• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.237-240
• /
• 2005

We propose a fully converged Ethernet and TDM transport system. Developed Ethernet and TDM convergence system can support not only L2VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system can provide high reliability for Ethernet data due to support protection and restoration function of circuit based networks. Evaluation for Ethernet and TDM path was successfully performed to show the typical application of the proposed system in the legacy networks.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.407-410
• /
• 1994

In this paper, we describe the new unsuperivised learning algorithm, SASOM. It can solve the defects of the conventional SOM that the state of network can't converge to the minimum point. The proposed algorithm uses the object function which can evaluate the state of network in learning and adjusts the learning rate flexibly according to the evaluation of the object function. We implement the simulated annealing which is applied to the conventional network using the object function and the learning rate. Finally, the proposed algorithm can make the state of network converged to the global minimum. Using the two-dimensional input vectors with uniform distribution, we graphically compared the ordering ability of SOM with that of SASOM. We carried out the recognitioin on the new algorithm for all Korean phonemes and some continuous speech.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.53-59
• /
• 2017

Safety inspection activities of the facilities including the electricity, gas, building, and firefighting, etc. are individual checks by the separate law of each government department, comprehensive inspections for the specific managed facilities or during a weak season, and national safety overall diagnostics for the disaster prevention. Thus, types of the inspections are various and they have been carried out repeatedly as well as duplicately. That can make the people or institutes to take such inspections feel great burdens. Therefore, the investigation on the current situation of the individual inspection by the separate law for the electricity, gas, building, and firefighting, etc. as well as of various others by the government needs to be carried out and according to the results the repetitive and duplicated inspections should be reduced and converged to one comprehensive one. In this regard, we proposed solutions to improve the government safety inspection system, function, and role.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.693-698
• /
• 2016

A decentralized control method is proposed to enable a group of robots to achieve maximum performance in multisensory target tracking while avoiding collision with the target. The decentralized control was designed based on navigation function formalism. The study showed that the multiple agent system converged to the positions providing the maximum performance by the decentralized controller, based on Lyapunov and Hessian theory. An exemplary simulation was given for a multiple agent system tracking a stationary target.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.207-210
• /
• 2002

We had designed thermally controlled superconducting switches using a general nonlinear optimized algorithm with constraints and tested its performance. Objective function was to minimize the total volume of the superconducting switch. And constraints were to have designed resistance in normal status and temperature. In order to compare performance of the optimized superconducting switch, we made another one which had geometrically different parameters but had same structure and resistance value when the superconductor part is normal status by heater. Objective function converged very rapidly. As result, volume of the adiabatic part and total volume of the switch were reduced to more than 70% and 30% respectively. Also, even if same heater power was supplied with NiCr wire heater, the optimized superconducting switch had very fast On-OFF switching performance comparing with unoptimized switch.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2003

The V2F turbulence model, which has shown very good performance in several test cases at low speeds, has been applied to supersonic ramp flow with 20. corner angle at the free stream Mach number of 2.79. The flow is known to manifest strong shock wave/turbulent boundary layer interactions. As a comparative study, low-Reynolds k-ε models are also considered. While the V2F model predicts wall-pressure distribution well, it relatively predicts larger separation bubble and higher skin-friction after the reattachment than the experimental data. Although the ellpticity of f equation is the characteristics of incompressible flows, the converged solutions are acquired in the compressible flow with shock waves. The effect of the realizability constraints used in the model is also examined. In contrast to the result of impinging jet flows, the realizability bounds proposed by Durbin deterioate the overall solutions of the supersonic ramp flow.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.38-42
• /
• 2000

In this study, the low velocity impact behavior of the composite laminates has been described by using 3 dimensional nonlinear finite elements. To describe the geometric nonlinearity due to large deformation, the dynamic contact problem is formulated using the exterior penalty finite element method on the base of Total Lagrangian formulation. The incremental decomposition is introduced, and the converged solution is attained by Newton-Raphson Method. The Newmark's constant-acceleration time integration algorithm is used. To make verification of the finite element program developed in this study, the solution of the nonlinear static problem with occurrence of large deformation is compared with ABAQUS, and the solution of the static contact problem with indentation is compared with the Hertz solution. And, the solution of low velocity impact problem for isotropic material is verificated by comparison with that of LS-DYNA3D. Finally the contact force of impact response from the nonlinear analysis are compared with those from the linear analysis.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.101-104
• /
• 2000

The general solution of the anti-plane shear problem for the curved interfacial crack between viscoelastic foam and composites was investigated with the complex variable displacement function and Kelvin-Maxwell model. The Laplace transform was applied to treat the viscoelastic characteristics of foam in the analysis. The stress intensity factor near the interfacial crack tip was predicted by considering both anisotropic and viscoelastic properties of two different materials. The results showed that the stress intensity factor increased with increasing the curvature of the curved interfacial crack and it also increased and eventually converged to a specific value with increasing time.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.324-330
• /
• 2014

In this study, the numerical model developed by Hong et al.(2008) was improved to be applied to rapidly varying flows such as the inundation of dry land or flow transitions due to large gradients of the bathymetry. A numerical approximation was applied that was consistent with the conservation of momentum in flow expansions and with the Bernoulli equation in flow contractions. The approximation was second order, but the accuracy reduced to first order near extreme values by the use of a minmod limiter. The modified model was verified by acomparison with the theoretical critical depth of weir, and for sufficiently smooth conditions and a fine grid size, both approximations converged to the same solution. In terms of the grid size, it was more effective at obtaining solutions than the previous model and reproduced the inundation of dry land.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.167-174
• /
• 2002

In the case of "nonignorable missing data", it is necessary to assume a model dealing with the missing on each situations. In this article, for example, we sometimes meet situations where data set are income amounts in a survey of individuals and assume a model as the values are the larger, a missing data probability is the higher. The method is to maximize using the EM(Expectation and Maximization) algorithm based on the (missing data) mechanism that creates missing data of the case of exponential distribution. The method started from any initial values, and converged in a few iterations. We changed the missing data probability and the artificial data size to show the estimated accuracy. Then we discuss the properties of estimates.