• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1502-1511
• /
• 2013

In this study, simulation works have been performed for the modeling of $CO_2$ removal process contained in the DME production process through an absorber-stripper system using methanol aqueous solution. Aspen Plus release 7.3 in AspenTech company was utilized as a simulation tool and PC-SAFT modeling equation of state was used as a thermodynamic model. Fitting parameters built-in PC-SAFT model was determined by regressing experimental data, predicted results using PC-SAFT model were compared with experimental data in order to verify the exactness of the thermodynamic model. Optimization works have been performed to reduce the utility consumptions using solvent circulation rate, column operating pressure and feed stage location as manipulated variables.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.805-810
• /
• 2006

Defects in the conventional casting process of silver jewelry can result in famished products of mediocre hardness. To overcome the shortcomings of conventional methods, we proposed new press forming process, which involves applying uniaxial pressure on casting 92.5%Ag-6.5%Cu-1%Zn ring elements and shaping with a lath. We investigated Vickers hardness, density, and microstructure evolution by changing the applied uniaxial pressure. We report that our newly proposed process can increase the hardness up to 2.3 times and decrease average grain size by 50%. Our method leads to drastic mechanical property enhancements, and is thus suitable for casting tension-style jewelry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.96-102
• /
• 2007

Welding deformation causes critical problems under construction and in use of steel structures by varying the magnitude of the steel structures and deteriorating mechanic strength. Existing method to construct steel structures in civil engineering needs preassembly process for a part of or the whole structures on a broad space to examine the size of structures inevitably varied in the process of welding (assembly process). It leads to waste of time, space and human efforts, worry of safety accidents with the characteristic of the work to be performed on a high place, and non-efficiency and non-economy by using such supplementary equipments as crane. This paper, to remove the needless preassembly process by pre-estimating welding deformation produced under construction of large steel structures, devises a method modeling welded part for applying the equivalence load method and examines the effects of welding sequence and self weight on welding deformation by the method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3698-3703
• /
• 2012

The architectural design process is consisted of the phase of programming and the phase of the design. The contemporary architectural scheme, as a datascape, a rhizome structure and a diagram, is based on the concept of modern physics. And it is applied on the phase of design by synthesizing data. Like this, the design of the architectural field is accomplished in the phase of design. For design of the architectural field, the characteristics of the architectural field is considered as the viewpoint of design in the procedure. First, according to the area which is defined by relations of environments, around architectures and so on, the net system of relations is designed as area. Second, design the linkage between building and space, building and building, space and space, according to the correspondence each other. Third, design the method or form of connecting building and space to one as a building and a space are no longer divided but are understood by one. As a result, for the design of architectural field, it is necessary to define the criteria by the characteristics of architectural field and the architectural field is designed by process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.464-469
• /
• 2017

This study evaluated the displacements of a Cu bar in the Y-direction and the relationship between swaging pressures and total contact forces to increase the productivity of the rotor core swaging process. Elastic-plastic numerical analyses of four different Cu bar shapes were performed with a constant swaging pressure to evaluate the displacements of the Cu bar in the Y-direction and the contact force distributions at the contact surfaces during the swaging process. Based on the numerical analysis results, the following conclusions were obtained. First, a simplified 2-dimensional cyclic symmetric analysis model was developed for the numerical analysis of the rotor core swaging process. Second, the final displacements of the Cu bar in the Y-direction were nearly the same as the change of the Cu bar size at a constant swaging pressure. Third, a linear relationship between the swaging pressures and the total contact forces, the so called resistance forces, was suggested.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.247-258
• /
• 2012

It seems most important for a manufacturing company to be well aware of its relationship with suppliers. This is why it is essential to analyze and control the structural relationship among CEO's characteristics, relations between suppliers and manufacturers and new product development performances affected by such relations. The present study may be summed up as follows: First, from the analysis of characteristics of manufacturing company's CEO and relations between suppliers and manufacturers, it could be verified that CEO's characteristics exercised influence upon sharing of product development process and upon cooperation for technical manpower, but not upon sharing of core technologies, signifying the fact that nothing could be more important than the role of CEO who has strong will to improve his or her relations with suppliers; and Second, from the analysis of relations between suppliers and manufacturers as well as relations between management and new product development performances, it became evident that both management performance and product development performance were affected by sharing of product development process. It was also known that cooperation for technical development process had influence upon the product development performance but not upon the management performance. Furthermore, the analysis showed that both management performance as well as product development performance were affected by sharing of core technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.366-376
• /
• 2019

Youth unemployment reached a record high in 2017, and business revitalization is emerging as a means of overcoming this situation. The number of venture companies and amounts of new venture investments are increasing year on year, and the government has upgraded Small and Medium Business Administration to the Ministry of SMEs and Startups. However, the success rate of startups is relatively poor. Over the past three years only 39.1% of Korean startups survived and 90% of companies failed in the Valley of Death phase. Survival this phase is critical for early startups, and thus, the amount and timing of investments are critical. Current models for establishing business startups do not effectively attract investments because they lack practical, corporate evaluation variables. In this paper, we develop a mixed process that incorporates the factors and business models focused on by venture capital investors. In addition, we compared our Death Valley Venture (DVV) process with current methods and provide an example of its application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.448-466
• /
• 2019

Today, companies are increasingly focused on SCM (Supply Chain Management) as a means for cost-cutting and efficient operation. The company's ultimate objective is to win and maintain a sustained dominant position in the uncertainties of the global environment and future competitiveness. In this respect, this study examined the effects of management strategy, collaboration process and SCM integration on corporate performance in small and midsize parts manufacturers. The results of empirical analysis are summarized as follows. Management strategy, collaboration process and SCM integration had positive effects on corporate performance in domestic small and midsize parts manufacturers, and all hypotheses were supported. Consequently, it can be confirmed that quality, cost and flexibility for management strategy, and strategic objective perception, support policy, problem solution and knowledge information sharing for delivery and collaboration as small and midsize parts manufacturers are mechanisms for improving quality reliability, decreasing cost, delivery obedience and information system operation of SCM integration, and boosting corporate quantitative and qualitative performance.