• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.469-474
• /
• 2004

본 논문에서는 비 홀로노믹적인 구속조건을 갖는 수중 이동체의 위치 및 자세제어에 관한 제어기법에 대해서 논의한다. 비 홀로노믹시스템은 적분 불가능한 구속조건으로부터 도출되어지는 시스템으로 연속시간영역의 피드백제어로는 평형점에서의 안정화제어가 불가능한 특성을 가지고 있다. 본 연구에서는 속도의 비 홀로노믹 구속조건을 가지는 수중 이동체에 대하여 체인드폼으로 변환하고 변환된 시스템에 대해 백스테핑 제어기법을 적용하여 자세제어를 행하였으며 수치시뮬레이션을 통하여 제어기법의 유용성을 평가하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.708-713
• /
• 1994

A new flux observer based vector control system of an induction motor is constructed by using an observer in which the commanded stator currents are used to estimate the rotor flux. In this system, the flux observer is formulated by using a model of induction motor in a stationary coordinate system. By considering an observer of induction motor in a fixed co-ordinate system located on its secondary flux, a slip frequency controlled type of vector control system is also proposed. From these control schemes, the relation between the conventional slip frequency controlled type system and the observer based one is clarified. The steady-state error of the developed torque which is caused by the parameter change of induction motor is analyzed and discussed for the selection of observer gains. The poles of the observer error dynamics and those of the observer based vector control system are calculated analytically by neglecting the machine parameter change. In order to analyze the robust stability, a linear model of the observer based vector control system is proposed taking into account the machine parameter change. By using this model, the trajectories of the poles and zeros of the torque transfer function are computed and discussed. To test validity of the theoretical analysis, experiments are conducted by using a digital signal processor (TMS320C30) and a current controlled voltage source PWM inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2120-2125
• /
• 2005

The principal idea of vibration isolation is to filter out the response of the system over the corner frequency. The isolation objectives are to transmit the attitude control torque within the bandwidth of the attitude control system and to filter all the high frequency components coming from vibration equipment above the bandwidth. However, when a reaction wheels or control momentum gyros control spacecraft attitude, vibration inevitably occurs and degrades the performance of sensitive devices. Therefore, vibration should be controlled or isolated for missions such as Earth observing, broadcasting and telecommunication between antenna and ground stations. For space applications, technicians designing controller have to consider a periodic vibration and disturbance to ensure system performance and robustness completing various missions. In general, past research isolating vibration commonly used 6 degree order freedom isolators such as Stewart and Mallock platforms. In this study, the vibration isolation device has 3 degree order freedom, one translational and two rotational motions. The origin of the coordinate is located at the center-of-gravity of the upper plane. In this paper, adaptive notch filter finds the disturbance frequency and the reference signal in filtered-x least mean square is generated by the notch frequency. The design parameters of the notch filter are updated continuously using recursive least square algorithm. Therefore, the adaptive filtered-x least mean square algorithm is applied to the vibration suppressing experiment without reference sensor. This paper shows the experimental results of an active vibration control using an adaptive filtered-x least mean squares algorithm.

• International Journal of Control, Automation, and Systems
• /
• 제5권5호
• /
• pp.559-569
• /
• 2007

In this paper, the dynamic controller design problem of a redundant planar 2-dof parallel manipulator is studied. Using the Euler-Lagrange equation, we formulate the dynamic model of the parallel manipulator in the joint space and propose an augmented PD controller with forward dynamic compensation for the parallel manipulator. By formulating the controller in the joint space, we eliminate the complex computation of the Jacobian matrix of joint angles with end-effector coordinate. So with less computation, our controller is easier to implement, and a shorter sampling period can be achieved, which makes the controller more suitable for high-speed motion control. Furthermore, with the combination of static friction model and viscous friction model, the active joint friction of the parallel manipulator is studied and compensated in the controller. Based on the dynamic parameters of the parallel manipulator evaluated by direct measurement and identification, motion control experiments are implemented. With the experiments, the validity of the dynamic model is proved and the performance of the controller is evaluated. Experiment results show that, with forward dynamic compensation, the augmented PD controller can improve the tracking performance of the parallel manipulator over the simple PD controller.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.505-519
• /
• 2005

In this paper, we develop an anti-sway control in proposed techniques for an ATC system. The developed algorithm is to build the optimal path of container motion and to calculate an anti-collision path for collision avoidance in its movement to the finial coordinate. Moreover, in order to show the effectiveness in this research, we compared NNP PID controller to be tuning parameters of controller using NN with 2 DOF PID controller. The simulation and experimental results show that the proposed control scheme guarantees performances, trolley position, sway angle and settling time in NNP PID controller than other controller. As the results in this paper, the application of NNP PID controller is analyzed to have robustness about disturbance which is wind of fixed pattern in the yard. Accordingly, the proposed algorithm in this study can be readily used for industrial applications.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.190-196
• /
• 2000

A hybrid position/force control scheme to regulate the force and position by dual arms is proposed where two arms are treated as one rm in a kinematic viewpoint. The force error calculated from the information of two force/torque sensors attached to the end of each arm is transferred to minimum configuration space coordinates and then is distributed to total system joint coordinates, The position adjustment at the total con-figuration coordinates is computed based on the effective compliance matrix with respect to total joint coordinates which is obtained by coordinate transformation between the task coordinates and the total joint coordinates. The proposed scheme is applied to sawing task. When the trajectory of the saw is planned to follow a line in a horizontal plane 2 position parameters are to be controlled(i.e., two translational positions) Also a certain level of contact force has to be controlled along the vertical direction(i.e. minus z-direction) not to loose the contact with the object to be sawn. We experimentally show that the performance of the velocity and force response are satisfactory. The proposed hybrid control scheme can be applied to arbitrary two cooperating arm system regardless of their kinematic structure and the number of actuated joints.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.87-99
• /
• 1999

A shop floor control system(SFCS) performs the production activities required to fill orders. In order to effectively control these activities, the autonomous agent-based heterarchical shop floor control architecture is adopted where a supervisor does not exist. In this paper, we define functional perspective of the heterarchical shop floor control using planning, scheduling, and execution modules. In particular, we focus on an execution module that can coordinate the planning and scheduling modules and a general execution module that easily can be modified to execute the other equipment. The execution module can be defined informally as a module that downloads and performs a set of scheduled tasks. The execution module is also responsible for identifying and resolving various errors whether they come from hardware or software. The purpose of this research is to identify all the execution activities and solving techniques under the assumptions of the heterarchical control architecture. And we model the execution module in object-oriented modelling technique for generalization. The execution module modeled in object-oriented concept can be adopted to the other execution module easily. This paper also proposes a classification scheme for execution activities of the heterarchical control architecture. Petri-nets are used as a unified framework for modeling and controlling execution activities. For solving the nonexistence of a supervisor, a negotiation-based solution technique is utilized.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.257-262
• /
• 2001

본 논문에서는 WDM 기반의 Local Network에서 가변길이 메시지를 수용하기 위한 스케줄링 프로토콜을 제안하였다. 제안된 프로토콜은 제어채널을 예약슬롯과 제어슬롯으로 나누어 제어 패킷의 충돌로 인한 액세스 지연시간을 최소화하였다. 즉, 전송할 메시지가 있는 노드는 빈 제어슬롯이 있으면 제어패킷을 제어슬롯에 전송하고 메시지를 전송한다. 그리고 메시지의 전송이 완료될 때까지 주기적으로 제어패킷을 전송하여 가변길이의 메시지를 전송할 수 있도록 하였다. 또한 빈 제어슬롯이 없는 경우에는 예약슬롯을 이용하여 가장 가까운 시간에 메시지를 전송하기 위한 데이터 슬롯을 미리 예약하여 제어패킷의 충돌로 인한 재전송 횟수를 감소시켰다. 제안된 알고리즘은 기존 프로토콜의 문제점을 해결하였으며 성능향상과 액세스지연시간의 감소 효과를 보였다.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1088-1095
• /
• 2009

In this paper, we describe the reorientation method of distorted road sign by using projection transformation for improving recognition rate of road sign. RSR (Road Sign Recognition) is one of the most important topics for implementing driver assistance in intelligent transportation systems using pattern recognition and vision technology. The RS (Road Sign) includes direction of road or place name, and intersection for obtaining the road information. We acquire input images from mounted camera on vehicle. However, the road signs are often appeared with rotation, skew, and distortion by perspective camera. In order to obtain the correct road sign overcoming these problems, projection transformation is used to transform from 4 points of image coordinate to 4 points of world coordinate. The 4 vertices points are obtained using the trajectory as the distance from the mass center to the boundary of the object. Then, the candidate areas of road sign are transformed from distorted image by using homography transformation matrix. Internal information of reoriented road signs is segmented with arrow and the corresponding indicated place name. Arrow area is the largest labeled one. Also, the number of group of place names equals to that of arrow heads. Characters of the road sign are segmented by using vertical and horizontal histograms, and each character is recognized by using SAD (Sum of Absolute Difference). From the experiments, the proposed method has shown the higher recognition results than the image without reorientation.

• 제어로봇시스템학회논문지
• /
• 제22권10호
• /
• pp.839-846
• /
• 2016

Bin picking is a task of picking a small object from a bin. For accurate bin picking, the 3D pose information, position, and orientation of a small object is required because the object is mixed with other objects of the same type in the bin. Using this 3D pose information, a robotic gripper can pick an object using exact distance and orientation measurements. In this paper, we propose a 3D vision technique for accurate measurement of 3D position and orientation of small objects, on which a paper label is stuck to the surface. We use a maximally stable extremal regions (MSERs) algorithm to detect the label areas in a left bin image acquired from a stereo camera. In each label area, image features are detected and their correlation with a right image is determined by a stereo vision technique. Then, the 3D position and orientation of the objects are measured accurately using a transformation from the camera coordinate system to the new label coordinate system. For stable measurement during a bin picking task, the pose information is filtered by averaging at fixed time intervals. Our experimental results indicate that the proposed technique yields pose accuracy between 0.4~0.5mm in positional measurements and $0.2-0.6^{\circ}$ in angle measurements.