• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.49-55
• /
• 2008

This study was carried to investigate the effects of steaming and four different drying methods on the longitudinal liquid permeability of Korean pine (Pinus koraiensis Sieb.et Zucc.) board. Four drying methods were air drying, conventional kiln drying, microwave-vacuum drying and high temperature drying. Darcy equation was used for calculating the specific permeability of the small sapwood specimens taken from the treated boards while capillary rising method was used for the heartwood specimens. The sapwood specimens were extracted with water and benzene-alcohol solution to examine the mechanism of liquid flow in treated wood. No significant correlation was found between specific permeability and the number of resin canals of the sapwood specimens. Extraction decreased the differences of specific permeabilities of the sapwood specimens between the five treatment methods. The effects of extraction on the longitudinal permeability are different between five treatments. The fluid path in heartwood was observed by dynamic observation method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.147-151
• /
• 2009

A wideband correlator, with 45% relative bandwidth is proposed at the frequency range of 3.1-5.1GHz. The structures of the correlator components such as the delay line and the Wilkinson power divider are designed to be realized in transmission line form using the Agilent's Advanced Design System (ADS). The correlator made by using three unique wideband 3-dB couplers, rat-race coupler and one 3-dB wilkinson power divider to reach the required bandwidth. The insertion loss, amplitude imbalance and phase imbalance between ports are presented. The proposed correlator makes compact size better than correlator of conventional structure.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2835-2840
• /
• 2010

A series of $MoO_3/CeO_2-ZrO_2$ catalysts with different Mo content (8 - 20 wt %) were prepared by simple co-precipitation followed by impregnation method and were characterized by X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), energy dispersive spectroscopic (EDS) techniques. The prepared materials were tested for catalytic activity by the synthesis of benzimidazole derivatives using condensation of aromatic aldehydes and o-phenylenediamine by conventional and microwave method. Obtained results reveal that the catalytic activity increases with increase in Mo wt % loading. The best catalytic activity was obtained with 20 wt % $MoO_3/CeO_2-ZrO_2$. The particle size or crystallite size was estimated using Debye-Scherrer equation. After completion of reaction, the catalyst can be recovered efficiently and reused with consistent activity.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.13-18
• /
• 2019

Superconducting junctions of topological insulator (TI) are expected to host Majorana bound state, which is essential for developing topological quantum information devices. In this study, we fabricated Josephson junctions (JJs) made of Sb-doped Bi2Se3 TI nanoribbon and PbIn superconducting electrodes. In the normal state, the axial magnetoresistance data exhibit periodic oscillations, so-called Aharonov-Bohm oscillations, due to a metallic surface state of TI nanoribbon. At low temperature of 1.5 K, the TI JJ reveals the superconducting proximity effects, such as the critical current and multiple Andreev reflections. Under the application of microwave, integer Shapiro steps are observed with satisfying the ac Josephson relation. Our observations indicate that highly-transparent superconducting contacts are formed at the interface between TI nanoribbon and conventional superconductor, which would be useful to explore Majorana bound state in TI.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.13-16
• /
• 1997

The permeation, solution and diffusion of simple gases ($He, H_2, O_2, N_2$ and CH$_4$) and condensible vapers($CO_2, SO_2, C_2H_4$ and $C_3H_8$), and the mixed gases ($O_2/N_2$ mixtures and $CO_2/CH_4$ mixtures) through composite membrane was studied. Composit membranes were made by deposition of aromatic fluorocarbons onto polymer substrams of porous Celgard in a microwave discharge. In the both cases of simple gases and condensible vapors, as the kinetic molecular diameter of the permeant molecules increased, the permeability decreased. However, when the kinetic molecular dimemr are similar, the condensible vapors showed higher permeabilities than that of permanent gases. The vapor solubility increased with increasing critical temperature of the vapors. However, in the case of propane, despite its high critical temperature, it showed lower solubility than other vapors. The vapor diffusivity decreased with increasing kinetic diameter of the molecule. Compared to conventional polymers, the plasma polymers showed much lower values for vapor diffusivities. The pressure of the permeant did not affect the permeability. The permeability was also not affected by the composition in cases of mixed gases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.99-108
• /
• 2018

This paper presents a design study of a solid state power oscillator to replace the conventional magnetron. The operational conditions of a single-stage 300 W LDMOS power amplifier were fully characterized. The power module consisted of two amplifiers connected in parallel. A delay-line feedback loop was designed for self-oscillation. A phase shifter was inserted in the delay-line feedback loop for adjusting the round-trip phase. Experiments performed using the power oscillator showed an output power of 800 W and a DC-RF conversion efficiency of 58 % at 2.327 GHz. The measured results were in good agreement with those predicted by numerical simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1183-1188
• /
• 2011

The novel metal position detection method is proposed where conventional techniques, in high temperature, moisture and particle environment, are not able to be applied. It is known that electronic devices, utilizing microwave, ultrasonic or optical technique, are hard to apply for sensing application where temperature is exceeding above 300 degree centigrade. Metal position detection technique, which was consisted with passive elements facing hot sensing surface, utilizing electromagnetic wave was investigated, and the metal detection sensitivity was measured by varying sensor frequency and sensing distance. Measurement result in laboratory test set-up showed position measurement resolution up to 1mm, when distance between two sensing elements were 500mm, and possibility to measure position of hot metal sheet having very high surface temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.430-433
• /
• 2001

The 0.96MgTiO$_3$-0.04SrTiO$_3$+xCe(x=0∼1.6 wt%) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1300$^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite SrTiO$_3$ and ilmenite MgTiO$_3$ structures were coexisted in the 0.96MgTiO$_3$-0.04SrTiO$_3$+xCe(x=0∼1.6 wt%) ceramics. The dielectric constant($\varepsilon$$\sub$r/) was increased with addition of Ce. The temperature coefficient of resonant frequency($\tau$$\sub$f/) was gradually varied from positive value to the negative value with increasing the Ce. The temperature coefficient of resonant frequency of the 0.96MgTiO$_3$-0.04SrTiO$_3$+0.2Ce ceramics was near zero, where the dielectric constant, quality factor, and $\tau$$\sub$f/ were 20.68, 50, 272 and -0.5pm/$^{\circ}C$, respectively.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.15-20
• /
• 2017

A conventional TV relay broadcast is a method of transmitting a program by means of a microwave, a leased wire, or a satellite. With the latest advances in LTE network, a relay approach using LTE mobile communications network has become increasingly competing with the traditional TV relay broadcast method. Since 2012, TV Chosun has been using the LTE network for marathon production, and channel A has also broadcast a marathon production broadcast using the LTE network. Therefore in this paper, we investigated the marathon relay method using LTE mobile communications network and compared with the traditional TV marathon relay method, and then suggested the optimum method for the marathon relay.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.56-61
• /
• 2013

Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.