• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.214-220
• /
• 2019

The calibration method of the initial value error obtained in the weight measurement through anchor bolt type strain gauge sensor is proposed. The strain gauge sensor is developed for preventing the overturning of forklift, which is the most frequent type of safety-accident in industry. It was confirmed that the initial value error is caused from the physical and mechanical error of anchor bolt, and the environmental problem. Since the elimination of these causes falls outside the realm of this research, we find out the calibrated values based on all the causes, and we adjust the initial values of analog-to-digital convertor (ADC) module consisted of strain gauge sensor block using the calibrated values. We use the linear interpolation method for our calibration. We confirm that four sensor modules have the different under 5% between the real weight and the measured value in the experiment applied with the calibration of initial values. The low correlation between the real weights and ADC values is also improved through the proposed calibration.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.293-296
• /
• 2002

UP Link is One of the commercial product which converts HTML to HDML convertor in order to show the internet www contents in the mobile environments. When UP browser accesses HTML pages, the agent in the UP Link controls the converter to change the HTML to the HDML, I-Mode, which is developed by NTT-Docomo of Japan, has many contents through the long and stable commercial service. Micro Explorer, which is developed by Stinger project, also has many additional function. In this paper, we designed and implemented WAP convertor which can accept C-HTML contents and mHTML contents. C-HTML format by I-Mode is a subset of HTML format, mHTML format by ME is similar to C-HTML, So the content provides can easily develop C-HTML contents compared with WAP and the other case. Since C-HTML, mHTML and WML are used under the mobile environment, the limited transmission capacity of one page is also similar. In order to make a match table. After that, we apply conversion algorithm on it. If we can not find matched element, we arrange some tags which only can be supported by WML to display in the best shape. By the result, we can convert over 90% contents.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.135-136
• /
• 2008

본 연구에서는 USB(Universal Serial Bus)통신과 전기적 절연을 이용하여 생체신호계측이 가능한 USB 데이터 수집(DAQ, Data acquisition)보드를 설계 및 구현한 것이다. 대부분의 데이터 수집보드는 전기적 절연이 되어 있지 않기 때문에 의용계측에 있어서 적합하지 않다. 보드를 평가하기 위해 설계한 USB DAQ 보드와 PC를 사용하여 사인파와 램프신호 그리고 생체신호중 하나인 ECG 신호를 측정하였다. 제안한 USB 데이터 수집보드는 AD변환부, 전기적 절연부, 전송부, 디지털 입 출력부 그리고 DC-DC변환기(DC DC Convertor)로 구성되었고, 최대 1KHz의 샘플링 주파수와 12비트 분해능과 8채널의 성능을 가진다.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.183-186
• /
• 2004

The proposed system in this paper utilizes the SIP and self-defined control protocol to provide global wireless communication over the data link of Orbcomm system. Main processor board connected to Orbcomm communication subscriber is designed to interface with digital I/O and AD/DA convertor for various application of control and .measurement. Hardware system implemented in this paper also includes the function of real-time clock and position report using GPS receiver The experimental result of the proposed global wireless communication system is evaluated via real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.387-400
• /
• 2017

A new junction-splitting based SAR ADC with a redundant searching capacitor array structure in $0.13{\mu}m$ CMOS process to alleviate capacitor mismatch effects, is presented. The normalized average power has a factor of 0.35 to the conventional SAR ADC at 10-bit conversion accuracy. Statistical experiments show the number of missing codes resulting from the mismatch reduces by 95% for 3% unit-capacitor mismatch ratio, while keeping the conversion energy to that of the conventional JS capacitor array.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.562-570
• /
• 2002

The Purpose of this paper is to design and manufacture an educational system in order to demonstrate the causes and effects of electromagnetic induction.'rho educational system described in this study is a "jumping ring apparatus". This system demonstrates the principle of electromagnetic induction, a force from AC sources, Lenz's law of repulsion and transformer. The educational system is composed of a jumping ring apparatus, a sensor array, encoder, A/D converter, D/A converter and nonlinear controller. The educational system is controlled by 586 PC using Turbo C program. The sensor array is composed of 20 optical sensors. The nonlinear controller consists of nonlinear control algorithm and control board included SCR, FET and phase controller. The A/D converter is used to show the height of ring position to analog for an education purpose. The control signal calculated from the nonlinear control of algorithm send control board through 8 bit D/A convertor. Experiment results are given to verify that Proposed nonlinear controller is useful in on line control of the educational system.al system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.196-205
• /
• 2004

Although many papers about the interleaved boost converter(IBC) have been published, there are, unfortunately, no analytical and rigorous expressions for steady-state operation of the N-phase IBC. To understand the operating characteristics of the N-phase IBC, the averaged state equation and the general steady-state solutions are derived in this paper. The general expressions of the current unbalance due to the parameter mismatch, the inductor and input current ripples, and the output voltage ripple are also presented. Through the analytical expressions presented, the steady-state characteristics of the N-phase IBC are analyzed theoretically and verified experimentally.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.564-566
• /
• 1996

New simple control method of power factor correcting(PFC) boost convertor without instantaneous measurement of input current is proposed. Using the averaged model, the power factor correction scheme is presented. With the measurements of input voltage and output voltage, the control signal is generated to make the shape of the line current same as the input voltage. The validity of the controller is verified through the computer simulations.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.447-449
• /
• 1996

The main objective of this paper is to increase the efficiency, to eliminate the harmonics wave and to acomplish the zero voltage regulation of the output voltage. To accomplish the goal, DC-to-DC converter model with ERS(Energy Recovery Snubber) is developed. And, to realize the detail purpose, we are used ZVS soft switching snubber, ripple steering filter and, function control law etc.. So, we presented to show superior operation of this convertor with the zero voltage regulation function.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.177-180
• /
• 2003

본 논문에서는 dc-dc convertor의 진단을 위해 buck 컨버터의 등가 모델을 가정하고 주요 파라메터를 시스템 식별 기법을 통해 추정하였으며 추정된 결과가 실제 시스템의 특성을 충실히 반영하는지를 계측기를 통한 주파수 응답 측정 결과와 비교하여 검증하였다. dc-dc 컨버터의 모델 파라메터 추정을 통해 주요 진단지수를 계산할 수 있으며 진단 지수를 이용하여 시스템의 열화 여부를 판단할 수 있음을 확인 하였다.