• 대한공간정보학회지
• /
• 제17권4호
• /
• pp.3-11
• /
• 2009

최근 들어 다양한 분야에서 개방형 라이브러리가 개발되어 온라인상으로 배포되고 있으며, 사용자들은 이러한 오픈소스를 활용할 경우 최소한의 노력으로 요구되는 응용프로그램을 신속하게 개발할 수 있다. 그러나 배포되는 오픈소스를 활용하기 위해서는 사용목적에 맞게 커스터마이징 공정이 요구된다. 본 연구에서는 최근 국내에서 세계 측지계의 변환작업이 활발히 진행되는 상황에서 좌표계변환을 위해 개발된 오픈소스 Proj4를 기반으로 소프트웨어를 개발하고, 이를 국토지리정보원에서 개발한 NGI Pro 소프트웨어와 비교 평가하였다. 그 결과 약간의 변환과정 만으로 국내에서 활용 가능한 좌표변환모듈의 개발이 가능하였으며, 좌표계변환을 요구하는 분야 뿐 만 아니라 다양한 응용프로그램에 개방형 라이브러리를 활용하는 것이 효과적임을 알 수 있었다.

• 한국항행학회논문지
• /
• 제10권2호
• /
• pp.138-144
• /
• 2006

본 논문에서는 와이브로와 무선랜 응용을 위한 이중 모우드 FET 믹서를 단일 게이트의 두 개 pHEMT를 캐스코드(cascode)로 연결하여 이중게이트 FET 믹서 형태로 구현하였다. 설계된 이중게이트 믹서는 와이브로와 무선랜 응용에서 DC 전력소모를 최소화하기위해 가변적인 변환이득을 갖도록 최적화되었다. 설계 믹서의 LO-RF간 격리도 특성은 2.3GHz~2.5GHz에서 약 20dB이다. LO신호가 0dBm이고 RF신호가 -50dBm일 때 믹서는 15dB의 변환이득을 갖는다. 수신되는 RF신호가 -50dBm에서 -20dBm까지 증가할 때 변환이득은 15dB에서 -2dB까지 바이어스에 따라 감소하게 된다. 가변 변환이득은 몇 가지 장점이 있다. 즉 IF단에서 AGC의 넓은 동작영역의 부담을 줄일 수 있고, 또한 믹서의 DC전력소모를 약 90% 절약할 수 있다.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.379-385
• /
• 2011

This paper presents an optimal design of a direct-drive permanent magnet synchronous generator for a small-scale wind energy conversion system. An analytical model of a small-scale grid-connected wind energy conversion system is presented, and the effects of generator design parameters on the payback period of the system are investigated. An optimization procedure based on genetic algorithm method is then employed to optimize four design parameters of the generator for use in a region with relatively low wind-speed. The aim of optimization is minimizing the payback period of the initial investment on wind energy conversion systems for residential applications. This makes the use of these systems more economical and appealing. Finite element method is employed to evaluate the performance of the optimized generator. The results obtained from finite element analysis are close to those achieved by analytical model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.113-114
• /
• 2006

In this paper, dual-gate mixer has been designed and optimized to have variable conversion gain for WiBro and WLAN applications and to save power. With the LO power of 0dBm and RF power of -50dBm, the mixer shows 15dB conversion gain. When RF power increases from -50dBm to -20dBm, the conversion gain decreases to -2dB with bias change. The variable conversion gain can reduce the high dynamic range requirement of AGC burden at IF stage. Also, it can save the dc power dissipation of mixer up to 90%.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.30-36
• /
• 2018

The high rate of corrosion of magnesium alloys makes it limited for industrial applications. Therefore, surface treatment is required to enhance their corrosion resistance. In our study, a chemical conversion coating for protecting the corrosion of the magnesium alloy, AZ31B, was prepared by using a phosphate-permanganate solution. The chemical conversion coating had a limited protection ability due to defects arising from cracks and pores in the coating layer. The sol-gel coating was prepared by using trimethoxymethylsilane (MTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) as precursors, and aluminum acetyl acetonate as a ring opening agent. The corrosion protection properties of sol-gel and conversion coatings in 0.35wt% NaCl solution were measured by the electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test. The EIS results indicated that the resistance of the chemical conversion coating with the sol-gel coating was significantly improved through the sol-gel sealed phosphate-permanganate conversion coating. The results of the potentiodynamic polarization test revealed that the sol-gel coating decreased the corrosion current density ($I_{corr}$). The SEM image showed that the sol-gel coating sealed conversion coating and improved corrosion protection.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.34-40
• /
• 2012

In this paper, voltage clamped tapped-inductor boost converter with high voltage conversion ratio is proposed. The conventional tapped-inductor boost converter has a serious drawback such as high voltage stresses across all power semiconductors due to the high resonant voltage caused by the leakage inductor of tapped inductor. Therefore, the dissipative snubber is essential for absorbing this resonant voltage, which could degrade the overall power conversion efficiency. To overcome these drawbacks, the proposed converter employs a voltage clamping capacitor instead of the dissipative snubber. Therefore, the voltage stresses of all power semiconductors are not only clamped as the output voltage but the power conversion efficiency can also be considerably improved. Moreover, since the energy stored in the clamp capacitor is transferred to the output side together with the input energy, the proposed converter can achieve the higher voltage conversion ratio than the conventional tapped-inductor boost converter. Therefore, the proposed converter is expected to be well suited to various applications demanding the high efficiency and high voltage conversion ratio. To confirm the validity of the proposed circuit, the theoretical analysis and experimental results of the proposed converter are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3455-3474
• /
• 2018

As a unique form of signed-digit representation, non-adjacent form (NAF) minimizes Hamming weight by removing a stream of non-zero bits from the binary representation of positive integer. Thanks to this strong point, NAF has been used in various applications such as cryptography, packet filtering and so on. In this paper, to improve the NAF conversion speed of the $NAF_w$ algorithm, we propose a new NAF conversion algorithm, called w-bit Shifting Non-Adjacent Form($SNAF_w$), where w is width of scanning window. By skipping some unnecessary bit comparisons, the proposed algorithm improves the NAF conversion speed of the $NAF_w$ algorithm. To verify the excellence of the $SNAF_w$ algorithm, the $NAF_w$ algorithm and the $SNAF_w$ algorithm are implemented in the 8-bit microprocessor ATmega128. By measuring CPU cycle counter for the NAF conversion under various input patterns, we show that the $SNAF_2$ algorithm not only increases the NAF conversion speed by 24% on average but also reduces deviation in the NAF conversion time for each input pattern by 36%, compared to the $NAF_2$ algorithm. In addition, we show that $SNAF_w$ algorithm is always faster than $NAF_w$ algorithm, regardless of the size of w.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.669-674
• /
• 2012

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of $B_2O_3$-ZnO-$SiO_2$-CaO and, in the XRD results, new crystalline peaks of $BaSi_2O_5$ appeared in the color conversion glass with major components of $Bi_2O_3$-ZnO-$B_2O_3$-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1086-1092
• /
• 2009

Stereoscopic conversion has been an important and challenging issue for many 3-D video applications. Usually, there are two different stereoscopic conversion approaches, i.e., image motion-based conversion that uses motion information and object-based conversion that partitions an image into moving or static foreground object(s) and background and then converts the foreground in a stereoscopic object. As well, since the input sequence is MPEG-1/2 compressed video, motion data stored in compressed bitstream are often unreliable and thus the image motion-based conversion might fail. To solve this problem, we present the utilization of key-motion that has the better accuracy of estimated or extracted motion information. To deal with diverse motion types, a transform space produced from motion vectors and color differences is introduced. A key-motion is determined from the transform space and its associated stereoscopic image is generated. Experimental results validate effectiveness and robustness of the proposed method.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권8호
• /
• pp.287-296
• /
• 2018

최근 상용 DBMS 시장은 고가의 라이선스 정책과 신속하지 않은 기술 지원 서비스 등에 대한 사용자들의 부담과 불만이 커지면서, 호환성이나 안정성에 문제가 없는 오픈소스 DBMS의 사용에 대한 관심이 확대되고 있다. 이로 인해 DBMS 시장의 약 60% 점유율을 갖고 있는 오라클사 기반의 응용프로그램을 오픈소스 기반의 DBMS로 전환하여 비용을 절감하는 사례가 많아지고 있다. 그러나 오라클사에서 제공하는 PL/SQL의 사용으로 인한 비호환적 문장을 오픈소스 DBMS로 전환 시, 많은 수작업을 동반하게 되어 시간 및 비용 손실이 크다. 따라서 PL/SQL을 표준 SQL로 자동 전환해주는 도구가 요구된다. 제안하는 응용프로그램 전환을 위한 자동화 도구는 PL/SQL을 ANSI 표준 프로그래밍 언어인 Java SP (Stored Procedure)로 전환한다. 자동화 도구 테스트 실행을 통해 입출력 데이터의 동일성을 확인하고, 발생하는 Java SP 전환 오류 수정으로 신뢰성을 검증하여 응용프로그램 전환의 시간과 비용 절감에 기여할 수 있다는 것을 확인했다.