• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.167-174
• /
• 2009

This study was conducted to develop an agaricus bisporus washing machine which uses compressed air to remove foreign materials attached on the surface of agaricus bisporus. A prototype of the washing machine was constructed, and performance of removing foreign materials was tested. Research results are as follows: 1. Several transferring methods including PE roller rotation, brush roller rotation, PE screw rotation, vibration plate, and belt conveyor were evaluated. Roller, screw, and vibration methods caused damages on the surface of the products, but belt conveyor method caused the least damages. 2. For air jet, a stationary nozzle type and a rotational type were evaluated. The best air jet nozzle was the jet-type nozzle, and the rotational type was more effective than stationary type nozzle. 3. With the conveyer belt, box type moving method and the rotational air jet nozzle, the washing machine showed the best performance when higher than 5.4${\times}$105 Pa of air jet pressure and lower than 0.047 m/s of moving speed was used. Working performance of the system was 650 kg/h, and the damaging rate was 1.2 %.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.913-920
• /
• 2013

This paper presents an applicable basic design that can configure non-contact levitation table for conveying a large sheet of glass. The suggested air levitation table consists of a series of air chambers with porous pads and fans as the conveyor system. The air supply chambers are arrayed to supply an adequately strong upward airflow for supporting the glass. Levitation is controlled by the size and discharge velocity, of the chamber arrays, as well as the glass supporting height. After pre-evaluation of the glass rigidity and the filer functional performance, a one-way fluid structure interface (FSI) analysis is performed for predicting pressure and deflection working of the 8G glass in the transverse and longitudinal directions, respectively. After comparing calculated levels of flatness of the glass, it determines the chamber array for the linear non-contact conveying motion.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.635-642
• /
• 2013

We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

• 산업공학
• /
• 제20권4호
• /
• pp.438-447
• /
• 2007

This paper presents an aspect-oriented approach to simulation design and analysis in system design phase for integrated logistics system simulation. The integrated logistics system composed of AS/RS (Automated Storages and Retrieval System), AGVs (Automated Guided Vehicle System), STVs (Sorting Transfer Vehicle System) and Conveyor System is designed by using the aspect-oriented approach and UML (Unified Modeling Language). The multi-factorial design of experiments and regression analysis are used for design parameters of the system and Evolution Strategies is used to verify each parameter. Aspect-oriented approach for the integrated logistics system simulation shows the advantages of code reusability, extendible, modulation, easy improvement and a better design technique.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.417-422
• /
• 1998

This paper presents a method of object classification from dynamic image based on fuzzy inference algorithm which is suitable for low speed such as, conveyor, uninhabited transportation. At first, by using feature parameters of moving object, fuzzy if - then rule that can be able to adapt the wide variety of surroundings is developed. Secondly, implication function for fuzzy inference are compared with respect the proposed algorithm. Simulation results are presented to testify the performance and applicability of the proposed system.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권5호
• /
• pp.53-61
• /
• 1997

본 연구에서는 편측식 선형 유도전동기(SLIM)를 구동원으로 한 지상 2차 방식의 반송설비시스템을 실험장치로서 구성하고, 이에 적용된 SLIM의 해석 및 설계을 위하여 Goodness factor와 가동자의 주행패턴을 고려하였다. 또한, 반송설비시스템의 추진구동원에 적용된 SLIM의 설계에 대한 타당성을 고찰하고자 유한요소법(FEM)에 의한 해석결과와 실험결과를 비교·분석하였으며, 이로부터 반송설비시스템은 물론 산업용 제어기기에 이르기까지 SLIM의 응용을 위한 기초자료를 제시할 수 있었다.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 1998년도 추계학술발표논문집
• /
• pp.338-343
• /
• 1998

본 논문에서는 클라이언트/서버 형태로 컨베이어 시스템을 원격으로 제어하는 방법을 제시하고 있다. 이러한 시스템의 구성은 근거리통신망으로 원격지에 연결된 컨베이어 시스템을 상황실에서 제어하는 형태를 가진다. 서버 시스템에서는 컨베이어 시스템을 통과하는 생산품 내역에 대한 데이터 베이스를 저장, 유지, 관리한다. 또한 컨베이어 시스템을 제어하는 프로그램을 수행시킨다. 컨베이어 시스템은 승용차 조립라인을 모델링한 시스템으로 구성되어 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.211-215
• /
• 1989

This paper describes a dynamic robotic assembly system in which an industrial robot executes peg-in-hole task in a moving state. As an effective means to synchronize the end-effector of the robot with the moving conveyor this work uses a control algorithm which is essentially a PID position control scheme combined with velocity feedforward loop. A RCC wrist is used for the inserting task and its force responses are investigated for various tracking conditions and inserting velocities through a series of experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.133-138
• /
• 1997

Belt-conveyer driving systems, which transport coal stored in the yard of a coal-fired fossil power plant to coal silos, experienced severe vibrations. From measurement, it was found that the vibrations showed beating phenomenoa and arose from hydraulic couplings installed between motors and gear boxes. In the present paper, described are results of case studies on vibration troubleshooting for the belt-conveyor driving systems: 1)resonance of the system; 2)field balancing.