• Bulletin of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.422-427
• /
• 1995

In a stream of water sample, trace metal ions are quantitatively coprecipitated with Indium hydroxide and filtered. The filtered precipitate is continuously dissolved in 3 M nitric acid and introduced to ICP directly. The lead, cadmium, and copper are concentrated more than 10-fold and determined with ICP-AES at a sampling frequency of 10/hour. The detection limits are 2.89, 1.43,0.52 ppb for lead, cadmium, and copper respectively. Recoveries of lead, cadmium, and copper are 98.7, 94.3, and 104.5% respectively. The RSD values for three elements are about 3-5% currently.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.1
• /
• pp.31-36
• /
• 2009

The exposure of human beings to toxic trace metals (Cu, Zn) continues to be an important public health issue and concern. This study was conducted to assess the exposure to trace metals (Cu, Zn) in the general Korean population by inductively coupled plasma mass spectrometry (ICP-MS) and Atomic absorption spectrometry (AAS). Serum samples were obtained from 40 healthy volunteers. Specimens were collected in special container and we applied sample processing to minimize contamination. We used ICP-MS and AAS to analyze simultaneously the concentration of metals including copper, zinc. Distribution of trace metal levels in the general healthy population showed lower values. The results in this study can provide background data for clinical studies associated with trace metal exposure in the korean population.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.801-809
• /
• 2013

We investigate sensitivity and limit of detection (LOD) of trace copper (Cu) metal using pristine carbon nanotube (CNT) and acidified CNT (ACNT) electrodes. Squarewave based anodic stripping voltammetry (SWASV) is used to determine the stripped Cu concentration. Prior to performing the SWASV measurements, its optimal conditions are determined and with that, effects of potential scan rate and $Cu^{2+}$ concentration on stripping current are evaluated. The measurements indicate that (1) ACNT electrode shows better results than CNT electrode and (2) stripping is controlled by surface reaction. In the given $Cu^{2+}$ concentration range of 25-150 ppb, peak stripping current has linearity with $Cu^{2+}$ concentration. Quantitatively, sensitivity and LOD of Cu in ACNT electrode are 9.36 ${\mu}A\;{\mu}M^{-1}$ and 3 ppb, while their values are 3.99 ${\mu}A\;{\mu}M^{-1}$ and 3 ppb with CNT electrode. We evaluate the effect of three different water solutions (deionized water, tap water and river water) on stripping current and the confirm types of water don't affect the sensitivity of Cu. It turns out by optical inspection and cyclic voltammetry that superiority of ACNT electrode to CNT electrode is attributed to exfoliation of CNT bundles and improved interfacial adhesion occurring during oxidation of CNTs.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1112-1118
• /
• 1994

Epoxidation of olefins has been studied using iodosylbenzene (PhIO) as the terminal oxidant and binuclear and mononuclear complexes of $Mn^{2+}$, $Co^{2+}$, and $Cu^{2+}$ as catalysts. Epoxides were the predominant products with trace amounts of allylic oxidation products, and the metal complexes were found to be effective catalysts in the epoxidation reactions. The reactivity of binuclear copper complexes was greater than that of the mononuclear copper complexes, whereas the binuclear and mononuclear complexes of $Mn^{2+}$ and $Co^{2+}$ showed similar reactivities. The nature of the ligands bound to copper did not influence the reactivity of the binuclear copper complexes so long as copper ions were held in close proximity. A metal-iodosylbenzene complex, such as suggested previously for Lewis acidic metal complex-catalyzed epoxidation by iodosylbenzene, is proposed as the active epoxidizing species. Some mechanistic aspects are discussed as well.

• Toxicological Research
• /
• v.29 no.3
• /
• pp.211-215
• /
• 2013

The trace toxic metal copper was assayed using mercury immobilized on a carbon nanotube electrode (MCW), with a graphite counter and a reference electrode. In this study, a macro-scale convection motor was interfaced with a MCW three-electrode system, in which a handmade MCW was optimized using cyclic- and square-wave stripping voltammetry. An analytical electrolyte for tap water was used instead of an expensive acid or base ionic solution. Under these conditions, optimum parameters were 0.09 V amplitude, 40 Hz frequency, 0.01 V incremental potential, and a 60-s accumulation time. A diagnostic working curve was obtained from 50.0 to 350 ${\mu}g/L$. At a constant Cu(II) concentration of 10.0 ${\mu}g/L$, the statistical relative standard deviation was 1.78% (RSD, n = 15), the analytical accumulation time was only 60 s, and the analytical detection limit approached 4.6 ${\mu}g/L$ (signal/noise = 3). The results were applied to non-treated drinking water. The content of the analyzed copper using 9.0 and 4.0 ${\mu}g/L$ standards were 8.68 ${\mu}g/L$ and 3.96 ${\mu}g/L$; statistical values $R^2$ = 0.9987 and $R^2$ = 0.9534, respectively. This method is applicable to biological diagnostics or food surveys.

• Journal of Food Hygiene and Safety
• /
• v.9 no.1
• /
• pp.49-56
• /
• 1994

This study was carried out to investigate the levels of copper, zinc, manganese, nickel, cadmium and mercury content in breast milk among urban, rural and industrial lactating women in Korea. A total of 59 samples, which were collected from 17 in urban, 20 in rural and 22 in industrial area, and from 21-38 years-old healthy lactating women, were analyzed by Rigaku Mercury Analyzer for mercury, and by atomic absorption apectrophotometry for the other metals. The results are summarized as follows : The mean trace metal contents in breast milk were determined to be 0.34$\pm$0.14 ppm for copper, 2.01$\pm$1.43 ppm for zinc, 8.49$\pm$5.11 ppb for manganese, 7.75$\pm$5.73 ppb for nickel, 1.65$\pm$2.42 ppm for cadmium, 34.45$\pm$26.71 ppb for lead and 0.90$\pm$0.68 ppb for mercury. For the trace metal content in breast milk by area, the highest of copper, zinc, cadmium and mercury content were in urban, the highest of manganese content was in industrial, and the highest of nickel and lesd content were in rural. For copper, zinc, manganese and lead content in breast milk by lactation period, the highest levels were found in under 4 weeks after lactating, and subsequently the levels declined as lactation progressed, but the levels of zinc and manganese content increased from over 25 weeks after lactating. For cadmium and mercury content in breast milk by lactation period, the lowest levels were found in under 4 weeks after lactating, the highest levels were found in 5-12 weeks after lactating, and subsequently the levels declined as lactation progressed.For nickel content in breast milk by lactation period, the highest level was in 13-24 weeks after lactating, the lowest level was in 5-12 weeks after lactating.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.130-135
• /
• 2016

To alloy high melting point elements such as boron, ruthenium, and iridium with copper, heat treatment was performed using metal oxides of $B_2O_3$, $RuO_2$, and $IrO_2$ at the temperature of $1200^{\circ}C$ in vacuum for 30 minutes. The microstructure analysis of the alloyed sample was confirmed using an optical microscope and FE-SEM. Hardness and trace element analyses were performed using Vickers hardness and WD-XRF, respectively. Diffusion profile analysis was performed using D-SIMS. From the microstructure analysis results, crystal grains were found to have formed with sizes of 2.97 mm. For the copper alloys formed using metal oxides of $B_2O_3$, $RuO_2$, and $IrO_2$ the sizes of the crystal grains were 1.24, 1.77, and 2.23 mm, respectively, while these sizes were smaller than pure copper. From the Vickers hardness results, the hardness of the Ir-copper alloy was found to have increased by a maximum of 2.2 times compared to pure copper. From the trace element analysis, the copper alloy was fabricated with the expected composition. From the diffusion profile analysis results, it can be seen that 0.059 wt%, 0.030 wt%, and 0.114 wt% of B, Ru, and Ir, respectively, were alloyed in the copper, and it led to change the hardness. Therefore, we verified that alloying of high melting point elements is possible at the low temperature of $1200^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1118-1121
• /
• 1994

Reactions of alkaline metal carbonates with sulfur are investigated in detail. The evolution of CO and a trace of $SO_2$ were observed in the course of reaction with major component of polysulfides. Some evidences that the reaction proceeds with breaking of terminal sulfur-sulfur bond in the sulfur polymer, and forming CO, $SO_2$ and polysulfide are presented. Polysulfides have the role of keeping free sulfur and allow it to react with other chemicals to rather high temperatures.plexes, whereas the binuclear and mononuclear complexes of Mn$^{2+}$ and Co$^{2+}$

• Radiation Oncology Journal
• /
• v.33 no.2
• /
• pp.66-74
• /
• 2015

Trace elements play crucial role in the maintenance of genome stability in the cells. Many endogenous defense enzymes are containing trace elements such as superoxide dismutase and metalloproteins. These enzymes are contributing in the detoxification of reactive oxidative species (ROS) induced by ionizing radiation in the cells. Zinc, copper, manganese, and selenium are main trace elements that have protective roles against radiation-induced DNA damages. Trace elements in the free salt forms have protective effect against cell toxicity induced by oxidative stress, metal-complex are more active in the attenuation of ROS particularly through superoxide dismutase mimetic activity. Manganese-complexes in protection of normal cell against radiation without any protective effect on cancer cells are more interesting compounds in this topic. The aim of this paper to review the role of trace elements in protection cells against genotoxicity and side effects induced by ionizing radiation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4249-4253
• /
• 2012

While associations between trace elements and heavy metals with prostate cancer are still debatable, they have been considered as risk factors for prostate cancer. Thus, this study aimed to detect any links between selected minerals and heavy metals including Se, Zn, Cu, Mn and Fe with prostate cancer. A case control study was carried out among 100 subjects (case n=50, control n=50), matched for age and ethnicity. Trace elements and heavy metals level in hair and nail samples were determined by ICP-MS. Mean selenium levels in hair and nail of the cases were significantly lower as compared to controls. A similar trend was noted for zinc in both hair and nail samples, whereas the mean level of copper was significantly higher in cases than controls. Similar elevation was noted for iron and manganese (p<0.05 for all parameters). Low levels of selenium and zinc and high levels of copper, iron and manganese appear to be associated with the risk of prostate cancer. Further studies to elucidate the causal mechanisms and appropriate chemopreventive measures are needed.