• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1053-1065
• /
• 2019

Land use statistics calculation is very informative data as the activity data for calculating exact carbon absorption and emission in post-2020. To effective interpretation by land use category, This study classify automatically image interpretation by land use category applying forest aerial photography (FAP) to deep learning model and calculate national unit statistics. Dataset (DS) applied deep learning is divided into training dataset (training DS) and test dataset (test DS) by extracting image of FAP based national forest resource inventory permanent sample plot location. Training DS give label to image by definition of land use category and learn and verify deep learning model. When verified deep learning model, training accuracy of model is highest at epoch 1,500 with about 89%. As a result of applying the trained deep learning model to test DS, interpretation classification accuracy of image label was about 90%. When the estimating area of classification by category using sampling method and compare to national statistics, consistency also very high, so it judged that it is enough to be used for activity data of national GHG (Greenhouse Gas) inventory report of LULUCF sector in the future.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.199-210
• /
• 2011

The cables in cable-stayed bridges are under high stress and are very sensitive to vibration due to their small section areas compared with other members. Therefore, it is reasonable to evaluate the cable impact factor by taking into account the dynamic effect due to moving-vehicle motion. In this study, the cable impact factors were evaluated via moving-vehicle-load analysis, considering the design parameters, i.e., vehicle weight, cable model, road surface roughness, vehicle speed, longitudinal distance between vehicles. For this purpose, two steel composite cable-stayed bridges with 230- and 540-m main spans were selected. The results of the analysis were then compared with those of the influence line method that is currently being used in design practice. The road surface roughness was randomly generated based on ISO 8608, and the convergence of impact factors according to the number of generated road surfaces was evaluated to improve the reliability of the results. A9-d.o.f. tractor-trailer vehicle was used, and the vehicle motion was derived from Lagrange's equation. 3D finite element models for the selected cable-stayed bridges were constructed with truss elements having equivalent moduli for the cables, and with beam elements for the girders and the pylons. The direct integration method was used for the analysis of the bridge-vehicle interaction, and the analysis was conducted iteratively until the displacement error rate of the bridge was within the specified tolerance. It was acknowledged that the influence line method, which cannot consider the dynamic effect due to moving-vehicle motion, could underestimate the impact factors of the end-cables at the side spans, unlike moving-vehicle-load analysis.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.75-81
• /
• 2016

Future electronics such as electronic paper and foldable cellphone are required to be flexible and transparent and should have a high performance. In order to fabricate the flexible electronics using flexibility transfer process, techniques for transferring various devices from rigid substrate onto flexible substrate by elastomeric stamp, have been developed. Adhesion between the elastomeric stamp and various devices is crucial for successful transfer process. The adhesion can be controlled by the thickness of the stamp, separation velocity, contact load, and stamp surface treatment. In this study, we fabricated the bump shape stamp consisting of a UV-curable polymer and investigated the effects of curing condition, separation velocity, and contact load on the adhesion characteristics of bumps. The bumps with hemispherical shape were fabricated using a dispensing process, which is one of the ink-jet printing techniques. Curing conditions of the bumps were controlled by the amount of UV irradiation energy. The adhesion characteristics of bumps are evaluated by adhesion test. The results show that the pull-off forces of bumps were increased and decreased as UV irradiation energy increased. For UV irradiation energies of 300 and 500 mJ/cm², the pull-off forces were increased as the separation velocity increased. The pull-off forces also increased with the increase of contact load. In the case of UV irradiation energy above 600 mJ/cm², however, the pull-off forces were not changed. Therefore, we believe that the bump shape stamp can be applied to roll-based transfer process and selective transfer process as an elastomeric stamp.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.221-226
• /
• 2016

Production of eco-friendly and biologically harmless materials is strongly required in all industries. In particular, reducing volatile organic compounds in coating processes is extremely important to secure worker's safety. During recent two decades, extensive research works on water-borne polyurethane dispersion (PUD) have been continuously developed as an alternative to solvent-borne polyurethane. However, PUD was shown inferior mechanical properties to the organic solvent-borne polyurethane due to a limit to the molecular weight increase, which resulted in the limit of applications. To overcome this drawback, several approaches have been examined such as polymer blends and thermal/radiation induced crosslinking. Among these methods, the radiation curing system was suitable for industrialization because of the high crosslinking density and fast curing speed. In this study, we overcame the drawback for PUD via introducing benzophenone radiation curable units to PUD. We synthesized PUD films which possessed good dispersion in water for 30 days, increased Tg and Td more than $5^{\circ}C$ after UV curing film as well as improved young's modulus more than double.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.06a
• /
• pp.46-66
• /
• 2006

새로운 지능기반사회(ubiquitous society) 패러다임이란 전제 아래 미국을 비롯해 일본, 유럽 등 세계 각국에서는 모바일, 브로드밴드, 극소형 컴퓨터, IPv6의 기술이 창출해 내는 컴퓨팅 혁명의 실체를 유비궈터스 IT로 파악하고 각 국의 걸부, 기업, 연구소들이 주도권을 잡기 위해 많은 노력을 기울이고 있다. 현재 유비쿼터스 IT를 활용한 u-비즈니스를 활성화하고 관련 시장을 선점하기 위한 전 세계적인 경쟁은 매우 치열한 양상을 보이고 있다. 주요 국가들은 서로 지향하는 영역은 다르지만 궁극적으로 지능기반사회 구현이라는 대명제 아래 독자적인 산업 구축을 위해 노력하고 있다. 이러한 이유는 기본적으로 지능기반사회로의 이행과정에서 발생하는 경제적 파급효과, 예컨대 디지털 가전, 이동통신기기, 전자의료기기, 디스플레이, 2차 전지, 보안 등 관련 산업에 미치는 영향 및 새로운 시장 창출의 기회가 있기 때문이다. 기존의 많은 연구 및 문헌에서는 아직도 유비쿼터스 IT에 대한 개념적인 논의에 치중되어 있고 시장 중심적 또는 수요자 중심적 사고의 논의가 부족하다. 성공적으로 유비쿼터스 산업을 육성하기 위해서는 유비쿼터스 IT자체기술 개발사업(tangible service) 뿐만 아니라 비가시적(intangible) 서비스, 그리고 컨버전스(convergence) 서비스에 대한 상용화 모델과 성공적 사업 전개 방법론에 대한 깊은 연구가 수행되어야 한다. 본 연구에서는 먼저 유비쿼터스 IT의 기술동향과 시장 동향 및 산업 규모에 대한 문헌연구를 통해 u-비즈니스의 가능성을 고찰해보고, u-비즈니스 추진 전략을 탐색적으로 제시하고자 한다.되었다. SPME-GC/MS에 의한 휘발성분 분석 결과, 기능성 유지에서 홍국쌀 에탄올 추출물로부터 기인되는 특유의 휘발성분은 관찰되지 않았으나, RT=12.1 min인 hexanal의 함량이 control에 비하여 유의적인 감소 경향을 나타내는 것이 확인되었다(p<0.05).히지 못하여, 이의 기전을 밝히기 위한 추후 연구가 필요하다./TEX>로서 p<0.01 수준에서 현저히 증가하였다. 혈청의 인지질과 콜레스테롤 에스테르의 지방산 조성에서 vitamin C를 혼합 투여한 3,5,7군에서 PUFA 함량이 증가한 반면, SFA 함량은 감소하여 P/S 비율, n-3P/n-6P 비율은 증가하는 경향이었으며 이는 간장의 인지질, 콜레스테롤 에스테르, 총 지질의 지방산조성에서도 같은 경향을 볼 수 있었다.X>$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Resources Recycling
• /
• v.29 no.5
• /
• pp.38-47
• /
• 2020

In this study, factors affecting the adsorption reaction for the separation/recovery of V and W using Lewatit monoplus MP 600, a strong basic anion exchange resin, from the leachate obtained through the soda roasting-water leaching process from the spent SCR DeNO_X catalyst investigated and the adsorption mechanism was discussed based on the results. In the case of the mixed solution of V and W, both ions showed a high adsorption ratio at pH 2-6, but the adsorption of W was greatly reduced at pH 8. In the adsorption isothermal experiment, both V and W were fitted well at the Langmuir adsorption isotherm, and the reaction kinetics were fitted well at pseudo-second-order. As a result of conducting an adsorption experiment by adjusting the pH with H₂SO₄ to remove Si, which inhibits the adsorption of V and W from the leachate, the lowest W adsorption ratio was shown at pH 8.5. Desorption of W was hardly achieved in strongly acidic solutions, and desorption of V was well performed in both strongly acidic and strongly basic solutions.

• Cross-Cultural Studies
• /
• v.25
• /
• pp.453-482
• /
• 2011

Until now and in the studying of fantastic literature, there has been likely to regard the character as secondary element, compared to their actions. However, it has to be recognized that the characters is a barometer to divide the boundary among the marvellous literature, or fantasy, magic realism, etc., in particular it is an important narrative element to understand an epistemological vision of fantastic literature. This thesis analyzes the characters, focusing on two dimensions divided such as between protagonist/antagonist and protagonist narrator/editor narrator. The characters in fantastic literature are usually set-up as people like ourselves, because it is necessary for the readers to consider the supernatural phenomenon as real world situation. The reason why many characters in fantastic literature usually meet a tragic end is that the structure of fantastic literature embedded unresolved supernatural confusion into ordinary order in the end, while antagonists are viewed as holders of extraordinariness and they are far from vero-similarity. Together with usual characters who represent the world of logic and reason, antagonists who seek to understand more about the universe totally and thus regarded as symbols of intuition and imagination and ultimately are the elements of fantastic literature. On the other hand, the "first person narrator" is divided between "protagonist narrator" who narrates the supernatural things through his/her own experience to readers and "editor narrator" who narrates the other's experiences. Particularly in the case of "editor narrator", he/she may narrates the stories with different explication and angle, which lead to hesitation and confusion for readers to identify between reality and unreality or natural logic and supernatural one. Even though there are various categories in fantastic literature, this thesis exclude 'neo fantastic', 'metaphysical fantastic' ones, characterized as a possibility of convergence with the secondary interpretation and symbolic implication. Beyond these materials, the literatures which involved with this thesis and analysis are normally related with traditional fantastic literary works which supernatural events intervene in real world and bring out collision between real and unreal, or natural and supernatural logics. Based on this criteria, this thesis chooses literary works such as "De los Reyes Futuros", "El Perjurio de la Nieve" written by Adolfo Bioy Casares who is a representative author in Latin American fantastic literature.

• Journal of Legislation Research
• /
• no.44
• /
• pp.7-31
• /
• 2013

Paradigm of Global economy is changing to creative economy. This study focuses on the role of creative economy to clarify (understand clearly) the impact (influence) which transition of economy system will bring about. The creative economy is basically came from New economy theory. According to the New economy theory, a state can achieve sustainable growth without an inflation, or higher growth rate under given inflation rate, through an investment on ICT. However, different from America, Korea had limited effect of New Economy. This is because Korean economy had factor-input driven growth model rather than New Economy mechanism. However, ICT is essential requirement to move toward New Economy(Digital Economy), it does not sufficiently explain the increase of productivity and economic growth. A crucial point to realize New economy is how to diffuse and spill over the technology development on ICT sector to other industry. ICT is not creative industry or creative economy per se, and it should play as an enabler to improve other industry's productivity. The creative economy can be understood as an extension of New Economy theory. It means the economy that creates values by cultural assets and human resource, as well as capital and labor factors. However, if we understand the meaning of creative economy as change of input factors, it is hard to bring real shape of creative economy.

• International Area Studies Review
• /
• v.21 no.2
• /
• pp.71-96
• /
• 2017

This study analyzes the process of overcoming the impoverishment due to the failure of North Korea planned economy through marketization. Recognizing the economic policy presented by the convergence of market and planned economy system as a economy system and focusing on the 7.1 Economic Management Measures and the 6.28 New Economic Management Measures. The marketization is classified the indigenous marketization (1990-2001), the marketization focusing on central distribution (2002-2011), the marketization focusing on production (2012-2017). The major events, the economic circular structure and the economic behavior were analyzed. Results showed as following: First, through the process of marketization starting from the expansion of farmers' market and the marketization focusing on distribution, the marketization focusing on production to the marketization focusing on finance. And as the evolution of it continues, to some extent a poverty has been overcomed. Second, corporate institutions, agricultural institutions, financial institutions and progress in becoming a market economy direction. A series of privatization starting from small one to large-scale one have been progressing. Third, in order to overcome the impoverishment completely. Through foreign investment the industrialization covering a wide range of industries are urgently needed, Domestic agricultural reform, enterprise reform, price reform, financial reform, financial reform, trade and direct investment, reform, reform, distribution, etc are needed. The economic reforms across almost all sectors are needed to be combined in a global economy Expanding employment, the acquisition of foreign currencies and the acquisition of technology in the process should also be realized. The direction of change of this series of economic structures has turned Public sector and centralized into Private sector and Decentralization.