• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.132-138
• /
• 2008

We investigated the biomechanical properties of a newly designed self-expansion type anterior cruciate ligament (ACL) anchor. The ACL anchor consists of the ring section giving the elastic force, the wedge for maintaining in contact with the femur tunnel wall and the link suspending hamstring graft or artificial ligament. The main design parameters that determine the performance of this device were the expansion angle (${\theta}$) and the thickness ($t_R$). The Ti6Al4V anchors were heated after inserting in a jig for 1 hour at $800^{\circ}C$ in a protective argon gas atmosphere and allowed to cool to room temperature in the furnace. In order to investigate the influence of the expansion angle and the thickness of the ring on the biomechanical properties of the anchor, the maximum pull-out load, stiffness and slippage of the ACL anchor were measured using the pull-out tester, and statistical analyses were also executed. The present results showed that the design parameters gave a significant effect on the performance of the self- expansion type of anchor. The pull-out load of the ACL anchors significantly increased as the thickness of the ring section was increased, having a similar trend for both expansion angles. The ACL anchor showed about 2.5 times higher values of the pull-out load than that of the minimum load (500N)required for the "accelerated rehabilitation". The optimum ${\theta}$ and $t_R$ values of this ACL anchor were suggested to have sufficient resistance against the pull-out force, high stiffness and relatively low slippage after ACL reconstruction.

• Physical Therapy Korea
• /
• v.14 no.2
• /
• pp.53-60
• /
• 2007

The objective of this study was to discover the effects of the short-term home visiting physical therapy program involving patients with some chronic brain disorders at Gimhae City, Kyongnam. Recovery of activities of daily living (ADL) is a very important factor of rehabilitative procedures, and Functional Independence Measure (FIM) is a useful standard of evaluation for it. The FIM is widely used in brain disorder research because it measures real functional activities of daily living. We applied the physical therapy exercise program twice per week (10~15 times repeatedly); a warm-up and cool down exercise performed every ten minutes by active & active-assistive ROM and stretching exercises. Main exercises were composed of getting up & laying down in bed, standing training, walking exercise in the room, and window or wall sliding exercise using affected upper limbs for a total duration of 30 minutes. We collected the data from 20 patients with chronic brain disorders at his/her home and analyzed by means of SPSS/PC+ program (Ver. 10.0). After the six week long physical therapy exercise program, the average was $56.10{\pm}22.59$ point compared with initial $50.55{\pm}19.12$ point by FIM, improved functional ADL ability about 5.55 point, and these changed scores were statistically significant (p=.000). We also studied another factor regarding patient's satisfaction. The majority of subjects (10 people) rated the program with the maximum score of ten points (50.0%), and three people rated it a seven point program (15.0%), the other two subjects gave a rating of nine and eight points (10.0%). Because the program was effective at improving the physical ADL ability and satisfaction of each subject, we suggest continual development and implementation of a home visiting physical therapy program. Further study should involve a longer period of observation with a larger population that is involved in an individually designed home physical therapy program.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.94-103
• /
• 2016

A regeneratively-cooled channel in a liquid rocket engine is used to effectively cool a combustion chamber inner wall from hot combustion gas, and the heat transfer/pressure loss characteristics should be predicted in advance to design cooling channels. In the present research, five cooling channels with different geometric dimensions were designed and the channels were respectively manufactured using cutter and endmill. By changing coolant velocity and downstream pressure, the effects of manufacturing method, channel shape, and flow condition on pressure losses were experimentally investigated and the results were compared with the analytical results. At same channel shape and flow condition, the pressure loss in the channel machined by the cutter was lower than that by the endmill. It was also found that the pressure loss ratio between the experimental result and the analytical data changed with the channel shape and flow condition.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1066-1080
• /
• 2024

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.

• Journal of the Korean Institute of Gas
• /
• v.14 no.5
• /
• pp.13-18
• /
• 2010

This paper presents the development of an integrated control and safety management system for 9% nickel steel LNG storage tank. The new system added the measuring equipment of pressure, displacement and force compared to the conventional measurement and control system. The measured data has simultaneously been processed by integrating and analyzing with new control equipments and safety management systems. The integrated control and safety management system, which may increase a safety and efficiency of a super-large full containment LNG storage tank, added additional pressure gauges and new displacement/force sensors at the outer side wall and a welding zone of a stiffener and top girder of an inner tank, and the inner side wall of a corner protection tank. The displacement and force sensors may provide failure clues of 9% nickel steel structures such as an inner tank and a corner protection, and a LNG leakage from the inner tank. The conventional leak sensor may not provide proper information on 9% nickel steel tank fracture even though LNG is leaked until the leak detector, which is placed at the insulation area between an inner tank and a corner protection tank, sends a warning signal. Thus, the new integrated control and safety management system is to collect and analyze the temperature, pressure, displacement, force, and LNG density, which are related to the tank system safety and leakage control from the inner tank. The digital data are also measured from control systems such as displacement and force of 9% nickel steel tank safety, LNG level and density, cool-down process, leakage, and pressure controls.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2011

This study was carried out to investigate the effects of several cooling methods such as water hose cooling, mist, fog and control on growth and microclimate, and to develop a simple nutriculture bed for production of fresh leaves of narrowhead goldenaray 'Ligularia stenocephala'. When the root-zone was cooled with 240 L/hr flow rate of $13^{\circ}C$ ground water using water hose, the temperature was lowered approximately by 2 to $3^{\circ}C$ than that of control. The growth of narrowhead goldenaray were favorable in the water hose cooling compared with the other cooling methods. Nutrient culture system having part cooling effect around plant canopy was developed. The system was composed of 15 cm diameter of water hose on side wall of beds, cooling hose, and expanded rice hull media as organic substrate. When cool water which the temperature changed in the range of 14 to $22^{\circ}C$ diurnally with 240 L/hr of flow rate through water hose, the air temperature around canopy and root-zone temperature were dropped by $0.5^{\circ}C$ and $3^{\circ}C$ compared with that of conventional styrofoam bed, respectively. These results showed that newly devised bed system using water hose was simple and economical for the production of high quality narrowhead goldenaray leaves. This system might be practically used both at summer and winter season for the cultivation of narrow head goldenaray by part cooling or heating around root-zone and plant canopy.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.149-167
• /
• 2001

Today, every culture has taken on the compromise form by means of the cultural difference, variety, and pluralism according to the internationalization and the advance so that it has been developed toward the half-blooded and multilayered the aspect. In accordance with this current of the times, this thesis observed the feminism found in the multiculturism of the end of the 20th century, the third world, and technology with the side of the tendency of modern fashion, considered the hybride phenomenon which is pulling down the wall between culture and genre due to the social diversification. and predicted the fashion trend do 21st century serf on it. Multiculturism is the movement that began to arise in the academic world of America and the literary world form the close of 1980's in accepting the variety of culture and regarding the culture with the more balanced and wide view and just as it is, it means the attitude of accepting one or more cultures of variely and the position of taking interest in the culture of minority race not the culture of a governing race. It is the fashion of feminism adapts dualism like unisex, androgynous look, etc of bisexual lendency in the 1980's, it shows new style with crossover of liberal sense because there is not the difference of sex in fashion. The eco-feminism pursues the natural sexuality not being instrumental and dismantling and expressed it in the Gender expression of an integrated human being. The trend of ethnic fashion in the close of 20th century is that the element of hippie is working so strongly. By adding embroidery of Oriental style, accessories of Indian style, feathers, beads, a hempen hood to the ethnic costumes of Asia and Latin, is shows the figure of ethnic hippie. As the cycler fashion is the future clothes through technology of computer, it uses a cool glass material bringing up the image of a spacesuit in order to expresses cyber image through artificial color combination of sheen colors, Though this techno-color fashion has established the fresh stimulation and the innovative aspect with ultramodern materials and image of futurism, it transmits a hope of estranged people and the natural elements. Hybride means a cross and mixture of animal and plant in Korean and is also called fusion. The phenomenon of hybrid predicts to comes the period of a cross and variation because something completely new comes into the world by contamination, mixture and compromise through meeting something different each other and it has on advantage of developing something existing to one more stage. It is prospected that in the society of 21st century, the borderline of traditional gender will be disappeared, variety and individuality will determine the individual behavior, and the masculine value will be substituted by feminine value. In the society giving priority to feminine value, a fashion stuck closely to women is what must reflect lives of woman under the proposition of woman's beauty, being on original function. So, it is considered that a fashion with added convenience and practicality having the function which is easy to put on, comfortable to act, able to express solves so much, and able to show various appearances according to T.P.O will get into the spotlight.

• Trans-
• /
• v.15
• /
• pp.25-56
• /
• 2023

VR is a dynamic image simulation technology with very high information density. Among them, spatial depth, temporality, and realism bring an unprecedented sense of immersion to the experience. However, due to its high information density, the information contained in it is very easy to be manipulated, creating an illusion of objectivity. Users need guidance to help them interpret the high density of dynamic image information. Just like setting up navigation interfaces and interactivity in games, interactivity in virtual reality is a way to interpret virtual content. At present, domestic research on VR content is mainly focused on technology exploration and visual aesthetic experience. However, there is still a lack of research on interactive storytelling design, which is an important part of VR content creation. In order to explore a better interactive storytelling model in virtual reality content, this paper analyzes the interactive storytelling features of the VR animated version of <Wolves in the walls> through the methods of literature review and case study. We find that the following rules can be followed when creating VR content: 1. the VR environment should fully utilize the advantages of free movement for users, and users should not be viewed as mere observers. The user's sense of presence should be fully considered when designing interaction modules. Break down the "fourth wall" to encourage audience interaction in the virtual reality environment, and make the hot media of VR "cool". 2.Provide developer-driven narrative in the early stages of the work so that users are not confused about the ambiguous world situation when they first enter a virtual environment with a high degree of freedom. 1.Unlike some games that guide users through text, you can guide them through a more natural interactive approach that adds natural dialog between the user and story characters (NPC). Also, since gaze guidance is an important part of story progression, you should set up spatial scene user gaze guidance elements within it. For example, you can provide eye-following cues, motion cues, language cues, and more. By analyzing the interactive storytelling features and innovations of the VR animation <Wolves in the walls>, I hope to summarize the main elements of interactive storytelling from its content. Based on this, I hope to explore how to better showcase interactive storytelling in virtual reality content and provide thoughts on future VR content creation.