• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2403-2407
• /
• 2012

압축하중을 받는 말뚝의 하중-침하관계를 구하기 위한 하중전이법에서는 말뚝을 유한개의 요소로 분할하고 각각의 요소들에 대하여 말뚝주면변위와 주면 전이하중 그리고 말뚝선단변위와 선단저항력 사이의 적합조건으로부터 말뚝 요소의 단면력과 변위를 계산하게 된다. 통상적인 하중전이법에 의할 경우 모든 말뚝요소들에 대하여 하중-변위 사이의 적합조건을 만족하도록 반복계산을 수행해야 하므로 계산량이 과다한 단점이 있다. 본 연구에서는 압축하중을 받는 말뚝에 대한 미분방정식을 유한차분식으로 정식화하여 말뚝 바닥요소를 제외한 요소에 대해서는 반복계산 없이 직접 말뚝 단면력과 변위량을 계산할 수 있는 간편 계산법을 도입하였다. 간편 계산법에 의한 계산결과를 기존의 해석자료와 비교하여 보았는데 하중-침하관계와 말뚝 단면력 분포가 일치함을 알 수 있었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.259-259
• /
• 2001

;A new root canal instrument and instrumentation technique: a preliminary report. Cleaning and shaping the root canal system has been and continues to be a challenge for even the most experienced endodontist. Curved. narrow canals. in particular. cause difficulties for the beginner as well as the specialist. A new instrument designed to incorporate new concepts was developed to ameliorate the problems in cleaning and shaping root canal systems. This new instrument has been given the name of SW (Senia and Wildey). The new SW instrument uses controlled right and left rotational forces. This motion was used to clean and shape simulated root canals in plastic blocks and root canals in extracted teeth. Instrumentation appeared to be easier. faster. and more precise than with conventional instruments. especially in curved canals where there was remarkable reduction of canal transportation. A mechanical version of the SW instrument was also developed. It was used to flare the coronal portion of the root canal system. Wildey WL. Senia ES., Oral Surg Oral Med Oral Pathol1989 Feb:67(2):198-207 Another look at root canal instrumentation. Several aspects of root canal instrumentation need additional research. Various factors must be considered in an analysis of instrumentation of the root canal system: the dentin that is cut: the technique used to cut it: the design of the instruments: the material and manufacturing process used to make the instruments: the irrigant used during the procedure: and the anatomic configuration of the root canal system. An analysis of these factors clearly indicates that existing root canal instruments and techniques are less than ideal and. in fact. do not accomplish what is expected of them. Root canals must be properly. but. at the same time. destructive and unnecessary removal of dentin should be kept to a minimum. The Flex-R and Canal Master instruments were developed to address some of the shortcomings of existing instruments and techniques. More scientifically based research is needed to fully evaluate these new instruments and techniques and to develop future instruments. Wildey WL; Senia ES. Montgomery S., Oral Surg Oral Med Oral Pathol1992 Oct:74(4):499-50799-507

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.481-486
• /
• 2013

An electromagnetic launcher (EML) system accelerates and launches a projectile by converting electric energy into kinetic energy. There are two types of EML systems under development: the rail gun and the coil gun. A railgun comprises a pair of parallel conducting rails, along which a sliding armature is accelerated by the electromagnetic effects of a current that flows down one rail, into the armature and then back along the other rail, but the high mechanical friction between the projectile and the rail can damage the projectile. A coil gun launches the projectile by the attractive magnetic force of the electromagnetic coil. A higher projectile muzzle velocity needs multiple stages of electromagnetic coils, which makes the coil gun EML system longer. As a result, the installation cost of a coil gun EML system is very high due to the large installation site needed for the EML. We present a coil gun EML system that has a new structure and arrangement for multiple electromagnetic coils to reduce the length of the system. A mathematical model of the proposed coil gun EML system is developed in order to calculate the magnetic field and forces, and to simulate the muzzle velocity of a projectile by driving and switching the electric current into multiple stages of electromagnetic coils. Using the proposed design, the length of the coil gun EML system is shortened by 31% compared with a conventional coil gun system while satisfying a target projectile muzzle velocity of over 100 m/s.

• 한국철도학회논문집
• /
• 제17권2호
• /
• pp.133-139
• /
• 2014

국내에 건설 운영 중인 경전철 고가구조물은 설계 당시 경전철 고가구조물 설계기준이 마련되어 있지 않아 일반 철도교 설계기준 및 국외 차량제작사에서 제시한 설계기준을 참조하여 설계된 관계로, 고가구조물이 과다 설계되어 비경제적으로 건설된 주된 이유가 되고 있다. 본 연구에서는 고무차륜형 경량전철이 고가구조물 위를 각각 50km/h, 60km/h, 70km/h의 속도로 주행 중 5개 제동 지점별로 제동 시 고가 하부구조물에 작용하는 제동하중을 현장 계측시험을 통해 분석하였고, 현재 설계시 반영되고 있는 철도설계기준과 비교하였다. 본 연구에서 제시된 제동하중 시험분석 결과는 향후 경전철 고가구조물 설계기준 제정 시 참조될 수 있다.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.702-715
• /
• 1990

본 연구에서는 개수로 후래시 증발기 내부를 단순화된 형태로 가정하여 앞서 언급된 운전조건 및 유입되는 기포의 갯수유량(혹은 기공률)에 따라 증발기 내부의 속 도 및 온도분포를 수치적으로 계산해 보고자 한다. 이를 위해 유동을 정상상태의 난 류유동으로 가정하였으며, 구형의 기포에 대해 평균적인 운동 및 성장을 지배하는 방 정식을 세우고 상변화에 의한 증발량을 구하였다. 즉 입구에서 유입된 기포들이 성 장하면서 자유표면을 통해서 빠져나가는 운동 궤적을 추적함으로써 증발기 내부 유동 의 속도 및 온도분포를 구하고 이를 바탕으로 총 증발량 및 증발성능을 예측해 보고자 하는 것이다. 그리고 이렇게 계산된 결과들을 기존의 실험값과 비교하였다.

• Structural Engineering and Mechanics
• /
• 제25권4호
• /
• pp.445-466
• /
• 2007

As the LNG (Liquefied Natural Gas) tank contains cryogenic liquid, realistic thermal analyses are of a primary importance for a successful design. The structural details of the LNG tank are so complicated that some strategies are necessary to reasonably predict its temperature distribution. The proposed heat transfer model can consider the beneficial effects of insulation layers and a suspended deck on temperature distribution of the outer concrete tank against cryogenic conditions simply by the boundary conditions of the outer tank model. To this aim, the equilibrium condition or heat balance in a steady state is utilized in a various way, and some aspects of heat transfer via conduction, convection and radiation are implemented as necessary. Overall thermal analysis procedures for the LNG tank are revisited to examine some unjustifiable assumptions of conventional analyses. Concrete and insulation properties under cryogenic condition and a reasonable conversion procedure of the temperature-induced nonlinear stress into the section forces are discussed. Numerical examples are presented to verify the proposed schemes in predicting the actual temperature and stress distributions of the tank as affected by the cryogenic LNG for the cases of normal operation and leakage from the inner steel tank. It is expected that the proposed schemes enable a designer to readily detect the effects of insulation layers and a suspended deck and, therefore, can be employed as a useful and consistent tool to evaluate the thermal effect in a design stage of an LNG tank as well as in a detailed analysis.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.175-191
• /
• 2020

In this article, for the first time, the seismic behavior of elliptic-braced moment resisting frame (ELBRF) is assessed through a laboratory program and numerical analyses of FEM specifically focused on the development of global- and local-type failure mechanisms. The ELBRF as a new lateral braced system, when installed in the middle bay of the frames in the facade of a building, not only causes no problem to the opening space of the facade, but also improves the structural behavior. Quantitative and qualitative investigations were pursued to find out how elliptic braces would affect the failure mechanism of ELBRF structures exposed to seismic action as a nonlinear process. To this aim, an experimental test of a ½ scale single-story single-bay ELBRF specimen under cyclic quasi-static loading was run and the results were compared with those for X-bracing, knee-bracing, K-bracing, and diamond-bracing systems in a story base model. Nonlinear FEM analyses were carried out to evaluate failure mechanism, yield order of components, distribution of plasticity, degradation of structural nonlinear stiffness, distribution of internal forces, and energy dissipation capacity. The test results indicated that the yield of elliptic braces would delay the failure mode of adjacent elliptic columns and thus, help tolerate a significant nonlinear deformation to the point of ultimate failure. Symmetrical behavior, high energy absorption, appropriate stiffness, and high ductility in comparison with the conventional systems are some of the advantages of the proposed system.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.241-250
• /
• 1991

구조설계에 사용되는 대부분의 변수들은 다소간의 불확실성을 내포하고 있으며, 구조물의 안전성을 향상시키기 위해서는 이러한 불확실성에 대한 체계적인 연구를 통하여 구조설계시 이를 고려하는 것이 바람직하다. 본 논문에서는 선체와 같이 복잡한 구조물의 신뢰성해석을 효율적으로 수행할 수 있는 방법을 개발하기 위하여, 구조해석의 마지막 단계에서 신뢰성이론을 적용하던 종전의 방법과는 달리, 구조해석의 각 단계마다 확률변수들이 분산특성을 고려할 수 있는 확률 유한요소법을 도입하여, 기존의 신뢰성 이론중 가장 많이 사용되고 있는 2차 모우먼트방법(second moment method)에의 응용에 적합하도록 정식화하고, 이를 바탕으로 유조선 web frame의 신뢰성해석을 수행하여 확률변수들의 분산특성에 따른 web frame의 안전성을 검토하였다. 확률 유한요소법에 의한 신뢰성해석 기법은 유한요소법 알고리즘을 응용한 것이므로, 기존의 각종 유한 요소 package에 본 논문의 신뢰성해석 알고리즘을 도입하는 경우, 기존의 유한요소법에서 사용되는 입력데이타에 확률변수들의 분산특성(C.O.V)등의 통계 데이타만을 추가로 입력하면 구조응답의 평균치뿐만 아니라, 구조물의 신뢰성에 대한 다양한 정보들도 얻을 수 있다.

• 폴리머
• /
• 제36권4호
• /
• pp.434-439
• /
• 2012

이온성 고분자-금속 복합체(ionic polymer-metal composite, IPMC) 구동기의 구동성능 향상을 위해 전기방사를 통해 제조된 나피온/전도성 나노입자 웹을 나피온 필름의 양면에 접합시켜 전해질막을 개질하였다. 전도성 나노입자는 다층탄소나노튜브(multiwalled carbon nanotube, MWNT)와 은 나노입자가 사용되었으며, 이를 각각 나피온 용액에 분산시켜 전기방사하였다. 개질된 IPMC는 향상된 구동변위, 응답속도 및 구동력을 나타내었으며 은 나노입자에 비해 MWNT가 더욱 뛰어난 구동변위와 구동력을 유도하였고, 전도성 나노입자가 포함되지 않은 전기방사 웹을 적용한 경우에도 성능향상이 관찰되었다. 제조된 IPMC의 우수한 구동성능은 전기방사 웹의 다공성에 의한 전해액 이동의 용이성, 고분산된 전도성 나노입자에 의해 유도된 높은 전기용량 및 낮은 전극 저항 때문인 것으로 분석되었다.