• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.29-32
• /
• 2000

In this paper, we present an extension of the multi-code CDMA (code division multiple access) systems based on bi-orthogonal modulation by employing a convolutional encoder and an interleaver before serial-to-parallel conversion in the modulator. Bandwidth expansion by the convolutional encoder can be compensated for by the bi-orthogonal modulation, and the interleaver in the system scrambles the convolutionally encoded data bits so that, after serial-to-parallel conversion, each code channel conveys those bits far apart in time. The result is that the proposed system with several order of magnitude less implementational complexity, achieves quite close performance of the conventional systems comprised of Walsh modulation and multiple convolutional encoders and interleavers in all the code channels.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1528-1543
• /
• 2011

With increasing the using of wireless technologies in essential fields such as the medical application, this paper proposes different scenarios for the transmission of images over wireless networks. The paper uses the IEEE ZigBee 802.15.4 for applying the proposed schemes. It is a Wireless Personal Area Network (WPAN). This paper presents a novel chaotic interleaving scheme against error bursts. Also, the paper studies the proposed interleaver with the convolutional code with different constraint lengths (K). A comparison study between the standard scheme and proposed schemes for image transmission over a correlated fading channel is presented. The simulation results show the superiority of the proposed chaotic interleaving scheme over the traditional schemes. Also, the chaotic interleaver packet-by-packet basis gives a high quality image with (K=3) and reduces the need for the complex encoder with K=7.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.162-177
• /
• 2012

In this paper we present a novel method of applying image scrambling technology which belongs to the information hiding field in the error control coding to introduce confidentiality in wireless machine to machine communication. The interleaver in serial concatenated convolutional codes, which is the key module in overcoming burst errors, is deliberately designed with the scrambling function to provide a low error rate for those authorized transceivers. By contrast, the unauthorized transceivers without keys would get so high an error rate that decoding bits could bring little value, thus realizing both the confidentiality and reliability in wireless machine to machine communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2424-2429
• /
• 1999

In this paper, we present a memory efficient implementation method of channel encoder using convolutional encoding and interleaving. In conventional method, two separate RAMs must be used for the channel encoder: one RAM for storing frame data and another RAM for interleaving. In our method, without using interleaving RAM, we only use two small RAMs for buffering input frame data. We can process convolutional encoding and interleaving concurrently by using the two RAMs. There are several advantages when applying channel encoder designed using this method to several digital mobile telecommunications : the reduction of memory size ranging 33 % - 60 %, simplified procedure of receiving frame data, and resultant timing margin gained by the simplified procedure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.766-769
• /
• 2009

In this paper we propose a new turbo coded T-DMB system that replaces the existing RS code, convolutional interleaver and RCPC code by a turbo code without altering the puncturing procedure and puncturing vectors defined in the standard T-DMB system for compatibility. Simulation results show that the new turbo coded system yields considerable performance gain after just 2 iterations.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.269-275
• /
• 2014

The DAB system was designed to provide CD quality audio and data services for fixed, portable and mobile applications with the required BER below $10^{-4}$. However for the T-DMB system with the video service of MPEG-4 stream, BER should go down $10^{-8}$ by adding FEC blocks which consist of the Reed-Solomon (RS) encoder/decoder and convolutional interleaver/deinterleaver. In this paper we propose two types of turbo coded T-DMB system without altering the puncturing procedure and puncturing vectors defined in the standard T-DMB system for compatibility. One(Type 1) can replace the existing RS code, convolutional interleaver and RCPC code by a turbo code and the other one (Type 2) can substitute the existing RCPC code by a turbo code. Simulation results show that two new turbo coded systems are able to yield considerable performance gain after just 2 iterations. Type 2 system is better than type 1 but the amount of performance improvement is small.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.10-16
• /
• 2011

Interleaving is applied to prevent from exceeding the error-correction capability of channel code. At the receiver, burst errors are converted into random errors after deinterleaving, so the error-correction capability of channel code is not exceeded. However, when a receiver does not have any information on parameters used at an interleaver, interleaving can be seen as an encryption with some pattern. In this case, deinterleaving becomes complicated. In the field of blind deinterleaving, there have recently been a number of researches using linearity of linear block code. In spite of those researches, since the linearity is not applicable to a convolutional code, it is difficult to estimate parameters as in a linear block code. In this paper, we propose a method of blind block deinterleaving using convolutional code reconstruction method.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.1-11
• /
• 1997

We developed a base station modulator ASIC for CDMA digital cellular system. In CDMA digital cellular system, the modulation is performed by convolutional encoding and QPSK with spread spectrum. The function blocks of base station modulator are CRC, convolutional encoder, interleaver pseudo-moise scrambler, power control bit puncturing, walsh cover, QPSK, gain controller, combiner and multiplexer. Each function block was designed by the logic synthesis of VHDL codes. The VHDL code was described at register transfer level and the size of code is about 8,000 lines. The circuit simulation and logic simulation were performed by COMPASS tools. The chip (ES-C2212B CMB) contains 25,205 gates and 3 Kbit SRAM, and its chip size is 5.25 mm * 5,45 mm in 0.8 mm CMOS cell-based design technology. It is packaged in 68 pin PLCC and the power dissipation at 10MHz is 300 mW at 5V. The ASIC has been fully tested and successfully working on the CDMA base station system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.611-617
• /
• 2010

In this paper, we investigate the performances of the serial concatenated convolutional codes (SCCC) and low-density parity-check (LDPC) codes on perpendicular magnetic recording (PMR) channels. We discuss the performance of two systems when user bit-densities are 1.7, 2.0, 2.4 and 2.8, respectively. The SCCC system is less complex than LDPC system. The SCCC system consists of recursive systematic convolutional (RSC) codes encoder/decoder, precoder and random interleaver. The decoding algorithm of the SCCC system is the soft message-passing algorithm and the decoding algorithm of the LDPC system is the log domain sum-product algorithm (SPA). When we apply the iterative decoding between channel detector and the error control codes (ECC) decoder, the SCCC system is compatible with the LDPC system even at the high user bit density.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.338-347
• /
• 2015

The multi-carrier transmission signal in Multi-Carrier Code Division Multiple Access (MC-CDMA) has a high peak-to-average power ratio (PAPR), which results in nonlinear distortion and deteriorative system performance. An n-tuple selective mapping method is proposed to reduce the PAPR, in this paper. This method generates $2^n$ sequences of an original data sequence by adding n-tuple of n PAPR control bits to it followed by an interleaver and error-control code (ECC) to reduce its PAPR. The convolutional, Golay, and Hamming codes are used as ECCs in the proposed scheme. The proposed method uses different numbers of the n PAPR control bits to accomplish a noteworthy PAPR reduction and also avoids the need for a side-information transmission. The simulation results authenticate the effectiveness of the proposed method.