• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.522-531
• /
• 2002

In order to study the thermal-hydraulic behavior of the cable-in-conduit-conductor (CICC), a numerical model has been developed. In the model, the high heat transfer approximation between superconducting strands and supercritical helium is adopted. The strong coupling of heat transfer at the front of normal zone generates a contact discontinuity in temperature and density. In order to obtain the converged numerical solutions, a moving mesh method is used to capture the contact discontinuity in the short front region of the normal zone. The coupled equation is solved using the finite element method with the artificial viscosity term. Details of the numerical implementation are discussed and the validation of the code is performed for comparison of the results with thse of GANDALF and QSAIT.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.76-81
• /
• 1996

In this paper, a calculation method for fin efficiency of continuous fin is introduced. The continuous fin of in-line and staggered arrangement was divided into many sectors and fin efficiencies of each sectors were calculated by assuming that each sectors be the circular fins. To get the converged fin efficiency which is averaged by the each areas, the number of sectors was increased. The results were compared with equivalnet method by varying the aspect ratios in both cases of in-line and staggered tube arrangement and showed some differences of fin efficiencies.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1809-1814
• /
• 2003

Differential evolution (DE) algorithm is presented and applied to global optimization in this research. DE suggested initially fur the solution to Chebychev polynomial fitting problem is similar to genetic algorithm(GA) including crossover, mutation and selection process. However, differential evolution algorithm is simpler than GA because it uses a vector concept in populating process. And DE turns out to be converged faster than CA, since it employs the difference information as pseudo-sensitivity In this paper, a trial vector and its control parameters of DE are examined and unconstrained optimization problems of highly nonlinear multimodal functions are demonstrated. To illustrate the efficiency of DE, convergence rates and robustness of global optimization algorithms are compared with those of simple GA.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1922-1927
• /
• 2008

In the present study, deposition of discrete and small particles, which diameter is less than $1{\mu}m$, on a filter element was simulated by stochastic method. Trajectory of each particle was numerically solved by Langevin equation and Brownian random motion was treated by Brownian dynamics. Lattice Boltzmann method (LBM) was used to solve flow field around the filter collector and deposit layer. Interaction between flow field and deposit layer was obtained from a converged solution from an inner-loop calculation. Simulation method is properly validated and collection efficiency due to different filtration parameters are examined and discussed. Morphology of deposit layer and its evolution was visualized in terms of the particle size. The particle loaded effect on collection efficiency was also discussed.

• 드라이브 ㆍ 컨트롤
• /
• 제10권3호
• /
• pp.7-13
• /
• 2013

Hydraulic vane pumps are widely used in various hydraulic systems because of its compactness and light weight. It is well known that the vanes and cam ring are separated by very thin liquid films which result in the EHL state. Contrary to the case of cylindrical roller bearings, the inlet and side boundary pressures are much higher than the atmospheric pressure. In this paper, a numerical solution of the EHL of finite line contacts between the cam ring and vane tip with profiled ends is presented. Using a finite difference method with non-uniform grids and the Newton-Raphson method, converged solutions are obtained for moderate load and material parameters. The EHL pressure distribution and film shape are considerably affected by pump delivery pressure and the side boundary condition applied. Both the maximum pressure and the minimum film thickness always occurred near the edge regions. The present results can be used in the design of optimum vane profile in hydraulic vane pump.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.99-109
• /
• 1998

This paper describes the analysis of flow and aeroacoustic field around a car-like body. The governing equations, 3-D unsteady incompressible Navier-Stokes equations, are solved with the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror, After the flow field analysis has been converged, the aerodynamic noise analysis of the side-view mirror has been performed by solving Ffowcs Williams and Hawkings equation. From the present numerical simulation, the A- and C-pillar vortex are evidently shown and the aerodynamic noise level induced by the side-view mirror is predicted to about 100dB.

• Journal of Information Processing Systems
• /
• 제9권3호
• /
• pp.461-476
• /
• 2013

Recently, smart devices for various services have been developed using converged telecommunications, and the markets for near field communication mobile services is expected to grow rapidly. In particular, the realization of mobile NFC payment services is expected to go commercial, and it is widely attracting attention both on a domestic and global level. However, this realization would increase privacy infringement, as personal information is extensively used in the NFC technology. One example of such privacy infringement would be the case of the Google wallet service. In this paper, we propose an zero-knowledge proof scheme and ring signature based on NTRU for protecting user information in NFC mobile payment systems without directly using private financial information of the user.

• 한국통신학회논문지
• /
• 제38C권5호
• /
• pp.454-463
• /
• 2013

스마트폰은 이미 보편화되었고 가전기기나 자동차 등의 각종 생활기기에 통신장치 및 센서가 내장되어 스마트폰과 연동되는 스마트 기기들이 연구 개발되고 있다. 또한 현재는 스마트폰을 이용한 단순한 리모컨이나 원격 제어장치, 사용자 인터페이스의 수준이지만 향후에는 스마트폰에 지능화 기술이 융합되어, 사용자나 기기, 생활환경의 속성을 반영하여 자동으로 기기들이 개인 맞춤형으로 설정되는 개인 환경 서비스 기술이 활성화될 것이다. 본 논문에서는 관련 서비스와 시스템 구조, 요소 기술에 관해 기술한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.39-45
• /
• 2006

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences overall operating condition of blast furnace such as gas flow, chemical reactions and temperature. because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process. In this model, cohesive zone is changed by solid temperature range, FVM is used for numerical simulation. To find location of cohesive zone whole calculation procedure is iterated Until cohesive zone is converged. Through this approach, shape of cohesive zone, velocity, composition and temperature within the furnace are predicted by model.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.361-364
• /
• 1997

Bayesian MAP-EM approaches have been quite useful or tomographic reconstruction in that they can stabilize the instability of well-known ML-EM approaches, and can incorporate a priori information on the underlying emission object. However, MAP reconstruction algorithms with expressive priors often suffer from the optimization problem when their objective unctions are nonquadratic. In our previous work [1], we showed that the use of deterministic annealing method greatly reduces computational burden or optimization and provides a good solution or nonquadratic objective unctions. Here, we further investigate the convergence of the deterministic annealing algorithm; our experimental results show that, while the solutions obtained by a simple quenching algorithm depend on the initial conditions, the estimates converged via deterministic annealing algorithm are consistent under various initial conditions.