• Journal of Industrial Convergence
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2004

The ratio of industrial injury in Korea is higher 2~4 times than advanced nations like Japan and Singapore, because the industrial injuries in small-medium industry are higher than large size industry. The investment ability is insufficient for working conditions and prevention of the industrial injuries in the small & medium industry. The industrial safety management of machinery manufacturing for transportation, chemical factory, textile product manufacturing, wire & circuit products for computer, plastic goods manufacturing, and metal products manufacturing was investigated. Therefore, the purpose of the paper is to recognize the seriousness of the industrial injuries, understand product, layout, and machinery, and working conditions, etc., and indicate safety engineering techniques for improvement of quality and productivity under this safety working conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.609-615
• /
• 2021

Chemical accidents can happen anywhere in the world. To prevent chemical accidents, Korea introduced the Chemicals Control Act. However, Small and medium-sized businesses do not meet these regulations. Accordingly, the Ministry of Environment is providing a chemical safety management support project for Small and medium-sized businesses. However, there are many small and medium-sized businesses, and businesses that need support need priority. In this study, the risk of the plants was classified into hig h, medium, and low risk based on four methods. As a result, out of 90 plants subject to the study, high risk was 30% and medium risk was 70%. The industries with the high risk were chemical products manufacturing and paint manufacturing. The plating and printing industries showed relatively medium risk. This risk classification has the advantage that it can obtain intuitive and quick results. These studies can be used as basic data for chemical safety management of local governments and Ministry of Environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.979-986
• /
• 2022

Chemical accidents are increasing day by day as the industry develops. To prevent such chemical accidents, Korea enacted the Chemicals Control Act. Through these laws, systematic management of chemical substances began. There are various positions in the companies. hazardous chemical supervisors, equipment and technical human, operators and employees. Chemicals-related education for each position should be provided. As a result of the survey, hazardous chemical supervisors and equipment and technical human liked the overall content of the Chemicals Control Act and the education subject on safety management standards for facilities. Conversely, the operators liked the course on how to wear personal protective equipment. The employees preferred subjects such as classification of chemical substances and prevention of chemical accidents. Currently, various modular textbooks are widely available. Rather than general education, it is necessary to select and provide customized subjects that are preferred and interested according to the position. Then it will be more effective in understanding harzardous chemical substances and in preventing chemical accidents.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.3
• /
• pp.45-51
• /
• 2011

During disaster response, prioritization of limited resources is one of the most important but challenging tasks. At the same time, it is imperative to timely provide to the rescuers with the adequate heavy equipment to facilitate lifesaving operations. However, supply of high demand equipment is usually insufficient during the initial phase of disaster response, challenging lifesaving operations. At the same time, resources outside of the disaster affected zone converge into the area to assist the response efforts, which is the effect of convergence that often made resource coordination challenging in large scale disasters. Meanwhile, the initial condition of the disaster is usually best known by civilians already at the area before and during impact of the disaster. The knowledge of the civilians is not always received and considered by the responding organizations. With the help of these civilians, critical information such as victim location, infrastructure damage, and risk condition could be better know before any response actions are taken. To efficiently collect information and utilize the converging resources, this paper proposes a geospatial information repository for initial condition reporting and update to guide search and rescue operations and deployment of equipment with safety considerations for the rescuers in large scale disaster response scenarios.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.71-77
• /
• 2022

In times of war or emergencies, weapon systems, such as radars, must receive stable power. This can be achieved using improved onboard portable power systems made of steel containers. However, a breakdown can occur in the event of random vibration during transportation via a vehicle or train. Electrical-power shortages or restrictions pose a significant threat to security. In this study, Composite Wheeled Vehicle(CWV) data and rail cargo data with Acceleration Spectral Density(ASD), specified in MIL-STD-810H METHOD 514.8, were interpreted as input data of the three-axis random vibration method using ANSYS 19.2. Modal analysis was performed up to 500 Hz, and deformations in modes 1 to 117 were calculated to utilize all ASD data. The maximum equivalent stress in the three-axis direction was obtained using a random vibration analysis. Similarly, the margin of safety was calculated using the derived equivalent stress and material properties. Overall, the analysis verified that the portable container designed for the power supply system satisfied the required vibration demands.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.126-131
• /
• 2017

This paper designs a smart safety measurement system with Bluetooth beacon sensor nodes that can provide risk detection and evacuation/countermeasure services. The Bluetooth beacon sensor nodes is easily able to be attached to old building wall or construction or civil structure with potential danger. The proposed smart safety measurement system transmits various sensor data such as acceleration, gyroscope, geomagnetic, pressure, altitude, temperature, humidity at the spot where Bluetooth beacon sensor nodes are installed, and we can use them for risk perception, prediction, and warning services. To verify the effectiveness of the proposed system, we performed filed tests which showed that measured displacement values of precast retaining walls were within the permitted displacement value of 38.5 mm.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.51-59
• /
• 2024

In this paper, we propose a novel traffic safety system designed to reduce pedestrian traffic accidents and enhance safety on university campuses. The system involves real-time detection of vehicle speeds in designated areas and the interaction between vehicles and pedestrians at crosswalks. Utilizing the YOLOv5s model and Deep SORT method, the system performs speed measurement and object tracking within specified zones. Second, a condition-based output system is developed for crosswalk areas using the YOLOv5s object detection model to differentiate between pedestrians and vehicles. The functionality of the system was validated in real-time operation. Our system is cost-effective, allowing installation using ordinary smartphones or surveillance cameras. It is anticipated that the system, applicable not only on university campuses but also in similar problem areas, will serve as a solution to enhance safety for both vehicles and pedestrians.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.58-64
• /
• 2020

Lately, the development of the semiconductor industry has led to the miniaturization of electronic devices. Therefore, semiconductor wafers of very thin thickness that can be used in Multi-Chip Packages are required. There is active research on the backgrinding process to reduce the thickness of the wafer. The backgrinding process polishes the backside of the wafer, reducing the thickness of the wafer to tens of ㎛. The equipment that performs the backgrinding process requires ultra-precision. Currently, there is no full auto backgrinding equipment in Korea. Therefore, in this study, ultra-precision backgrinding equipment was designed. In addition, finite element analysis was conducted to verify the equipment design validity. The deflection and structural stability of the backgrinding equipment were analyzed using finite element analysis.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.981-988
• /
• 2023

A seismic event caused an accident at the Fukushima Nuclear Power Plant, which further resulted in simultaneous accidents at several units. Consequently, this incident has aroused great interest in the safety of nuclear power plants worldwide. A reasonable safety evaluation of such an external event should appropriately consider the correlation between SSCs (structures, systems, and components) and the probability of failure. However, a probabilistic safety assessment in current nuclear industries is performed conservatively, assuming that the failure correlation between SSCs is independent or completely dependent. This is an extreme assumption; a reasonable risk can be calculated, or risk-based decision-making can be conducted only when the appropriate failure correlation between SSCs is considered. Thus, this study analyzed the effect of the failure correlation of SSCs on the safety of the system to realize rational safety assessment and decision-making. Consequently, the impact on the system differs according to the size of the failure probability of the SSCs and the AND and OR conditions.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.4
• /
• pp.218-228
• /
• 2018

Purpose: The objective of this study is to determine the effect of physical changes on MR temperature imaging at 7.0T and to examine proton-resonance-frequency related changes of MR phase images and T1 related changes of MR magnitude images, which are obtained for MR thermometry at various magnetic field strengths. Materials and Methods: An MR-compatible capacitive-coupled radio-frequency hyperthermia system was implemented for heating a phantom and swine muscle tissue, which can be used for both 7.0T and 3.0T MRI. To determine the effect of flip angle correction on T1-based MR thermometry, proton resonance frequency, apparent T1, actual flip angle, and T1 images were obtained. For this purpose, three types of imaging sequences are used, namely, T1-weighted fast field echo with variable flip angle method, dual repetition time method, and variable flip angle method with radio-frequency field nonuniformity correction. Results: Signal-to-noise ratio of the proton resonance frequency shift-based temperature images obtained at 7.0T was five-fold higher than that at 3.0T. The T1 value increases with increasing temperature at both 3.0T and 7.0T. However, temperature measurement using apparent T1-based MR thermometry results in bias and error because B1 varies with temperature. After correcting for the effect of B1 changes, our experimental results confirmed that the calculated T1 increases with increasing temperature both at 3.0T and 7.0T. Conclusion: This study suggests that the temperature-induced flip angle variations need to be considered for accurate temperature measurements in T1-based MR thermometry.