• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.173-180
• /
• 2008

The major objective of this study is to proposal of measuring method and design for the testing curved railway in which the tilting train runs. In order to the speed-up of conventional lines that have many curve lines, there needs a improvement construction of substructure such as the straight or double track work and so on. But in this case, it needs to have a plenty of the cost and the period. Therefore, the tilting train which provides the high-speed service effectively in curve tracks was developed. Besides, the efficiency prediction and the linear synthesis of the existing conventional line for a tiling train service were examined on the preceding studies. So, in this paper we propose the measuring plan and the design of the improvement sections in the testing curved track which was decided as a results of material analysis and field research concerning the extension possibility of transition curves and the bearing of track due to the new developed train traveling. And we look forward to playing a decisive role as reference data on the improvement construction project for the commercial service of the tilting train.

• Proceedings of the KSR Conference
• /
• 2006.11a
• /
• pp.209-218
• /
• 2006

This paper presents the comparison and analysis of the power supply system of a Maglev train and conventional electric railway. Even though all Maglev trains have batteries on their vehicles, electric power supply from the ground side is necessary for levitation, propulsion, on-board electrical equipment, battery recharging, and so on. At low speeds up to $100{\sim}150(km/h)$, the Maglev train, generally, uses a mechanical contact, a current collector as same as conventional electric railway. However, at high speeds, the Maglev train can no longer obtain power from the ground side by using a mechanical contact. Therefore, high speed Maglev trains use their own way to deliver the power to the vehicle from the ground. In this paper, the power supply systems of the german, japanese, and korean low- and high-speed Maglev trains have been reviewed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.545-551
• /
• 2004

CBTC(Communication Based Train Control) System can improve train operation efficiency by realizing moving block system which makes a continuous train interval control in accordance with the position and speed of train. Adopting radio transmission to make a continuous detection of train position and transmit the control data from the ground to a train, CBTC needs dedicated train operation and control algorithm which should be quite different from the conventional track-circuit-based train control system. This paper provides a train operation display and control algorithm for CBTC system in making train interval control, train route control and train supervision. Signalling pattern diagram is devised to analyze the train interval control mechanism of moving block system, and interlocking logic is devised to represent the train route control mechanism of moving block system. For train supervision, train occupation status on railway are displayed by using the segment which virtually divide the whole railway. The proposed method has been successfully applied to the development of CBTC system for the standardized AGT(automatic guided transit) which is under construction now in Korea, and also can be applied to any other CBTC system.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.216-222
• /
• 2003

Train control by radio based communication is one of the interesting new fields in train signal. The radio based control has more benefits, low headway and low construction and maintenance cost, than conventional control. In this paper, a safe and efficient train operation is introduced. Triple radio communications, train to train, train to station, and train to central traffic control, are used to increase the reliability. One of these communications channels has a fault; the others can take the functions of it. Absolute position of a train is transmitted to station via radio communication. In the station, the interlocking mechanism should be activated as the legacy.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1461-1467
• /
• 2006

In case of accidents at the line of Seoul-Pusan high speed railway, high speed train should be operated with making a detour by using existing Seoul-Pusan railroad. For Dae-jeon$\sim$Dae-Gu section which has fragile structures, following points are investigated. In operating existing train, train running time is analyzed by the case of only high speed train being in service and the case of high speed train being in service on condition that existing train is operated. Also the possibility about operation on present train headway and train headway that is applicable to operation and vocational problems would be examined.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.203-206
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed PDM(product data managemnet) to make a system engineering of TTX(tilting train express) with maximum operation speed 180 km/h.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.291-298
• /
• 1999

TCMS(Train Control ＆ Management System) is the management system of train information which intensively control, monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, in comparison with the powering/braking control by conventional relay logic/hardwire circuits, and the software logic was verified by simulation test with TCMS simulator.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.787-792
• /
• 2002

This study presents the wheel wear measurement results of Saemaeul train running on the conventional line. The train set included three different cars which have different shape of wheel profile including KNR and KTX profile currently used in Saemaeul. Train set was operated on Seoul-Pusan line with fixed train set formation for commercial service. Wheel wear measurements were peformed periodically. Here, we describe some results.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1653-1661
• /
• 2008

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the conventional line(ballast track), which is vulnerable to accelerated train speed. The evaluation of tilting train test running the part of Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the performance of each part of track components while tilting train and high speed train were running the existing line, wheel load, rail bending stress, vertical displacement of rail and sleeper were compared so as to evaluate the expected impact by tilting train for improving the train speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1745-1748
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported