• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.330-335
• /
• 2013

This paper performs two kinds of Field-Oriented Control (FOC) for dual three phase permanent magnet synchronous motor (DTP-PMSM).The first is based on vector space decomposition to study the effect of current harmonics on electromechanical energy conversion. And the second presents the coupling relations between two sets of windings using two d-q transformation. And then this paper has deeply studied the differences between these two strategies, the different effect on the control of harmonic current and the reason for these differences. MATLAB-based Simulation studies of a 3KW DTP-PMSM are carried out to verify the analysis of differences between the two FOC strategies.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.754-763
• /
• 2014

In this paper a method for the development of a static VAR compensator (SVC) control algorithm is presented. The proposed algorithm has been designed with the objective of eliminating the negative impact of electric arc furnaces on the power system. First, a mathematical model of the proposed SVC controller in the d-q synchronous rotating coordinate system is developed. An analysis under dynamic and steady state conditions is also carried out. The efficiency of the presented controller is demonstrated by means of computer simulations of an actual steel-factory network model. The major advantages of the proposed controller are better flicker compensation, increased ability to regulate voltage and the need for only one-point network measurements.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.226-233
• /
• 1999

A transmitting antenna mounted on the naval vessels can be easily exited by exogenous disturbances such as wave and impact. Gimbal system need for the controller to maintain the robust performance against various modeling uncertainties and disturbances. PI controller, however, cannot supply good robust performance under situation. Thus a robust $H_{\infty}$ control scheme is used to ensure a specified dynamic response under above conditions. Gimbal system controlled simplified as 2 DOF system that ignored coordinate co-relations of each direction and hydraulic system is linearly modelled. In this paper, we compared those of simulation to the results of experiment and H$_{\infty}$ controller, proposed, showed the good response and stability than PI controller.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.250-255
• /
• 2003

The position of a 3-dimensional(3D) point can be measured by using calibrated stereo camera. To obtain more accurate measurement ,more accurate camera calibration is required. There are many existing methods to calibrate camera. The simple linear methods are usually not accurate due to nonlinear lens distortion. The nonlinear methods are accurate more than linear method, but it increase computational cost and good initial guess is needed. The multi step methods need to know some camera parameters of used camera. Recent years, these explicit model based camera calibration work with the development of more precise camera models involving correction of lens distortion. But these explicit model based camera calibration have disadvantages. So implicit camera calibration methods have been derived. One of the popular implicit camera calibration method is to use neural network. In this paper, we propose implicit stereo camera calibration method for 3D reconstruction using support vector machine. SVM can learn the relationship between 3D coordinate and image coordinate, and it shows the robust property with the presence of noise and lens distortion, results of simulation are shown in section 4.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2681-2692
• /
• 1996

The finite-volume method for radiation in a three-dimensional non-orthogonal gas turbine combustion chamber with absorbing, emitting and anisotropically scattering medium is presented. The governing radiative transfer equation and its discretization equation using the step scheme are examined, while geometric relations which transform the Cartesian coordinate to a general body-fitted coordinate are provided to close the finite-volume formulation. The scattering phase function is modeled by a Legendre polynomial series. After a benchmark solution for three-dimensional rectangular combustor is obtained to validate the present formulation, a problem in three-dimensional non-orthogonal gas turbine combustor is investigated by changing such parameters as scattering albedo, scattering phase function and optical thickness. Heat flux in case of isotropic scattering is the same as that of non-scattering with specified heat generation in the medium. Forward scattering is found to produce higher radiative heat flux at hot and cold wall than backward scattering and optical thickness is also shown to play an important role in the problem. Results show that finite-volume method for radiation works well in orthogonal and non-orthogonal systems.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1124-1128
• /
• 2005

In this paper, a plan-coordination architecture is proposed for multi-agent control in the fractal manufacturing system (FrMS). A fractal in FrMS is a set of distributed agents whose goal can be achieved through cooperation, coordination, and negotiation with other agents. Since each agent in the FrMS generates, achieves, and modifies its own plan fragments autonomously during the coordination process with other agents, it is necessary to develop a systematic methodology for the achievement of global plan in the manufacturing system. The heterarchical structure of the FrMS provides a compromised plan-coordination approach, it compromise a centralized plan-generation/execution (which mainly focuses on the maximization of throughput) with a distributed one (which focuses on the autonomy of each module and flexibility of the whole system). Plan-coordinators in lower level fractal independently generate plan fragments according to the global plan of higher level fractal, and plan-coordinators in higher level fractal mediate/coordinate the plan fragments to enhance the global performance of the system. This paper assumes that generation method of the plan fragments and the negotiation policy of the fractal is achieved by a simple process, and we mainly focuses on the information exchanging and distributed decision making process to coordinate the combinations of plan fragments within a limited exchange of information.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.231-242
• /
• 2001

본 논문에서는 영구자석형 동기 전동기 고정자의 상 권선 인덕턴스에 의하여 지연되는 정현과 서류 지연 성분을 보상함으로써 전동기 발생 토크 특성을 개선하는 방법과 구현 방법을 제시하였다. 이 방법은 축 변환을 사용하지 않기 때문에 하드와이어드 로직에 의하여 구현함으로써 구현이 간단하고 축 변환에 의한 지연을 제거할 수 있다. 특히, 고정자 상 권선 인덕턴스에 의한 지연성분은 전동기 회전 속도에 따라 변화하며, 본 논문에서 제시한 방법을 이용하면 전동기 회전 속도에 따른 동적인 보상을 할 수 있다. 존 논문에서 제시한 방법의 효과를 입증하기 위하여 4극 3상 영구자석형 동기 전동기를 대상으로 실험을 행하였으며, 실험결과 모든 운전 속도에서 발생 토크가 증가함을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.299-309
• /
• 2014

When biped robots make turns, the ability to walk stably and precisely along any circular path is crucial. In this context, inverse kinematics solutions are found for accurate gait realization, and new zero moment point(ZMP) equations are derived with respect to the cyclindrical coordinate system to facilitate generation of stable walking patterns. Then, appropriate steady and transitional walking patterns are both proposed in form of time functons. Subsequently, walking patterns for a path but of different speeds are generated using the functions and associated formulas, and preliminarily checked for stability based on the ZMP equations. Upon comparison of those cases, one can see how and when robots may fall down during circular walking. Finally, those patterns are put to test on the sample robot by ADAMS(R) along with the inverse kinematics solutions and a new balance control scheme compensating for insufficient stability particulary during the initial transition period. Test results show that the robot can walk along the circular path as predicted at a resonably high speed despite the distributed mass and ground contact effects, validating effectiveness of the suggested approach.

• 환경영향평가
• /
• 제10권2호
• /
• pp.135-145
• /
• 2001

This study was conducted to investigate the practical using of Geographic Information System(GIS) technology which are computer-based systems that are used to store and manipulate geographic information on the air pollution control and management in the macro city. For this study 130 samples were corrected by passive sampler in Seoul (25 distincts) distributed by TM-coordinate during November in 1997 to January 1998, and analysed by GC/MSD for 16 VOCs e.g., toluene, benzene and display using Arc/view GIS(version 3.2, ESRI Inc, U.S.A) for windows. The most VOCs concentration distribution in November, 1997 was higher than that of January, 1998 except benzene and 1,1,2-trichroloethan, bromobenzene. And products of the distribution of VOCs concentration display using GIS technology was effective as well as other display methods(e.g., contouring method, pie or column chart, graduated symbols), especially in mapping and symbolization capabilities for spatial pollutant status evaluation were very effective than other display methods.