• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.20-34
• /
• 2006

This study was undertaken to assess the anthropogenic impact on trace metal concentrations (Zn, Cu, Pb, Cr, Ni, and Cd) of roadside sediments (N = 70) from No.7 national road within the watershed of Hoidong Reservoir in Pusan City and to estimate the potential mobility of selected metals using sequential extraction. We generally found high concentrations of metals, especially Zn, Cu and Pb, affected by anthropogenic inputs. Compared to the trace metal concentrations of uncontaminated stream sediments, arithmetic mean concentrations of roadside sediments were about 7 times higher for Cu, 4 times higher for Zn, 3 times higher for Pb and Cr and, 2 times higher for Ni and As. Speciation data on the basis of sequential extraction indicate that most of the trace metals considered do not occur in significant quantities in the exchangeable fraction, except for Cd and Ni whose exchangeable fractions are appreciable (average 29.3 and 25.8%, respectively). Other metals such as Zn (51.4%) and Pb (45.2%) are preferentially bound to the reducible fraction, and therefore they can be potentially released by a pH decrease and/or redox change. Copper is mainly found in the organic fraction, while Cd is highest in the exchangeable fraction, and Cr and Ni in the residual fraction. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Cd>Ni>Pb>Zn>Cr>Cu. Although the total concentration data showed that Zn was typically present in potentially harmful concentration levels, the data on metal partitioning indicated that Cd, Ni and Pb pose the highest potential hazard for runoff water. As potential changes of redox state and pH may remobilize the metals bound to carbonates, amorphous oxides, and/or organic matter, and may release and flush them through drain networks into the watershed of Hoidong Reservoir, careful monitoring of environmental conditions appears to be very important.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2000

Preferential flow has recently been the subject of increasing interest because these phenomena contribute to solute transport in soils. Commonly, preferential flow paths are associated with macropores or highly structured soils. We presented an analysis of the measured breakthrough curves (BTCs) of $Cl^-$ and $Cu^{2+}$ ions to test the occurrence of preferential flow in soils using miscible displacement technique under steady flow conditions. We also analyzed soil water retention curves and from this curves induced cumulative pore size distribution of undisturbed soils, which sampled from Ap1, B1, and C horizons of Songjeong series soils (the fine loamy, mesic family of Typic Hapludults). In this study, miscible displacement experiment on C horizon was excluded, because it is structureless sandy loam with saturated hydraulic conductivity of $5.2cmhr^{-1}$. The saturated hydraulic conductivity of Ap1 horizon was $2.0cmhr^{-1}$, which was about 7 times higher than that of B1 horizon ($0.27cm hr^{-1}$). Cumulative pore size distribution predicted that Ap1 horizon had more macropores (pore diameter larger than $49{\mu}m$, equivalent to -6 kpa of soil matric potential) than B1 horizon. The hydrodynamic dispersion coefficient from chloride BTCs was estimated as $1.3cm^2hr^{-1}$ for B1 and $34cm^2hr^{-1}$ for Ap1 horizon. However the retardation factors of B1 and Ap1 horizon were significantly different, i.e. 1 and 0.6, respectively, which means that there was distinct partition between mobile water and immobile phase in Ap1 horizon. The copper retardation effect of Ap1 horizon was less than that of B1 horizon, even though cation exchange capacity of Ap1 horizon was higher than that of B1 horizon. Thus, breakthrough curves of $Cl^-$ and $Cu^{2+}$ obviously showed the probability that preferential flow would occur in Ap1 horizon.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.4
• /
• pp.336-343
• /
• 2000

Purpose: Thallous-201 chloride produced at Korea Cancer Center Hospital(KCCH) is used in detecting cardiovascular disease and cancer. Thallium impurity can cause emesis, catharsis and nausea, so the presence of thallium and other metal impurities should be determined. According to USP and KP, their amounts must be less than 2 ppm in thallium and 5 ppm in total. In this study, the detection method of trace amounts of metal impurities in $[^{201}Tl]$TICI injection with polarography was optimized without environmental contamination. Materials and Methods: For the detection of metal impurities, Osteryoung Square Wave Stripping Voltammetry method was used in Bio-Analytical System (BAS) 50W polarograph. The voltammetry was composed of Dropping Mercury Electrode (DME) as a working electrode, Ag/AgCl as a reference electrode and Pt wire as a counter electrode. Square wave stripping method, which makes use of formation and deformation of amalgam, was adopted to determine the metal impurities, and pH 7 phosphate buffer was used as supporting electrolyte. Results: Tl, Cu and Pb in thallous-201 chloride solution were detected by scanning from 300 mV to -800 mV Calibration curves were made by using $TINO_3,\;CuSO_4\;and\;Pb(NO_3){_2}$ as standard solutions. Tl was confirmed at -450 mV peak potential and Cu at -50 mV Less than 2 ppm of Tl and Cu was detected and Pb was not detected in KCCH-produced thallous-201 chloride injection. Conclusion: Detection limit of thallium and copper is approximately 50 ppb with this method. As a result of this experiment, thallium and other metal impurities in thallous-201 chloride injection, produced at Korea Cancer Center Hospital, are in the regulation of USP and KP Polarograph could be applied for the determination of metal impurities in the quality control of radiopharmaceuticals conveniently without environmental contamination.

• Journal of Animal Environmental Science
• /
• v.12 no.3
• /
• pp.107-114
• /
• 2006

This study was carried out to investigate the effect of new foot-bath facility and detergent solution (sodium molylbdenate, citrate, potassium nitrate, tataric acid, sodium hypo-cholorite, and zinc sulfate) on claw health in lactating dairy cows. Minimal inhibition concentration (MIC) and minimal bactericidal concentration (MBC) of copper sulphate were 0.31% for E. coli and Bacillus isolated from cows claw. The MIC and MBC of new detergent for E. coli were 1.25% and 5%, respectively, however their respectively values for Bacillus were noticed 0.63% and 2.5%. Both 5E. coli and Bacillus populations in petri-dishes were significantly reduced (more than 95%) with the application of new detergent solution (5% or 16%). Locomotion score (LS 1-5; very good to severely bad) of lactating cows were significantly improved with in 30 days with the use of new detergent solution in foot bath. The LS2 (n=16), LS3 (n=16), and LS4 (n=7) were shown 100%, 43.8%, and 14.3% recovery rate within 30 days with the use of new detergent solution. However, LS5 (n=2) were not recovered to normal claw health and locomotion score within 30 days of new detergent application. Usage of new detergent solution for 60 days in a foot bath have shown 81.3%, 71.4% and 50.0% recovery rate in cows with LS3, LS4 and LS5, respectively. Abnormal claw incidence was reduced from 18.8% to 1.5% in overall herd (n=80) with the use of new detergent solution (16%) in a foot bath for 90 days. In conclusion, usage of 16% of our detergent solution for 60 days in a foot bath can significantly improve the cow claw health and thus mitigate the negative effects of abnormal claw on productivity of cows and dairy farm income.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2012

In this study, we configured a system which ranks hazardous chemicals to determine their management priorities based on experts' opinions and the existing CRS (chemical ranking and scoring). Aggregate exposure of food, health functional food, oriental/herbal medicine and cosmetics have been taken into account to determine management priority. In this study, 25 hazardous chemicals were selected, such as cadmium, lead, mercury, and arsenic, etc. These 25 materials were ranked according to their 1) risk (exposure or hazard) indexes, 2) exposure source-based weight, and 3) public interests, which were also formed based on the existing priority ranking system. Cadmium was scored the highest (178.5) and bisphenol A the lowest (56.8). Ten materials -- cadmium, lead, mercury, arsenic, tar, acrylamide, benzopyrene, aluminium, benzene, and PAHs -- scored higher than 100. Eight materials -- aflatoxin, manganese, phthalate, chromium, nitrate/nitrite, ethylcarbamate, formaldehyde, and copper -- recorded scores in the range from 70 to 100. Also evaluated as potential risks were 7 materials; sulfur dioxide, ochratoxin, dioxins, PCBs, fumonisin, methyl mercury, and bisphenol A, and these materials were scored above 50. Then we compared risk index and correlation coefficient of total scores to confirm the validity of the total scores; we analyzed correlation coefficient of parameter and indicator. We discovered that the total score and weight, which has incorporated public interests, were high and statistically significant. In conclusion, the result of this study contributes to strengthening risk assessment and risk management of hazardous chemicals.

• Journal of fish pathology
• /
• v.23 no.2
• /
• pp.245-254
• /
• 2010

Effects of heavy metal ions on the gene expression of cytochrome P4501A (CYP1A) were examined in cultured eel hepatocytes. When the expression of CYP1A mRNA was measured by RT-PCR after incubation of eel hepatocytes with benzo[$\alpha$]pyrene (B[$\alpha$]P) at concentrations of 10-8~10-5 M, the CYP1A expression increased with B[$\alpha$]P treatment in a dose dependent manner, showing significant increase at concentrations more than 10-7 M. When the eel hepatocyte was treated with cadmium (10-6 and 10-5 M), the expression of CYP1A was inhibited and especially at higher concentration (10-5 M). The inhibition of CYP1A expression by cadmium was also observed in cells treated with B[$\alpha$]P. In another study, effects of heavy metal ions on the expression of CYP1A were examined in cultured hepatocytes isolated from eel which was treated previously with B[$\alpha$]P in vivo. Hepatocytes isolated from the liver of eel taken at 48 hours after injection of B[$\alpha$]P (10 mg/kg) were cultured for 2 days with cadmium, copper, lead or zinc (10-6 and 10-5 M). The expression of CYP1A was found to be suppressed by the metal ions compared with the control in which CYP1A was induced with previous treatment of B[$\alpha$]P in vivo. The present results may provide an important basic information for studying the effects of heavy metal ions on CYP1A expression in other species of fish and studying toxicological mechanisms of heavy metal ions in aquatic livings.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.475-481
• /
• 2007

A total of 40 Korean native pigs (gilt 21, boar 19) were used to investigate the meat quality, nutritional and sensory properties by gender. Gilts had significantly lower moisture and ash contents (%) than boars, but protein contents were not significantly different between the gender (p<0.05). Gilts contained high intramuscular fat contents were significantly lower in Warner-Bratzler shear force (WBS) and Water holding capacity (WHC) when compared to those of boars. There was no significant difference in meat color L (lightness) and a (redness) values between the gender (p>0.05), but gilt had higher b (yellowiness) values than boar. Regarding amino acid compositions, there were glutamic acid (3.25%), aspartic acid (1.94%) lysine (1.83%), leucine (1.77%), alanine (1.17%) and arginine (1.15%) for gilts and boars. There were no significant differences in the contents of the minerals such as calcium, potassium, phosphorous, sodium, magnesium, iron, zinc and copper (p>0.05). The results of fatty acid composition showed that gilts had significantly higher C16:1n7, C18:1n9, in intramuscular fat., whereas they had significantly higher contents of C14:0, C16:0, C20:1n9, C20:5n3 in subcutaneous fat than boars (p<0.05). Boars had significantly higher contents of C18:0, C18:1n7, C18:2n6, C20:1n9, C20:4n6, C22:4n6 in intramuscular fat and they had significantly higher contents of C18:2n6, C22:4n6 than gilts in subcutaneous fat (p<0.05). In sensory evaluation, gilts had significantly higher scores in juiciness, tenderness and flavor when compared to boars (p<0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.45-52
• /
• 1989

The effects of soil properties and N, P and K application rates on the contents of inorganic constituents in the rhizomas of Ji-whang were investigated to know the condition for producing the better quality rhizoma of Ji-whang. Most of soil texture for Ji-whang cultivating belongs to sandy clay loam and sandy loam soils. The nitrogen contents in the rhizomas of Ji-whang was negatively correlated with the contents of organic matter and total nitrogen in surface soils, whereas positively correlated with the sand contents in subsoils. The calcium contents in the rhizomas of Ji-whang were negatively correlated with the sand contents, however, positively correlated with the contents of clay and organic matter in soils. The iron contents was positively correlated with the contents of clay, available phosphorus and exchangeable potassium in surface soils. Much more contents of the inorganic constituents in the leaf of Ji-whang was generally detected than that in the rhizoma of Ji-whang. The contents of iron and copper in the leaf was determined to be more than that in the rhizomas by ten times. In the results of field experiments, it is apparent that the nitrogen contents in the rhizoma and leaf increased with increasing N application rate more than 20kg/10a and 10kg/10a, respectively.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.132-149
• /
• 2011

In ancient period, a variety of inorganic or organic pigments had been used as colorants in various kinds of religious and secular paintings such as tomb paintings and wall and scroll paintings in buddhist temples, and danchung(cosmic patterns) for the surface of wooden buildings. This study discusses the results obtained from an analysis of the pigments on the wall paintings of Yeongsanjeon(Hall of Vulture Peak) in Tongdo temple by a qualitative analysis using a field-XRF. The results can be briefly summarized as follows. Firstly, assuming from the major components examined from F-XRF analysis, raw materials of pigment of each color are: red to be Cinnabar(HgS) or Hematite($Fe_2O_3$); white to be White Lead[$2PbCO_3{\cdot}Pb(OH)_2$] in most cases and Calcite($CaCO_3$) or Chalk($CaCO_3$), Kaolin($Al2O_3{\cdot}SiO_2{\cdot}4H_2O$) in some cases; yellow to be Yellow Ocher[$FeO(OH){\cdot}nH_2O$]; black to be carbon(C); green on the painted surface to be Celadonite[$K(Mg,Fe^{2+})(Fe^{3+},Al)(Si_4O_{10})(OH)_2$] in most cases; dark green on the halo of figures to be Malachite[$CuCO_3{\cdot}Cu(OH)_2$], Copper Green[$2CuO{\cdot}CO_2{\cdot}H_2O$] or Atacamite[$Cu_2Cl(OH)_3$]. Secondly, incarnadine and pink were made by mixing with more than two pigments such as red and white for making various tone of colors. The qualitative analysis of pigments on the wall paintings of Yeongsanjeon, in conclusion, displays that the all pigments for ancient periods are inorganis pigments. However, it has the limitation to identify a definite kinds of mineral for each pigment because it was not possible to collect samples from cultural heritage for conducting a crystalline analysis of XRD.