• 한국광물학회지
• /
• 제27권4호
• /
• pp.207-222
• /
• 2014

폐-광석으로부터 금속구리분말을 회수하기 위하여 더미 미생물용출, Fe 제거와 전기분해실험을 수행하였다. Cu가 0.034% 함유된 폐-광석시료에 대하여 더미 용출실험을 수행한 결과, Cu 용출률은 박테리아 용출-용액에서 61%, 황산 용출-용액에서 62%로 나타났다. Fe를 효과적으로 제거하기 위하여 더미 용출-용액에 NaOH, $H_2O_2$ 및 $Ca(OH)_2$를 각각 적용한 결과 $H_2O_2$가 가장 효과적인 Fe 제거제로 선정되었다. 전해질 용액을 준비하기 위하여 $H_2O_2$를 더미 용출-용액에 처리한 결과 박테리아 용출-용액에서 Fe가 99%, 황산 용출-용액에서 60%로 제거된 반면에 Cu 제거율은 각각 5%와 7%로 나타났다. 이 용액에 대하여 전기분해 실험을 수행한 결과 Cu 회수율이 박테리아 용출-용액에서 98%, 황산 용출-용액에서 76%로 나타났다. 모수석 형태의 금속구리분말이 양쪽 용출-용액에서 회수되었다.

• 농약과학회지
• /
• 제7권3호
• /
• pp.223-227
• /
• 2003

경기도 수원의 농업과학기술원 시험포장내 비닐하우스에서 오이에 발생하는 병을 조사한 결과 잘록병, 노균병, 흰가루병, 덩굴쪼김병이 발생하였으며, 그 중 오이 노균병이 가장 심하게 발생하였고 피해도 매우 큰 것으로 나타났다. 오이 노균병을 효과적으로 방제하기 위하여 환기팬 설치 효과 및 방제적기 구명을 위한 연구를 수행하였다. 오이노균병 방제를 위하여 비닐하우스의 전면과 후면에 2개의 환기팬을 설치한 다음 하우스 내의 공중습도와 노균병 발생을 조사한 결과, 환기팬무설치하우스에 비해 공중습도가 6.4% 가량 낮아졌으며 노균병 발생을 현저히 억제하는 것으로 나타났다. 환기팬을 설치한 실험구는 환기팬을 설치하지 않고 약제를 3회 처리한 것과 대등한 효과를 보였다. 한편 노균병의 방제적기를 구명하기 위하여 발병 3 일전, 발병직후 및 발병 2일 후부터 각각 3회 디메쏘모르프 염기성염화동수화제를 7일 간격으로 3회 처리한 결과, 발병 3일전부터 예방위주로 약제를 처리하였을 때에는 72.9%의 방제효과를 나타냈으나, 발병직후부터 처리하였을 때에는 61.8%, 발병 2일 후부터 처리하였을 때에는 23.7%의 방제효과를 보여 노균병을 효과적으로 방제하기 위하여는 예방위주의 방제가 필요한 것으로 판단되었다.

• 대한화장품학회지
• /
• 제50권1호
• /
• pp.77-84
• /
• 2024

사용 연령이 만 4 세 이상부터 표시된 어린이 화장품세트 4 건을 온라인으로 구매하였으며 각 구성품 81 건을 대상으로 납, 카드뮴, 비소, 안티몬, 니켈, 코발트, 구리, 크롬 및 수은의 함량을 inductive coupled plasma-mass spectrometry (ICP - MS)로 분석하였다. 어린이 화장품의 중금속 평균값은 납 0.82 ㎍/g, 카드뮴 0.03 ㎍/g, 비소 0.97 ㎍/g, 안티몬 0.52 ㎍/g, 니켈 2.32 ㎍/g, 수은 0.01 ㎍/g으로 모든 제품에서 허용 기준보다 낮았다. 국산과 수입산의 비교 결과, 국산보다는 수입산에서 납, 안티몬, 코발트, 구리의 평균값이 높게 검출되었다(p < 0.05). 화장품 유형에 따른 중금속 평균값은 통계적으로 유의한 차이를 보였는데(p < 0.05) 아이새도에서 비소 2.47 ㎍/g, 니켈 6.36 ㎍/g, 크롬 11.06 ㎍/g으로 평균값이 가장 높게 나왔으며, 볼연지에서 납 1.20 ㎍/g, 안티몬 1.17 ㎍/g, 구리 23.60 ㎍/g으로 가장 높게 나왔다. 분석된 81 건의 어린이 화장품에 대한 코발트의 검출 수준은 불검출 ~ 5.23 ㎍/g, 구리는 불검출 ~ 379.61 ㎍/g, 크롬은 불검출 ~ 36.95 ㎍/g이었다. 브라운 색상의 화장품은 니켈과 코발트에서 평균값이 높게 검출되었으며, 퍼플 색상은 납과 크롬에서 높게 검출되었다.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1420-1425
• /
• 2012

Nowadays, Interior permanent magnet synchronous motor(IPMSM) which having high power density is much used for the vehicles. However, IPMSM causes a lot of losses because of high-speed driving and high current density, and temperature rising by iron loss and copper loss could reduce torque characteristics and durability of IPMSM. Therefore, analysis about thermal characteristics of IPMSM is required at design stage. In this paper, temperature characteristics according to current vector control method were analyzed through calculate thermal equivalent circuit. And calculated results were verified through comparing with the experiments.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.580-584
• /
• 2012

The insulating oils perform a cooling and insulation action in electric power transformer. The mineral oil has immanent fire dangerousness and environmental contamination problem. Vegetable insulating oil has higher ignition point, flash point and more excellent biodegradability than conventional mineral oil. In a real oil-filled transformers, some of the power is dissipated in the form of heat. And transformer require the heat to be removed from the winding and insulator by forced convection of the insulating oil. The flow electrification occurs when insulating oil was forced to be circulated. In this paper, influence of temperature, velocity of flow, and insulating pipe and diameter on streaming electrification of vegetable insulating oil was investigated using forced circulation apparatus. Temperature effects were most significant, and it showed a peak in the temperature $30^{\circ}C$ to $35^{\circ}C$ at insulating and copper pipe. The change of flow electrification according to area variety could be checked by change of diameter.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.220-224
• /
• 2012

The analysis on the bus bar effect is conducted to develop a cost effective 24kV/2,000A switchgear. The temperature enclosures and bus bars could rise due to several heat sources such as eddy current losses and copper losses. Therefore, a study on the characteristics of the electric field intensity and electromagnetic loss according to the bus bar size in a bus bar compartment is essential to design a electrically reliable high voltage switchgear. It is investigated that the electromagnetic influence to the temperature rising and the dielectric stability according to various bus bar sizes by using finite element method(FEM). The electric field intensity and electromagnetic loss according to various bus bar sizes are calculated to design a reliable and a high voltage switchgear. As results, it is found that the electromagnetic loss and the dielectric stability of bus bar could be determined by a bus bar size. It means that a cost effective 24kV/2,000A high voltage switchgear could be developed by selecting the proper size of a bus bar. Also, it is recognized that the electromagnetic characteristics according to various bus bar sizes in order to design an electrically stable high voltage switchgear when the enclosure size is determined as a fixed value. Futhermore, studies on the various nominal voltage class and bus bar sizes will be conducted to develop a cost effective high voltage switchgear.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.56-61
• /
• 2010

Recently, UV pulse laser is widely used in micro machining of the research, development and industry field of IT, NT and BT products because the laser short wavelength provides not only micro drilling, micro cutting and micro grooving which has a very fine line width, but also high absorption coefficient which allows a lot of type of materials to be machined more easily. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, the commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computitional simulation of the UV laser micro machining behavior for thin copper material in this paper. A finite element model considering high strain rate effect is especially suggested to investigate the micro phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. From these computational results, some of dynamic deformation behaviors such as dent deformation shapes, strains and stresses distributions were observed and compared with previous experimental works. These will help us to understand micro interaction between UV laser beam and material.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E2호
• /
• pp.51-61
• /
• 2003

The material exposure tests have been carried out since 1993 to evaluate the relationship between air pollution and material corrosion with the cooperation of the researchers in Japan, China, and Korea. The test pieces such as bronze, copper, marble, and carbon steel have been exposed under both unsheltered and rain-sheltered outdoor condition separately at 18 sampling sites in East Asia. At the same time, the concentration of SO$_2$ and NO$_2$ has been measured simultaneously with passive sampler. The meteorological data were collected from the AWS (Auto-mated weather station) In each country and chemical compositions of wet deposition were also analyzed by the bulk sampling of rainfall every month. As the results, it was found that the corrosion rates of test pieces in the ambient air were appeared to be in the order of carbon steel > marble > bronze copper. The corrosion rates of test pieces in the unsheltered outdoor condition were 2.34 to 5.88 times larger than those in rain-sheltered condition. It was also found that the corrosion rate in the heavy polluted area in China was the highest, and the corrosion rates of the metal pieces were generally proportional to SO$_2$ concentration. Between two sites in Korea, the test pieces at Daegu site showed higher corrosion rates that would be due to the higher SO$_2$ concentration.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.56-61
• /
• 2011

In this study, a series of fatigue tests was conducted to evaluate fatigue strength for the root gap difference with high strength steel with butt welded joints. A finite element analysis using effective notch stress method was also performed to compare effective notch factors each other with butt welded specimens made by copper backing. The results of fatigue tests were classified according to the root gap difference. Fatigue life of butt welded specimens is presented for determining the root gap of high strength steel with butt welded joints in terms of fatigue strength. Then effective notch stress was applied to interpret fatigue strength of butt welded specimen model which is reflected actual measured dimensions. As a result, fatigue strength of high strength steel with butt welded specimens is increased by root gap gets longer in length.

• 대한설비공학회지:설비저널
• /
• 제13권4호
• /
• pp.223-229
• /
• 1984

Experiments were performed for freezing of an initially superheated or nonsuperheated liquid phase in a cooled vertical tube. The liquid was placed in a copper tube whose surface maintained a uniform temperature during the data run and the freezing occurred in a copper tube. The phase change medium was n-odtadecane, a paraffin which freezes at about $61^{\circ}C$. Measurements were made which yielded information about the time dependence of the freezing front, of the amount of frozen mass, and of the various energy components extracted from the tube. The time-wise decay of the initial liquid superheat was also measured. Initial superheat of the liquid tends to moderately diminish the rozen mass and associated latent energy extraction at small times but has lit tie effect on these quantities at large tiems. Natural convection in the liquid Plays a modest role only at small times and disappears when the superheat decay to zero. Although the latent energy constitutes the largest contributor to the total extracted energy, the sensible energy components can make a significant contribution, especially at large tube wall subcoolings, large initial liquid superheating and short freezing time.