• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.1014-1019
• /
• 2012

This study was conducted to evaluate the heavy metal contents of mudflat solar salt, salt water, and sea water produced in the nationwide salt pan. In mudflat solar salt, moisture contents were significantly different (p<0.001) between regions, ranging from 7.357% to 14.862%. Arsenic (As) content ranged from 0.007 ppm to 0.497 ppm, cadmium (Cd) from 0.000 ppm to 0.101 ppm, plumbum (Pb) from 0.000 ppm to 0.191 ppm, hydrargyrum (Hg) from 0.006 ppb to 0.180 ppb, and copper (Cu) from 0.039 ppm to 4.794 ppm between regions, which were significantly different (p<0.001). Further, As, Cd, Pb, and Hg contents of sea and salt water were not in excess of their criterion points. Our results suggest that heavy metal contents of mudflat solar salt, salt water, and sea water produced in the nationwide salt pan were at safe levels. However, continuous management of heavy metal contamination, such as PVC met, is still necessary.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.475-483
• /
• 2019

Special chemical warfare agents are lethal gases that attack the human respiratory system. One of such gases are blood agents that react with the irons present in the electron transfer system of the human body. This reaction stops internal respiration and eventually causes death. The molecular sizes of these agents are smaller than the pores of an activated carbon, making chemical adsorption the only alternative method for removing them. In this study, we carried out a Computational Fluid Dynamics simulation by passing a blood agent: cyanogen chloride gas through an SG-1 gas mask canister developed by SG Safety Corporation. The adsorption bed consisted of a Silver-Zinc-Molybdenum-Triethylenediamine activated carbon impregnated with copper, silver, zinc and molybdenum ions. The kinetic analysis of the chemical adsorption was performed in accordance with the test procedure for the gas mask canister and was validated by the kinetic data obtained from experimental results. We predicted the dynamic behaviors of the main variables such as the pressure drop inside the canister and the amount of gas adsorbed by chemisorption. By using a granular packed bed instead of the Ergun equation that is used to model porous materials in Computational Fluid Dynamics, applicable results of the activated carbon were obtained. Dynamic simulations and flow analyses of the chemical adsorption with varying gas flow rates were also executed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.94-102
• /
• 1981

To investigate the characteristics of anodic film formed on metals and the reactivities of organic inhibitor Di-iso-butylnitrosoamine (DBNA) in sea water. the cathodic reactions of anodic film formed on metals were carried out by using the potential drop method and galvanostatic method at $25^{\circ}C$. The investigated results are as follows: The anodic films formed on aluminum and zinc in 60mM $DBNA+9\%_{\circ}$ sea water did not show-changes of potential drop. However, those formed on lead and copper were reasonable electrodes. It was concluded that cathodic reactivities of proton through the anodic film in aqueous solution were constant without regard to the kinds of metals used with anodic film electrode at operated current density ranges, because the values of transition time obtained in 0.5M sodium chloride solution and $9\%_{\circ}$ sea water nearly coincided. The values of transition time of the first step by the galvanostatic method were obtained from 0.22 to 1.40 sec ranges far less than one minute. Therefore, it suggested that cathodic reactions of proton through the anodic film were mainly controlled by diffusion/adsorption process. The differences of between $\tau_{1}/4$ in $9\%_{\circ}$ sea water and $\tau_{1}/4$ in 60mM $DBNA+9\%_{\circ}$ sea water, and between $E_{1}/4$ in sea water and $E_{1}/4$ in 60mM $DBNA+9\%_{\circ}$ sea water at the constant current density with $1.9\times10^{-4}\sim5.0{\times}10^{-6}\;amp/cm^2$ were 0.06 sec and 0.53 v. respectively and cathodic reactions of DBNA on the anodic film electrodes were chiefly controlled by adsorption/diffusion process. The reason that adsorption quantities of proton on anodic film formed on aluminum and zinc in aqueous solutions were much more than those on lead and copper, seems to lie due mostly to the number of porosity produced on anodic film used.

• Journal of Korean Society of Forest Science
• /
• v.67 no.1
• /
• pp.42-49
• /
• 1984

The elderberry was known to the ancients for its medicinal properties, and in Europe the inner back was formerly administered as a cathartic. The flowers contain a voletile oil, and serve for the distilation of elder-lower water, used in confectionery, perfumes and lotions. The leaves are employed to impart a green colour to fat and oil, and the leaves and bark emit a sickly odour, believed to be repugnant to insect. With its unique flavor and natural food colour, commercial processing companies used the fruit mainly in the making for jam, jelly, pies, juice, and wines. Its vitamin-C content is reported by Andross (1941) as 25-30mg/100g. Harvesting and processing have been mechanized to some extent. However, the cotains with nutritional value has not been reported yet. In the present study the various contains with nutritional value in the fresh elderberry juice is reported by the quantitative analysis. In this study results obtained can be summarized as follows. 1) The fresh elderberry juice contained following mineral elements; calcium 0.012%, magnesium 0.023%, potassium 0.10%, sodium 0.0019%, iron 0.0009%, cobalt 0.0002%, zinc 0.0004%, copper 0.0001%, phosphorus 0.036%, manganese 0.0006%, iodide $1{\mu}g/g$. 2) Five kinds of vitamines were also found ; vitamin-$B_1$ $0.1{\mu}g/g$, vitamin-$B_2$ $0.5{\mu}g/g$, vitamin-C 0.3mg/g, niacin $14{\mu}g/g$, choline chloride 0.3mg/g. 3) Fresh elderberry juice also contains crude protein 1.10%, fat 0.26%, carbohydrate 6.9%, pectin 0.76%, tannin 0.89%, ash 0.80%, water 90.9% and 34.3 cal/100g. 4) The absorption spectrum of the purplishblack color of fresh elderberry juice has a peak between 523-530mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.538-544
• /
• 1985

This study was carried cut to evaluate the water quality of spring waters in Pusan area(see Fig. 1). In this experiment, twenty-five water samples were collected from 5 stations from December 1983 to August 1984. Range and mean values of constituents of the samples are as follows: pH $5.80{\sim}7.25$, 6.60; water temperature $6.0{\sim}23.0^{\circ}C,\;12.9^{\circ}C$; total residue $33.0{\sim}325mg/l$, 121.2mg/l; alkalinity $4.75{\sim}51.6mg/l$, 24.1mg/l; hardness $9.47{\sim}85.0mg/l$, 30.3mg/l; electrical conductivity $0.495{\sim}2.750{\times}^2{mu}{\mho}/cm,\;1.239{\times}10^2{\mu}{\mho}/cm$;turbidity $0.54{\sim}7.80$NTU, 2.04NTU; $KMnO_4$ consumed $0.51{\sim}8.47mg/l$, 1.96mg/l; chloride ion $4.91{\sim}36.0mg/l$, 12.55mg/l; fluoride ion ND-0.30ppm, 0.08ppm; nitrate-nitrogen ND-8.94mg/l, 1.94m:g/l; nitrite-nirogen ND-0.10mg/l, 0.03mg/l; ammonia-nitrogen ND-0.16mg/l, 0.03mg/l: phosphate-phosphorus ND-0.09mg/l, 0.03mg/l; silicate-silicious $0.42{\sim}22.7ng/l$, 7.96mg/l; copper ND-10.5ppb, 2.46ppb; lead ND-22.7ppb, 3.54ppb; zinc ND-103ppb, 21.33ppb; iron $20.3{\sim}2,800ppb$, 801.72ppb, respectively. Arsenic, cyan, cadmium, manganese, mercury, chrome and phenol were not detected. Total residue, electrical conductivity, turbidity and chloride ion of station 1 (Milrakdong) were higher than others as 178.1mg/l, $2.127{\times}10^2{\mu}{\mho}/cm$, 3.16NTU and 16.32mg/l. The concentration of silicious had a great influence on precipitation. The concentration of fluoride ion of spring waters was lower as 0.08ppm than the criterion for drinking water as 1ppm, while iron was exceed 2.7 times as 801.72ppb.

• Journal of Food Hygiene and Safety
• /
• v.15 no.4
• /
• pp.328-333
• /
• 2000

This study was carried out to changes in chemical and microbiological properties of spring waters in Tongyeoung area. In this paper, ninety spring water samples were collected from 9 station for 11 month to evaluated chemical and bacteriological water quality. Range and mean values of constituents of the samples are as followed; water temperature 5.2~25.8$^{\circ}C$, 16.3$^{\circ}C$, pH 6.0~7.2, 6.7, total residue 33.6~210 mg/1, 90.6 mg/1, turbidity 0.35~5.48, 1.45NTU, KMnO4 consumed 0.51~4.21 mg/1, 1.39 mg/1, chloride ion 6.23~42.5, 16.7 mg/l, phosphate-phosphorus ND-0.04, 0.02 mg/1, nitrite-nitrogen ND~0.02, 0.01 mg/1, nitrate-nitrogen ND~3.56, 1.42 mg/1, ammonia-nitrogen ND~0.20, 0.14 mg/1, dissolved total nitrogen ND~3.78, 1.57 mg/1, iron 0.04~0.28, 0.13ppm, zinc 0.03~0.66, 0.20ppm, mangan ND~0.01, allumium 0.14~0.58, 0.39ppm, copper ND~0.01, 0.01, lead ND~0.01, 0.01ppm, Arsenic ND~0.01, 0.01ppm, mercury ND~0.02, chrome not detected, cadmium not detetced respectively. The viable cell counts of the spring waters ranged 5.0~760/m1(means 130/m1). Range and mean value of total coliform and focal coliform MPN's of the spring waters were 0~2,400MPN/100 ml, 73MPN/100 ml and 0~540MPN/100 ml, 21MPN/100 ml. Spring water quality was usually poor with viable cell counts exceeding 130 CFU/liter and the coliform counts in spring waters of 73 MPN/liter. Composition of coliform by IMViC reaction was 33.3% E. coli, 15.6% Citrobacter freundii, 35.6% Klebsiella aerogenes and others.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.90-100
• /
• 1975

The estimation of the pre-processing condition of oyster is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of oyster, which is the most important shellfish for domestic use and export. The data were analysed by measuring the condition index, chemical composition and heavy metal content of oysters. In order to eliminate the manual work that has to be done on a tightly closed oyster shell and avoid shrinkage in the oyster meat which is attendant on the steaming process, chemical means to open oyster were examined. finding the method of pretreatment of polyphosphate for frozen oysters were attempted to improve the product quality. The prevention of undesirable color change of the canned oyster meat is another problem to solve. The important results are as follows : 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful as an index to measure the condition index of oysters. 2. As a whole, monthly changes of moisture and fat content in oysters were reversely correlated. Protein content slightly decreased from April and rapidly decreased in July, and again rapidly increased in August but from September to November decreased slightly. In April, the content of glycogen was 4 percent. From this period to September, glycogen was rapidly decreased. From July to September, it was only 0. 7 to 1 percent but increased from October. There were little seasonal changes in pH value. The pH value of oyster meat was 6.0 to 6.2. The crude ash content was slightly decreased from June to August. 3. The range of monthly change of heavy metal content are as follows: Total mercury was 0 to 0.019 ppm, cadmium was 0.026 to 0.053 ppm, copper was 0.111 to 0.594 ppm, and lead_was 0.061 to 0.581 ppm. 4. By the results of condition index, chemical composition and heavy metal content of oysters, the suitable harvest season as raw materials for processing was the end of December to the end of May of next year. 5. The pretreatment of 10 percent polyphosphate in 5 percent salt solution of oyster meat appeared effective to reduce thawing drip during cold storage. 6. The pretreatment of $Na_2EDTA$ and BHA did not show the color prevention effect to the canned oyster meat during storage. 7. Magnesium chloride affected to open the valves of oysters.

• Clean Technology
• /
• v.26 no.2
• /
• pp.137-144
• /
• 2020

Metal-impregnated activated carbons were prepared via ultrasonic-assisted impregnation method for regeneration and low ammonia concentration. Magnesium and copper were selected as metals, while chloride (Cl^-) and nitrate (NO₃^-) precursors were used to impregnate the surface of activated carbon. The physical and chemical properties of the prepared adsorbents were characterized by TGA, BET, and NH₃-TPD. The ammonia breakthrough test was carried out using a fixed bed and flowing ammonia gas (1000 mg L^-1 NH₃, balanced N₂) at 100 mL min^-1, under conditions of temperature swing adsorption (TSA) and pressure swing adsorption (PSA, 0.3, 0.5, 0.7, 0.9 Mpa). The adsorption and desorption performance of ammonia were in the order of AC-Mg(Cl) > AC-Cu(Cl) > AC-Mg(N) > AC-Cu(N) > AC through NH₃-TPD and TSA and PSA processes. AC-Mg(Cl) using MgCl₂ showed the average adsorption amount of 2.138 mmol/g at TSA process. Also, AC-Mg(Cl) showed the highest initial adsorption amount of 3.848 mmol/g at PSA 0.9 Mpa. When metal impregnated the surface of the activated carbon, it was confirmed that not only physical adsorption, but also chemical adsorption increased, making enhancement in adsorption and desorption performances possible. Also, the prepared adsorbents showed stable adsorption and desorption performances despite repeated processes, confirming their applicability in the TSA and PSA processes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2000

Preferential flow has recently been the subject of increasing interest because these phenomena contribute to solute transport in soils. Commonly, preferential flow paths are associated with macropores or highly structured soils. We presented an analysis of the measured breakthrough curves (BTCs) of $Cl^-$ and $Cu^{2+}$ ions to test the occurrence of preferential flow in soils using miscible displacement technique under steady flow conditions. We also analyzed soil water retention curves and from this curves induced cumulative pore size distribution of undisturbed soils, which sampled from Ap1, B1, and C horizons of Songjeong series soils (the fine loamy, mesic family of Typic Hapludults). In this study, miscible displacement experiment on C horizon was excluded, because it is structureless sandy loam with saturated hydraulic conductivity of $5.2cmhr^{-1}$. The saturated hydraulic conductivity of Ap1 horizon was $2.0cmhr^{-1}$, which was about 7 times higher than that of B1 horizon ($0.27cm hr^{-1}$). Cumulative pore size distribution predicted that Ap1 horizon had more macropores (pore diameter larger than $49{\mu}m$, equivalent to -6 kpa of soil matric potential) than B1 horizon. The hydrodynamic dispersion coefficient from chloride BTCs was estimated as $1.3cm^2hr^{-1}$ for B1 and $34cm^2hr^{-1}$ for Ap1 horizon. However the retardation factors of B1 and Ap1 horizon were significantly different, i.e. 1 and 0.6, respectively, which means that there was distinct partition between mobile water and immobile phase in Ap1 horizon. The copper retardation effect of Ap1 horizon was less than that of B1 horizon, even though cation exchange capacity of Ap1 horizon was higher than that of B1 horizon. Thus, breakthrough curves of $Cl^-$ and $Cu^{2+}$ obviously showed the probability that preferential flow would occur in Ap1 horizon.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.122-147
• /
• 2012

The Four-guardian statues in Song-gwang buddhist temple, Suncheon, Korea, have been remade in AD 1628 and have been repaired and repainted over several times since then. Therefore, the study of the pigments applied on the statues can provide good chance for investigation about pigments used in the late Chosun Period. Pigments on fragments from Gwang-mok(Virupaksha), one of the Four-guardian statues, have been analyzed by optical microscope, SEM-EDX and XRD in order to identify the components and compounds. Six types of materials were found from the fragments, which are soil layer with brown clay band, soil layer containing a lot of fibers, Korean paper with loose texture, Korean paper with dense texture, silk, and hemp textile. Presumably, the soil layer which have brown clay band is basis layer and the other layers are repaired layers. From comparative study for the components of the pigments, applied on upper and lower parts of the repaired layers, we have concluded that those repaired layers had been applied on the statue by the following order; basis layer ${\rightarrow}$ Korean paper with loose texture ${\rightarrow}$ soil containing a lot of fibers ${\rightarrow}$ silk ${\rightarrow}$ hemp textile and Korean paper with dense texture. In addition, the years that those materials were applied on the statue have been estimated as 1720~1891, 1926, 1946 and 1976, respectively. The distinct features of each age are as the following; lead white and copper chloride hydroxide are major white and green pigments before 1891, zinc white, barium white, emerald green, and ultramarine blue appear after 1926 and titanium white uprises around 1976. Our result presented here, study on pigments applied on traditional statues over several different periods, will provide good database for future study on pigments used for traditional painting in Buddist temples and Dancheong.