• 제목/요약/키워드: Copper (II) chloride

검색결과 48건 처리시간 0.03초

The Effect of Alum and Metals on Paper Aging

  • Choi, Kyoung-Hwa;Yoon, Byung-Ho;Lee, Myoung-Ku
    • 펄프종이기술
    • /
    • 제40권5호
    • /
    • pp.42-46
    • /
    • 2008
  • The papers in preserved books and archives experience aging which was affected by a variety of factors. Thus, the studies concerning impacts of those factors on paper aging are required. In this research, a simulation of a short-time accelerated paper aging was conducted in order to examine the effects of acid and metals (alum, copper (II) sulfate, copper (II) chloride, and iron (III) chloride) on the natural paper aging for a long time. As a result of experiments, it is found that both acid and metals have impacts on paper aging. Alum resulted in the significant decrease of pH, brightness, folding endurance, and viscosity of paper. Both copper (II) chloride and iron (III) chloride also resulted in the decrease of brightness, folding endurance, and viscosity of paper. In more detail, paper aging by iron (III) chloride showed much more significant than that by copper (II) chloride. The paper aging in case of copper (II) sulfate coexisting sulfate ion, where metal absorbed moisture was higher than in case of paper treated only by alum. This result indicated that metal catalyzes paper aging by acid. Based on these results, it was revealed that both alum and metal are the major factors in paper aging. In particular, paper aging was far more accelerated in case when acid and metals existed in paper at the same time.

Non-sintering Preparation of Copper (II) Oxide Powder for Electroplating via 2-step Chemical Reaction

  • Lee, Seung Bum;Jung, Rae Yoon;Kim, Sunhoe
    • Journal of Electrochemical Science and Technology
    • /
    • 제8권2호
    • /
    • pp.146-154
    • /
    • 2017
  • In this study, copper (II) oxide was prepared for use in a copper electroplating solution. Copper chloride powder and copper (II) oxide are widely used as raw materials for electroplating. Copper (II) oxide was synthesized in this study using a two-step chemical reaction. Herein, we developed a method for the preparation of copper (II) oxide without the use of sintering. In the first step, copper carbonate was prepared without sintering, and then copper (II) oxide was synthesized without sintering using sodium hydroxide. The optimum amount of sodium hydroxide used for this process was 120 g and the optimum reaction temperature was $120^{\circ}C$ regardless of the starting material.

Structural and Magnetic Properties of Monomeric and Dimeric Copper(II) Complexes with Phenyl-N-[(pyridine-2-yl)methylene]methaneamide

  • Lee, Hong-Woo;Sengottuvelan, Nallathambi;Seo, Hoe-Joo;Choi, Jae-Soo;Kang, Sung-Kwon;Kim, Young-Inn
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권9호
    • /
    • pp.1711-1716
    • /
    • 2008
  • The reaction of copper(II) chloride with phenyl-N-[(pyridine-2-yl)methylene]methaneamide (ppmma) leads to a new $\mu$ -chloro bridged dimeric [Cu(ppmma)$Cl_2$]$_2$ complex, whereas a reaction of copper(II) bromide with ppmma affords a monomeric Cu(ppmma)$Br_2$ complex. Both complexes have been characterized by X-ray crystallography and electronic absorption spectroscopy. The crystal structural analysis of [Cu(ppmma)$Cl_2$]$_2$ shows that the two Cu(II) atoms are bridged by two chloride ligands, forming a dimeric copper(II) complex and the copper ion has a distorted square-pyramidal geometry ($\tau$ = 0.2). The dimer units are held through a strong intermolecular $\pi-\pi$ interactions between the nearest benzyl rings. On the other hand, Cu(ppmma)Br2 displayed a distorted square planar geometry with two types of strong intermolecular π-π interaction. EPR spectrum of [Cu(ppmma)$Cl_2$]$_2$ in frozen glas s at 77 K revealed an equilibrium between the mononuclear and binuclear species. The magnetic susceptibilities data of [Cu(ppmma)$Cl_2$]$_2$ and Cu(ppmma)$Br_2$ follow the Curie-Weiss law. No significant intermolecular magnetic interactions were examined in both complexes, and magnetic exchange interactions are discussed on the basis of the structural features.

염화(鹽貨)구리와 염화철(鹽貨鐵) 혼합용액(混合溶液)의 조성(組成)이 pH와 용액전위(溶液電位)에 미치는 영향(影響) (Effect of Composition on the pH and Solution Potential of Mixed Solutions of Copper and Iron Chloride)

  • 이만승;손성호
    • 자원리싸이클링
    • /
    • 제17권6호
    • /
    • pp.17-23
    • /
    • 2008
  • 염화 제 2철용액에 의한 구리황화광의 침출액을 모사하기 위해 $FeCl_3$-$FeCl_2$-$CuCl_2$-CuCl-NaCl-HCl-$H_2O$의 조성을 지닌 합성용액을 제조하였다. 합성용액에서 염화철과 염화구리의 농도를 0.1에서 1 m까지 변화시키며 성분의 농도변화에 따른 $25^{\circ}C$에서 용액의 pH와 전위의 변화를 측정하였다. 염산의 농도가 일정한 조건에서 CuCl의 농도를 증가시키면 용액의 pH는 증가하였다. 그러나 염산과 CuCl의 농도가 일정한 조건에서 다른 용질의 농도를 증가시키면 수소이온의 활동도계수가 증가하면서 용액의 pH는 감소하였다. CuCl의 농도를 증가시키면 염화 제 1구리이온이 안정해지는 방향으로 반응이 진행하나 $FeCl_3$은 반대의 효과를 나타냈다.

Synthesis and Characterization of Dichloro and Dibromo(2-(dimethylaminomethyl)thiophene) Copper(II) Complexes

  • Kim, Young-Inn;Choi, Sung-Nak;Ro, Chul-Un
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권7호
    • /
    • pp.549-553
    • /
    • 1994
  • The 2-(dimethylaminomethyl)thiophene (dmamt) complexes with copper(II) chloride and bromide were prepared and characterized by optical, EPR, XPS spectroscopies and magnetic susceptibility measurements. The low-energy absorption band above 850 nm and the relatively small EPR hyperfine coupling constant ($A_{//}{\simeq}$125 G) indicate the pseudotetrahedral site symmetry around copper(II) ion both in Cu(dmamt)$Cl_2$ and Cu(dmamt)$Br_2$ complexes. The higher satellite to main peak intensity of Cu $2P_{3/2}$ core electron binding energy in XPS spectra also supports the pseudotetrahedral geometry around the copper(II) ions having $CuNSX_2$ chromophores. The distortion from square-planar to pseudotetrahedral symmetry is likely to arise from the steric hindrance of the bulky dmamt ligand in the complex. Magnetic susceptibility study shows that these compounds follow Curie-Weiss law in the temperature range of 77-300 K with positive Weiss constant exhibiting the ferromagnetic interaction between copper(II) ions in solid state.

Impregnated Active Carbon-Shelf Life Studies and Its Evaluation Against Cyanogen Chloride with and without Canister

  • Singh, Beer;Saxena, Amit;Srivastava, Avanish Kumar;Dubey, Devendra Kumar;Gupta, Arvind Kumar
    • Carbon letters
    • /
    • 제8권4호
    • /
    • pp.280-284
    • /
    • 2007
  • Samples of active carbon of $1150\;m^2/g$ surface area were impregnated with ammoniacal salts of copper, chromium and silver, with and without triethylenediamine. The samples of impregnated carbon were aged at $50^{\circ}C$, with and without 90% RH (relative humidity), for a little more than one year and chemically evaluated periodically. Initially copper (II) and chromium (VI) reduced very fast in the samples in humid atmosphere to the extent of 30% and 60% respectively in four months. These values were found to be unaffected by the presence of triethylenediamine (TEDA) indicating that the chemical did not retard the reduction process of chromium (VI) and copper (II). However, in the absence of humidity the reduction of the impregnants was significantly less (10-12%, w/w) in four months. It was quite evident; therefore, that the moisture was mainly responsible for the reduction of chromium (VI) and copper (II) species in impregnated carbons. The prolonged ageing of the samples with and without triethylenediamme after four months with and without humid atmosphere showed that the extent of reduction of chromium (VI) was very low, i.e. 5-10% and of copper (II) was 2-25%. Silver is not reduced due to carbon, as it remained unchanged in concentration on storage. The impregnated carbon samples (100 g) without triethylenediamine, which were aged at room temperature for 5 years in absence of humidity and unaged when evaluated against cyanogen chloride (CNCl) at a concentration of 4 mg/L and airflow rate of 30 lpm showed a high degree of protection (80- 110 minutes).

유가수온($CH_{3}$ HgCl) 투여시 흰쥐의 각 장기별 중금속 (유기수온, 총수은, 아연, 구리) 분포 (Organ Distribution of Total mercury, Organicmercury, Zinc and Copper in Methylmercury-Administered Rats)

  • 이진헌;김영규;정문호
    • 한국환경보건학회지
    • /
    • 제17권2호
    • /
    • pp.127-139
    • /
    • 1991
  • Four group(Control I II, Treatment I II ) of Rats, each consisting of 10 rats, were studied Methylmercury Chloride MMc was orally given to Sprague-Dawley male at does of 10mg/kg (5 mg/kg $\cdot$ day), 10mg/kg after two weeks. This study was designed to investigate the distribution, the difference and the ratio of organic mercury, total mercury, zinc and copper in tissue, in each others group. The result were as follows: 1. There was no significantly difference in the body weight between two groups( p > 0.05). 2. There was significantly difference in the distribution of zinc concentration in liver, kidndey, blood, spleen between control I and treatment I, and in blood, spleen between control II and treatment II (P < 0.05). 3. There was significantly difference in the distribution of copper concentration in kidney, blood between control I and treatment I, and in spleen brain between control II and treatment II. 4. The ratio of zinc concentration in treatment/control was high at spleen. 5. The ratio of methylmercury/totalmercury was high at spleen.

  • PDF

Manufacturing of Copper(II) Oxide Powder for Electroplating from NaClO3 Type Etching Wastes

  • Hong, In Kwon;Lee, Seung Bum;Kim, Sunhoe
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권1호
    • /
    • pp.60-67
    • /
    • 2020
  • In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl2 from NaClO3 type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo3·nCu(OH)2], first reaction product, CuCo3 is produced more than Cu(OH)2 when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)2 was produced more than CuCO3. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

RDE를 이용한 구리이온의 환원속도 및 전착형태에 관한 고찰 (A Study on the Kinetics of Copper Ions Reduction and Deposition Morphology with the Rotating Disk Electrode)

  • 남상철;엄성현;이충영;탁용석;남종우
    • 공업화학
    • /
    • 제8권4호
    • /
    • pp.645-652
    • /
    • 1997
  • 백금 회전전극을 이용하여 확산지배영역에서의 구리 착화합물의 환원에 대한 전기화학적 특성조사 및 이에 대한 속도인자들을 구하였다. 황산염 용액내에서 Cu(II)의 환원은 2전자, 1단계 반응이며, 염화물 용액내에서의 Cu(II)는 1전자, 2단계 반응으로 환원된다. 환원반응에서의 전달계수는 황산염 용액내에서 Cu(II)가 가장 작으며, 할로겐염 중에서 Cu(I)의 전달계수는 1에 가까운 값을 나타내었다. 염화물 용액안에서 구리이온의 환원에 대한 표준속도상수는 Cu(II)의 환원이 Cu(I)을 출발물질로 할 경우보다 100배 정도 빠른 값을 나타내었다. 그리고 확산계수는 $Cl^-$존재시의 Cu(II), $I^-$, $Br^-$, $Cl^-$존재시의 Cu(I) 및 $SO_4^{-2}$존재시의 Cu(II)의 순으로 증가하였으며, 각 용액 내에서의 구리이온의 반지름 및 확산에 대한 활성화 에너지도 위의 순서와 동일하게 감소하였다. 회전전극상의 구리전착의 경우 전착전위 및 농도에 따라 불균일한 전착표면을 형성하였으며, 이러한 전착표면의 불균일성은 UV/VIS로 분석이 가능하였다.

  • PDF

Electroanalytical Determination of Copper(II) Ions Using a Polymer Membrane Sensor

  • Oguz Ozbek;Meliha Burcu Gurdere;Caglar Berkel;Omer Isildak
    • Journal of Electrochemical Science and Technology
    • /
    • 제14권1호
    • /
    • pp.66-74
    • /
    • 2023
  • In this study, a new potentiometric sensor selective to copper(II) ions was developed and characterized. The developed sensor has a polymeric membrane and contains 4.0% electroactive material (ionophore), 33.0% poly(vinyl chloride) (PVC), 63.0% bis(2-ethylhexyl)sebacate (BEHS) and 1.0% potassium tetrakis(p-chlorophenyl)borate (KTpClPB). This novel copper(II)-selective sensor exhibits a Nernstian response over a wide concentration range from 1.0×10-6 to 1.0×10-1 mol L-1 with a slope of 29.6 (±1.2) mV decade-1, and a lower detection limit of 8.75×10-7 mol L-1. The sensor, which was produced economically by synthesizing the ionophore in the laboratory, has a good selectivity and repeatability, fast response time and stable potentiometric behaviour. The potential response of the sensor remains unaffected of pH in the range of 5.0-10.0. Based on the analytical applications of the sensor, we showed that it can be used as an indicator electrode in the quantification of Cu2+ ions by potentiometric titration against EDTA, and can also be successfully utilized for the determination of copper(II) ions in different real samples.