• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.946-947
• /
• 2008

시스템 에어컨은 가정이나 사무실에서 하나의 실외기를 사용하면서, 각 방 또는 사무실에 여러 대의 실내기를 사용하는 에어컨 방식이다. 시스템 에어컨은 가정이나 사무실에 사용하는 가장 큰 에너지 부하 중 하나 로서 점차 그 사용이 증대되고 있다. 본 논문에서는 이 시스템 에어컨에 사용되는 컨버터 인버터 시스템의 컨버터 초기 운전 방법을 제안한다. 본 방법은 컨버터 운전 초기에 발생할 수 있는 제어 전압 부족으로 인해 발생할 수 있는 과전류를 미리 방지하여 컨버터 보호 및 비정상적 운전을 방지할 수 있는 방법이다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1138-1139
• /
• 2008

LLC 하프브리지 공진형 컨버터는 세 개의 공진소자인 누설 인덕턴스, 자화인덕턴스, 공진 커페시터를 이용하여 영전압 스위칭을 실현 할 수 있고 낮은 전압, 전류 스트레스와 높은 효율을 기대할 수 있기 때문에 밀폐된 공간에서 동작해야하는 LED 전원장치로 적합하다. 특히 이동성의 편의를 위해 높은 전력밀도를 가져야 하는데 LLC 공진형 컨버터는 출력단에 인덕터가 없기 때문에 크기 면에서도 장점을 갖고 있다. 본 눈문에서는 LED 전원공급용 컨트롤기어인 LLC 하프브리지 컨버터의 최적설계를 반영한 이론적 해석 및 시뮬레이션을 하여 시 제작한 컨버터의 특성을 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1142-1143
• /
• 2008

As well known, the maximum power point tracking (MPPT) is an important role in photovoltaic (PV) power systems. MPPT finds and maintains the operation of PV at the maximum power point when the irradiation and cell-temperature change. In this paper, the studied system includes a PV array, a Buck-Boost DC/DC converter, a DC/AC inverter and it is connected to the three phase power system. The solar array operates as a non-linear voltage source. The P&O algorithm with power feed-back is used to control the operating point of PV array at the maximum power point. The effects of irradiation and cell-temperature on the dynamic responses are also considered.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.171-174
• /
• 2008

In this paper, interactive inverter in series 2 module inverters is proposed. One of two inverters makes equivalent voltage. Another removes harmonics, contained in source voltage, through control inductor current. As a result, it remains only basic frequency voltage to produce the purely sinusoidal current wave. Using 2 module inverters is verified with simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.593-597
• /
• 2002

The power conversion system for Fuel Cell Electric Vehicle(FCEV), technical trend, and a various type of Fuel Cell and its characteristics are presented. Especially, this paper is focused on the control methods of power conversion devices applied for the Fuel Cell Electric Vehicle, configuration of power system and operation mode of the bidirectional DC/DC converter. The prevalent topology for the power conversion systems, simulation results and development a tendency of FCEV and it's market investigations are introduced.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.216-218
• /
• 2006

본 논문에서는 연료전지용 듀얼 부스트 컨버터의 전압제어루프의 피드백 루프에 디지털 필터를 도입하여 부하에 의해 발생하는 출력전압의 저고조파 리플성분을 제거한 측정값을 사용함으로써 입력전류의 저고조파 리플을 제거하고, 전류제어루프에 predictive deadbeat 제어기법을 적용하여 제어주기와 제어알고리듬 계산에 의한 시간적 지연에 의해 발생되는 동적응답특성의 저하를 최소화한다. 센서를 사용하는 대신 연료전지 스택에 공급되는 수소와 공기의 압력과 스택의 출력전류에 결정되는 연료전지의 전압-전류 특성곡선을 이용하여 부스터 컨버터의 입력전압을 계산하고 전류를 제어함으로써 연료전지 시스템의 성능을 최적화한다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.639-643
• /
• 2003

We are interested in this paper on the control of an electromechanical system consisting of a doubly-fed induction generator(DFIG), driven by a prime mover that can supply or extract mechanical power, e.g., a flywheel inertia, and an induction motor(IM). The stator of the Induction machine is connected to the stator of the generator whose rotor voltage is regulated by a bidirectional converter. The main interest of this configuration is that it permits a bidirectional power flow between the motor, which may operate in regenerative mode, and the generator We propose a passivity-based controller to regulate the motor mechanical speed. Since this kind of controllers achieve stabilization via energy balancing, regulation of the power flow in the system is naturally incorporated. Simulation results are presented to illustrate the main points of our paper.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.145-148
• /
• 2003

This paper describes a new notches generator for the test of custom power devices such as UPS, DVR, Active Power Filter, etc. The magnitude, width, polarity, and position of the notches generated by the proposed scheme can be varied with simple control. The scheme has good features of simple structure, high reliability, and the capability of arbitrary several notches generation. The circuit operation is described and the usefulness of the scheme is verified through simulations.