• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.425-428
• /
• 2005

A variety of wireless devices are commercially available now. Most of studies, however, have been directed to the biological effects of mobile-phone EMF. In this study, dosimetric analysis for wireless devices of head-mounted display type and a wristwatch type were made to investigate possible biological effects of these devices. SAR (Specific Absorption Rate) distributions were calculated using FDTD (Finite Difference Time Domain) method, for adult human models such as standard Korean human model and VHP(Visible Human Project) model, as well as scaled models. Measurements were also performed for SAM phantom wearing a simplified prototype for a wireless device for validation of the simulation results. It has been found that children are more vulnerable to such exposure, and these devices could cause some biological effects for relatively lower power compared to conventional mobile pones.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.89-96
• /
• 1993

수자원시설물의 설계에 이용되는 기존의 물수지분석은 수자원의 공간적 분포를 고려하지 못하는 단점이 있다. 특히 많은 수자원의 외부공급량이 있고, 공급 대상지역이 중복될 경우 기존의 물수지분석을 적용할 경우 설계치가 과대 산정될 수 있다. 따라서 본 연구에서는 수자원의 공간적 분포를 고려한 물수지분석 방법을 제시하고, 수자원이용이 대단히 복잡한 동진강, 만경강유역을 포함하는 새만금사업지역을 대상으로 새로운 방법을 적용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.3-12
• /
• 1991

Fuel cells are electrochemical devices that convert the chemical reaction energy directly into the electrical energy. In a typical fuel cell, gaseous fuel is fed continuously to the anode(negative electrode) compartment and the oxidant(i.e, oxygen from air) is fed continuously to the cathode(positive electrode) compartment; the electrochemical reactions take place at the electrodes to produce an electric current. Many of the operational characteristics of fuel cell systems are superior to those of conventional power generation system because of good efficiency, environmental protection, safty, modularity etc. From those reasons, the fuel cells are considered to be the solution to the future problem of energy conversion. The objective of this paper is to introduce the technical status of fuel cell technologies and our national project for the development of the phosporic acid fuel cell.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.960-963
• /
• 2010

In recent days, the development project for industry or housing complex at west coast of Korea is on an increasing trend. the design of soft ground is necessarily required. So, the evaluation of consolidation characteristics for soft ground is very important in design and construction. Especially, the correct evaluation of preconsolidation pressure or OCR for given soft ground is essential at the west coast that has a large tidal range, since it affects the settlement of soft ground. In this study, various methods determining preconsolidation pressure were carried out to investigate the application of each method. The preconsolidation pressure that evaluated from the results of conventional consolidation tests on the songsan clay were compared.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.138-143
• /
• 2003

Ultrasonic flowmeters have more advantages than the conventional method using pressure-difference. In these reasons, many advanced nations are already selling the commercial model. In RIST, we have been developed ultrasonic gas flow meter for the localization since a project was been contracted with POSCO in 1997. This paper describes a new ultrasonic gas flowmeter. This ultrasonic gas flowmeter is developed for accurate measurement of gases in a harsh environmental conditions. It is especially suited for measuring LDG. COG, BFG gases produced in iron & steel making process. In this study, we had developed the commercial model about the first tested model and applied a completed system to the POSCO gas line. Its performance has been proven by extensive field tests for several months in POSCO, iron & steel making company.

• 오토저널
• /
• 제10권2호
• /
• pp.54-60
• /
• 1988

This paper presents a study of tool-life equation on cut-off test by the statistical approach, referred to as response surface methodology instead of a conventional one-variable at a time method. It is the merit of response surface methodology that the test time is reduced to minimize the size and accurate analysis can be done. The reliability of such an equation can also be estimated. Two independent variables, cutting speed and feed rate, were investigated. A first order modeling equation is presented in this project. The results of this study are as follows that tool-life in cut-off operation is affected by cutting speed more than feed, and first order tool-life predicting equations are in good agreement with experimental results.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.407-411
• /
• 2000

Color reproduction n CRT monitors needs colorimetric characterization concluding two stages with 3x3 matrix and three TRCs (Tone-Reproduction Characteristics). The 3x3 matrix is based on the additivity of RGB emissions, and the TRC represents the non-linearity between the input digital counts and the output luminance. The objective of this project is to evaluate the accuracy of color reproduction on LCD monitors using conventional CRT model(GOG model). For two different manufacturers, colorimetric characterizations of desktop LCDs have been performed. Because the transfer function for LCD is very differ from TRC of CRT, some researchers had reported that GOG model is inadequate for the colorimetric characterization of LCDs. However in our experiment, the degree of accuracy was dependent on the shape of electro-optical transfer functions of LCD. It has been founded that the GOG model could be applied for LCD monitors having monotonically increased Electro-optical transfer function.

• 해양환경안전학회지
• /
• 제1권1호
• /
• pp.95-106
• /
• 1995

The small-waterplane-area-twin-hull(SWATH) ship has been recognized as a promising high performance ship because of her superior seakeeping characteristics and large deck area for various operations compared to the conventional monohull ship. significant advances in analytical technics for the prediction of the ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for SWATH ship have been much developed during the last twenty years. Based on these developments in technology an integrated computational procedures for prediction wave loads and structural responses can be used to get a accurate results. But the major problem of SWATH ship's structural design is the accurate prediction of structural responses by the maximum critical loads likely to be experienced during the life of SWATH. To get a easier and safer computational procedures and the analytical approach for determining the accurate structural responses, a case study has been presented through the project experienced.

• 정보관리학회지
• /
• 제8권2호
• /
• pp.96-107
• /
• 1991

통계적 정보 혹은 벡터 모델을 이용하는 자동 색인은 색인어와 문서간에 관계성을 간접적으로 혹은 상대적으로 계산하기 때문에 검색의 정확도를 높이는데 한계가 있다. 이 보다는 적극적인 방법으로 언어학적 정보와 인공 지능의 기술을 이용하여 색인어의 관계성 을 계산하는 방법론을 소개한다. 동사의 격틀을 이용하여 개발된 시스템으로부터 언어적 분 석 방법의 가능성을 찾아볼 수 있다. 미래의 정보 검색은 사용자 중심으로 구성이 되어 사 용자에 대한 연구가 깊게 반영이 되어야 할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.456-457
• /
• 2006

We have carried out the construction of the 154kV intelligent substation with KEPRI. The Intelligent substation is built in Gochang testing facility of KEPCO and consists of electronic instruments for GIS(gas insulated switchgear), digital control panel, remote monitoring and diagnosis system, and digital relay system. Rogowski coil type CT(RCT) and capacitive voltage divider(CVD) are introduced compared with the instrument transformer of conventional type. Digital control Panel(DCP) replaces the LCP(local control panel) which is drived for mechanical operation. For the monitoring of the condition of GIS and TR, various sensors are used. In this Paper, we mention the synopsis and report the progress state of project.