates of CPA-DC-Na coprecipitates were compared with those of CPA alone and CPA-DC-Na physical mixtures. Especially, it was found that the dissolution rate of CPA markedly increased in the case of 1:5 CPA-DC-Na coprecipitate. The concentration of CPA dissolved from CPA-DC-Na coprecipitate reached a plateau within 5-10 min, and thereafter gradually decreased, indicating that CPA released from the coprecipitate was recrystallized.

• Journal of Pharmaceutical Investigation
• /
• v.8 no.2
• /
• pp.11-17
• /
• 1978

Phenobarbital의 용출속도(溶出速度)를 증가시키기 위하여 PVP와의 공침물(共沈物)을 형성(形成)한 후 일정(一定)한 표면적(表面積)하에서의 용출속도(溶出速度)를 비교검토(比較檢討)하였다. $37^{\circ}C$, 150r.p.m${\times}$에서의 rate constannt of dissolution, k,는 phenobarbital이 $8.75{\times}10^{-6}M/min$, 1 : 2 phenobarbital-PVP coprecipiate는 $5.35{\times}10^{-5}M/min$이었으며, activation energy of dissolution, Ea는 phenobarbital이 약 10,600cal/mole coprecipitate는 약 5,800cal/mol이었다. 그리고 X-ray diffraction study에 의(依)하면 페노바르비탈 단일물질(單一物質)이나, PVP와의 physical mixture에서는 페노바르비탈의 결정피크를 나타내었으나, PVP와의 공침물(共沈物)의 경우(境遇)에는 페노바르비탈의 결정피크를 인지(認知)할 수 없었다.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.201-209
• /
• 1989

Fine Si-Al-OH coprecipitate powders were prepared from Si- and Al-alkoxides by the hydrolysis method. $\beta$-Sialon powder was obtained from prepared Si-Al-OH coprecipitate by the simultaneous reduction and nitridation method. The syntehsized Sialon powder was pressureless sintered at 175$0^{\circ}C$ for 90 min in N2 atmosphere. The characterization of the Sialon powder was performed with XRD, BET, SEM, TEM and particle size analysis. The sinterability and mechanical properties of sintered bodies were investigated in terms of relative density, M.O.R., fracture toughness, hardness and the morphology of microstructure. The highest values of their mechanical properties were obtained for the $\beta$-Sialon ceramics at Z=1 and those values are as follows : M.O.R., KIC and HV of $\beta$-Sialon ceramics(Z=1) are 499.1 MPa, 5.9MN/m3/2 and 18.7GPa, respectively.

• Proceedings of the PSK Conference
• /
• 2001.10a
• /
• pp.300.1-300.1
• /
• 2001

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.29-38
• /
• 1997

Precipitation was formed during the preparation of decoction from a mixture of Scutellariae Radix and Coptidis Rhizoma. Baicalin and berberine were identified in this coprecipitated product (CPP) and these components were the active ingredients of two herbal medicine. We extracted respectively crude baicalin and berberine in Scutellariae Radix and Coptidis Rhizoma and prepared coprecipitate of crude baicalin-berberine. To increase the stability and bioavailability of coprecipitate of crude baicalin-berberine(CBB), which is slightly soluble drug, its inclusion complex was prepared and studied in this experiment. Inclusion complex of CBB with ${\beta}-cyclodextrin(CBB-{\beta}-CD)$ was prepared by freeze drying method and its characteristics were ascertained by means of solubility test, differential thermal analysis(DTA) and scanning electron microscope(SEM). The type of $CBB-{\beta}-CD$ is classified as $A_L-type$ on phase solubility diagram, and the stoichiometric ratio of CBB(baicalin in CBB) : ${\beta}-CD$ complex is 1:1 and formation constant is 151 $M^-1$. The solubility, dissolution, in situ absorption and serum concentration of $CBB-{\beta}-CD$ were significantly increased when compared to CBB. Therefore enhanced bioavailability of CBB by inclusion complexation with ${\beta}-cyclodextrin$ might be useful for dosage form design of active ingredients of two herbal medicine.

• Journal of Pharmaceutical Investigation
• /
• v.12 no.4
• /
• pp.145-152
• /
• 1982

Data from IR spectroscopy and X-ray diffractometry were used for the characterization of sulpiride polyethylene glycol coprecipitates related with polymorphism of sulpiride. Sulpiride Form II transformed to Form I during coprecipitating with polyethylene glycol and the transformation rate is increased in proportion to molecular size of polyethylene glycol and the content of polyethylene glycol in coprecipitate.

• Journal of the Korean Ceramic Society
• /
• v.29 no.3
• /
• pp.195-201
• /
• 1992

It had been studied the structure and the magnetic properties of singel phase Co2Y(Ba2Co2Fe12O22) powder, one of the hexagonal ferrite. The material was successfully prepared by a commercially applicable coprecipitation method. Adding asqueous solution of BaCl2, CoCl2 and FeCl2(Ba2+:Co2+:Fe2+=1:1:6 in mole ratio) to a mixture of NaOH and hydrogen peroxide solution, coprecipitate was formed with rapid oxidation of ferrous to ferric ion. The coprecipitate transformed to single phase Co2Y powder at heat treatment temperatures as low as 900$^{\circ}C$. The shape of Co2Y particles obtained at 900$^{\circ}C$ was hexagonal plate-like (diameter∼$\mu\textrm{m}$, aspect ratio>10). The structure of the Co2Y was refined by a Rietveld analysis of the measured X-ray diffractogram. The lattice parameters are ao=5.8602${\AA}$ and co=43.512${\AA}$. Co2Y is a soft magnetic material with saturation magnetization 30 emu/g and coecivity 170 . A standard X-ray diffraction pattern for Co2Y is proposed as well.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.541-549
• /
• 1994

The crystallization behavior and structural change of amorphous $PbTiO_{3}$ precursors prepared by coprecipitation method were investigated by XRD, Raman spectra, TEM, and RDF. The precursors were prepared at $45^{\circ}C$ and pH of 9 from a mixed solution of lead nitrate and titanium tetrachloride derived using $H_2O_2$ or $NH_4NO_3$ as an ion stabilizer. The activation energy and temperature for crystallization of the coprecipitate prepared using $NH_4NO_3$ as an ion stabilizer were lower than that derived from the solution containing $H_2O_2$ stabilizer. The amorphous coprecipitate transformed to transient phase and then to crystalline $PbTiO_{3}$. Average interatomic distances of amorphous states decreased with increasing heat-treatment temperature.