• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2339-2344
• /
• 2014

마이크로스트립 선로 형태의 전송선로 밑면에 플로팅 동판을 위치시키면 플로팅 동판과 접지면 사이의 단락 또는 개방 연결에 따라 전송선로는 마이크로스트립 선로 또는 코플라나 선로 형태로 동작하게 된다. 이러한 동작은 하나의 전송 선로 폭에 대해 서로 다른 두 개의 특성 임피던스를 가질 수 있음을 의미한다. 플로팅 동판이 존재하는 마이크로스트립 전송 선로를 이용하여 안정적인 입력 정합 상태를 가지며 조건에 따라 단순히 신호를 전달하는 2-단자 전력 전송 선로 또는 전력 분배가 가능한 2-way 전력 분배 회로로 동작할 수 있는 가변 전송선로를 제안 및 제작하였다. 제안된 회로는 코플라나 선로로 동작하는 경우에는 전력 전송 선로로 동작하고, 마이크로스트립 선로로 동작하는 경우에는 2-way 전력 분배 회로로 동작한다. 제작된 가변 전송 선로는 700 MHz 이상의 주파수에서 전력 전송 선로로 동작하는 경우 -0.2 dB 이내의 전달 손실($S_{21}$)과 -15 dB 이하의 반사 계수($S_{11}$)를 보였으며, 전력 분배 선로로 동작하는 경우에는 -10 dB 이하의 반사 계수($S_{11}$), -3.8 dB이내의 전달 손실($S_{21}$ or $S_{31}$), ${\pm}0.3dB$이내의 출력 전력차($S_{21}/S_{31}$)를 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.55-56
• /
• 2017

본 논문에서는 동일면 도파관(CPW; coplanar waveguide) 급전 방식을 이용하여 실내 디지털 TV(DTV)용 광대역 루프 안테나를 설계하였다. 제안된 루프 안테나는 정사각형 루프와 중앙 급전점을 연결하는 두 개의 원형 섹터로 구성되며, 아래쪽 원형섹터에 CPW 급전선로가 삽입된 형태이다. CPW 급전선로는 DTV응용을 위해 75옴 포트 임피던스와 정합하도록 설계되었으며, 중간 주파수 대역에서 임피던스 정합을 개선하기 위한 슬롯이 접지면에 추가되었다. 최적화된 안테나를 FR4 기판에 제작하고 특성을 실험한 결과, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 463-1,280 MHz으로 DTV 대역에서 동작하는 것을 확인하였다.

• Journal of Magnetics
• /
• 제11권3호
• /
• pp.130-134
• /
• 2006

The microwave power absorption for the patterned CoNbZr magnetic film has been investigated by coplanar waveguide method. The power absorption peaks of the patterned CoNbZr film (50 ${\mu}m$ ${\times}$ 2 mm ${\times}$ 2 ${\mu}m$), were observed at around 5.7 GHz. The observed resonance peak was in good agreement with calculated ferromagnetic resonance frequency including magnetic shape anisotropy effects. Compared with the coplanar waveguide without a magnetic film, the characteristic impedance of patterned film was shown to be increased. This resulted from the large increment of inductance up to 33 % without any significant changes of the capacitance.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.1-8
• /
• 2004

고속 저전력 디지털 시스템을 위해 클록 스큐를 최소화하고 동적 파워 소모를 줄이는 새로운 클록 분배 방법을 제안하였다. 제안된 방법은 접힌 라인구조(FCL)과 위상 섞임 회로(phase blending circuit)을 이용하여 Zero-skew 특성을 갖는다. FCL에 적합한 라인 구조를 분석하기 위해, 마이크로 스트립과 코플라너 라인을 FCL형 클록 라인으로 분배되었다. 시뮬레이션 결과는 l0㎜ 떨어져 있는 두 리시버 사이의 최대 클록 스큐가 1㎓에서 10psec보다 적고 20㎜ 떨어져 있는 두 리시버 사이의 최대 클록 스큐는 1㎓에서 60 psec보다 작음을 보였다. 또한, 공정, 전압, 온도 변화에 무관하게 클록 신호들의 스큐가 변하지 않음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1051-1057
• /
• 2000

A traveling-wave CPW(coplanar waveguide) electrode with abruptly broken input/output-taper for LiNbO$_3$optical modulator was designed and fabricated. The electrical characteristics of traveling-wave electrode on z-cut LiNbO$_3$crystal with SiO$_2$buffer layers were measured by network analyzer. To confirm the possibility of the electro-optic modulator electrode, detailed calculations of the impedance, microwave effective index and attenuation constants are presented as a function of the microwave electrode thickness, but the buffer layer thickness is fixed as 1${\mu}{\textrm}{m}$. These characteristics are discussed from the viewpoint of the device optimization and are expected to be design guides for the LiNbO$_3$modulator’s electrodes.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.118-120
• /
• 2016

A coplanar waveguide employing periodic 3D coupling structures (CWP3DCS) was developed for application in miniaturized on-chip passive components on silicon radio frequency integrated circuits (RFIC). The CWP3DCS showed the shortest wavelength of all silicon-based transmission line structures that have been reported to date. Using CWP3DCS, a highly miniaturized impedance transformer was fabricated on silicon substrate, and the resulting device showed good RF performance in a broad band from 4.6 GHz to 28.6 GHz. The device as was 0.04 mm² in size, which is only 0.74% of the size of the conventional transformer on silicon substrate.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.14-20
• /
• 2005

In this paper, a technique is presented for broadbanding the bow-tie slot antenna fed by a CPW(coplanar waveguide). The bandwidth performance of existing bow-tie slot designs is greatly enhanced by optimizing the slot shape and properly adjusting the characteristic impedance of the coplanar waveguide feeding the slot. To connect the 50-ohm input coaxial line to the CPW feed line, a linear taper in the CPW is employed. The designed antenna shows a 3.5 $\~$ 10.0 GHz impedance bandwidth, a 3.5 $\~$ 6.0 GHz pattern bandwidth, and a 5.5 $\~$ 7.5 dBi gain over 3.5 $\~$ 6.0 GHz. Above 6.0 GHz, the antenna radiation pattern appreciably deviates from the typical dipolar pattern.

• ETRI Journal
• /
• 제27권6호
• /
• pp.677-684
• /
• 2005

A phased array antenna was fabricated using four-element ferroelectric phase shifters with a coplanar waveguide (CPW) transmission line structure based on a $Ba_{0.6}Sr_{0.4}TiO_3(BST)/MgO$ structure. Epitaxial BST films were deposited on MgO (001) substrates by pulsed laser deposition. To attain the large differential phase shift and small losses for a ferroelectric CPW phase shifter, an impedance-matching-part adding technique between the effective transmission line and connecting cable was used. The return loss and insertion loss for this techniqueadapted BST CPW device were improved with respect to those for a normal BST CPW device. For an X-band phased array antenna system consisting of ferroelectric BST CPW phase shifters, power divider, dc block, patch antenna, and programmed dc power, the steering beam could be tilted by $15^{\circ}$ in either direction.