• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.728-733
• /
• 2009

지금까지의 하천 설계는 하천의 유량, 유사량, 하상토 입도분포, 강턱의 입자 또는 하도 표면의 특성, 하곡의 경사 등을 고려하여 안정한 횡단면을 결정하기 위한 목적으로 발전되어 왔다. 하지만, 하천 복원에 있어서 이동 하상의 안정 하도 및 하천을 설계하는 작업은 수리학적, 하천 형태학적, 그리고 유사 수리학적 측면에서 매우 복잡한 문제들을 포함하고 있으며 더 나아가 다양한 생태서식처 및 환경을 제공할 수 있는 측면까지도 고려하도록 요구되어 지고 있다. 자연하천 복원 설계시 가장 선행되어야 할 작업은 복원하고자 하는 현재의 하천 및 하도의 안정성에 대한 평가이며 이러한 과정에서 평형 하천의 개념을 반드시 고려해야 한다. 안정하도 및 평형하천 형태를 계산하는 방법들이 여러 연구자들에 의해 제안되어 왔고 여러 해석적 방법들 중 Copeland의 방법은 실제로 충적하천에서의 안정 하도 평가 및 설계에 가장 많이 이용되고 있으며 미공병단에 의해 개발된 SAM(Stable Channel Analysis Model) 모형에서 채택하고 있는 해석적 방법 중 하나이다. 본 연구에서는 Copeland의 해석적 안정하도 분석 방법을 기본 모듈로 채택하고 있는 미공병단에서 개발한 SAM(Stable Channel Analysis Model)의 기본적인 특성과 활용도에 대해서 알아보고 이를 남한강 제1지류인 청미천의 구하도 복원 예정 구간에 적용시켜 현재하도의 안정성을 평가하였다. 분석 결과, 안정하도 경사는 현재 하도 경사보다 완만한 것으로 나타났으나 SAM에서 예측하고 있는 청미천의 안정 하폭은 현재 하도의 하폭보다 훨씬 작은 것으로 나타났다. 이는 현재 청미천의 복원 구간에서 사주가 많이 발생하는 이유를 뒷받침 하는 결과라고 할 수 있다. 안정수심은 현재 하도의 수심보다 깊은 것으로 계산되었다. SAM을 이용한 계산 결과들은 현재하도의 안정성 평가뿐만 아니라 복원 구간의 안정하도 설계를 위한 기초자료로 활용될 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.305-313
• /
• 2010

River restoration or rehabilitation should be conducted in a way to maximize the channel stability with natural river configuration close to the equilibrium condition considering divers aspects of fluvial hydraulics, erosion and sedimentation, fluvial geomorphology, and ecological environment and to minimize the maintenance work. Therefore, the channel stability evaluation for present condition based on the equilibrium channel concept should be preceded for the river restoration project. Methods for equilibrium channel theory have generally been developed following either analytical regime theory or empirical regime theory. The main purpose of this paper is to evaluate the stability of present channel condition for the section of abandoned channel restoration in Cheongmi Stream using the Stable channel Analytical Model (SAM) and equilibrium hydraulic geometry equations. The results of analytical and empirical regime theories should provide fundamental and essential information to design the stable channel geometry. As a calculation result of Copeland's method for the study reach, the equilibrium channel has a narrower channel width, deeper water depth, and more gentle slope than the present channel geometry. As results of equilibrium hydraulic geometry equations, predicted equilibrium widths are less than the channel width in the field. It is represented that the current bed slope must be gentle to reach the equilibrium condition according to the results of Julien and Wargadalam method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.2
• /
• pp.141-147
• /
• 1995

Various numerical models for predicting wave deformation have been proposed. Among them a time-dependent mild-slope equation based on the line discharges and surface-elevation changes has been widely used in the wave fields with reflective waves. If applying this model to the case of obliquely-incident waves, not only the open-sea boundary but also one of the lateral boundaries should be treated as incident boundaries. In this study, Maruyama and Kajima (1985), Copeland (1985) and Ohnaka and Watanabe (1987)'s method are reviewed and the characteristics of these methods are analyzed using e normalized wave heights, wave angels and phases obtained from the numerical experiments. It is shown that Ohnaka and Watanabe(1987)'s method provides the most adequate driving boundary is the most suitable in e wave field with a general bottom slope.

• Journal of Korea Water Resources Association
• /
• v.46 no.2
• /
• pp.99-109
• /
• 2013

Increasing complexity of the basin environments makes it difficult for single decision maker to consider all relevant aspects of problem, and thus the uncertainty of decision making grows. This study attempts to develop an approach to quantify the spatial flood vulnerability of South Korea. Fuzzy TOPSIS is used to calculate individual preference by each group and then three GDM techniques (Borda count method, Condorcet method, and Copeland method) are used to integrate the individual preference. Finally, rankings from Fuzzy TOPSIS, TOPSIS, and GDM are compared with Spearman rank correlation, Kendall rank correlation, and Emond & Mason rank correlation. As a result, the rankings of some areas are dramatically changed by the use of GDM techniques. Because GDM technique in regional vulnerability assessment may cause a significant change in priorities, the model presented in this study should be considered for objective flood vulnerability assessment.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.65-83
• /
• 2017

As Global value chain(GVC) is deepening, the importance of intermediated good trade is growing in international trade issues. Such facts lead to much discussions about the relation between Global Outsourcing and pollution. This study analyzed the effect of Global outsourcing on Environment using the data including 21 industries for 2004-14. $CO_2$ intensity is used as a proxy for the environment variable and to measure Global outsourcing and I employed the method suggested by Feenstra and Hanson(1999), Amiti and Wei(2006). To examine the effect Global outsourcing on the Environment more precisely, this paper controlled the factors that can affect the environment level on the basis of the theory suggested by Copeland and Taylor(1994). In the methodology, System GMM is employed to solve endogenous problem. The results show that for overall industries, Global outsourcing effect cannot be identified and for polluting industries, the result is identical. However, Global outsourcing has a negative effect on the pollution level for China and developing countries. In other words, as Global outsourcing is increasing, the national pollution level is decreasing.