• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2211-2224
• /
• 1994

On face milling operation a new optimal cutter, which can minimize the resultant cutting forces, was designed from the cutting force model. Cutting experiments were carried out and the cutting forces of the new and conventional cutters were analyed in time and frequency domains. The resultant cutting forces were used as the objective function and cutter angles as the variables. A new optimal cutter design model which can minimize the resultant cutting forces under the constraints of variables was developed and its usefulness was proven. The cutting forces in feed direction of the newly designed cutter are reduced in comparison with those from the conventional cutter. The magnitudes of an insert frequency component of cutting force from the newly designed cutter are reduced than those from conventional cutter and the fluctuations of cutting force are also reduced.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.72-79
• /
• 2000

A new optimal tool design model which can be minimized the resultant cutting forces under the constrains of variables was developed. The resultant cutting forces are used as the objective function and tool angles are used as the variables. Cutting experiments of tool wear and chip length using the new and conventional tools wee carried out. Tool life of optimized cutter are more increased than those of conventional cutter by 2.29 times and 2.52 times at light and at heavy cutting conditions respectively. Chip length of optimized cutter are more increased than those of conventional cutter It is considered that the decrease of the resultant cutting forces is the cause that an effective rake and shear angles by the shape of optimal cutter.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.267-279
• /
• 2004

This paper presents an improved Monte Carlo simulation for the probabilistic determination of initial cable forces of cable-stayed bridges under dead loads using the response surfaces method. A response surface (i.e. a quadratic response surface without cross-terms) is used to approximate structural response. The use of the response surface eliminates the need to perform a deterministic analysis in each simulation loop. In addition, use of the response surface requires fewer simulation loops than conventional Monte Carlo simulation. Thereby, the computation time is saved significantly. The statistics (e.g. mean value, standard deviation) of the structural response are calculated through conventional Monte Carlo simulation method. By using Monte Carlo simulation, it is possible to use the existing deterministic finite element code without modifying it. Probabilistic analysis of a truss demonstrates the proposed method' efficiency and accuracy; probabilistic determination of initial cable forces of a cable-stayed bridge under dead loads verifies the method's applicability.

• Strategy21
• /
• 통권41호
• /
• pp.208-231
• /
• 2017

The balance of power in conventional forces between the two Koreas works in favor of the South Korea in the Korea peninsula. But, the balancing mechanism between the two Koreas in asymmetric forces like nuclear and missile forces works absolutely in favor of the North Korea. That's why it should be timely for the ROK military to review existing strategy and revise a new counter strategy against the threat posed by the North Korea's nuclear and missile forces. The ROK military is now developing 4D, KAMD, KILL Chain strategies as means to cope with the North Korea's nuclear and missile threats. Considering efforts and resources invested now, the strategies are expected to be in place in next five or more years. However, approaches to those strategies seem to be rather fragmentary and conceptual than comprehensive and pragmatic. The types of strategies against the North Korea's military threats need to be a deterrence in peace time and a fighting and winning in war time in the Korean theater. But, the most important element in the deterrence strategy is the credibility. This study concludes with an new strategic concept titled "ADAD(Assured Defense, Assured Destruction)" as an alternative to existing strategies to deal with the North Korea's nuclear and missile threats.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.87-96
• /
• 1996

On face milling operation a newly optimal tool, which can minimize the resultant cutting forces resulted from the cutting force model, was designed and manufactrued. Cutting experiments using the new and conventional tools were carried out and the cutting forces resulted from those tools were analyzed in time and frequency domains. The performance of the optimized cutter was tested through the dynamic cutting forces resulted form the newly designed tool are much reduced in comparision with those from the conventional tool. By reducing the dynamic cutting force fluctuations, machine tool vibrations can be reduced, and stable cutting operation can be carried out.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.513-518
• /
• 1999

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.118-126
• /
• 2000

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• 소성∙가공
• /
• 제17권7호
• /
• pp.511-516
• /
• 2008

A drawbead die for the experimental determination of drawbead forces was newly introduced in this paper. While the conventional Nine's drawbead die inevitably includes effects of a blank holding force on the measured drawbead forces, the new drawbead die excludes it by removing the blank holder contact in the dieface. Therefore, the new drawbead die can provide more realistic drawbead forces without considering somewhat arbitrary effect of blank holder with the computational procedure of forming process. The drawbead opening force and restraining force obtained by adopting the two experimental dies were compared for the validation of accuracy in the FEM simulation of automotive fender forming process. The compared section strains and draw-ins confirmed that the present drawbead die provides better drawbead forces for an accurate FEM simulation of sheet metal forming process.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.161-168
• /
• 1995

The variable-node solid element with rotational degrees of freedom has been developed far efficient connection of transition zones and far connection of different types of elements with rotational degrees of freedom. In applying this new element to engineering problems, it is necessary to fine the relations between tractions and equivalent nodal farces. In this case, the equivalent forces in solid element with rotational degrees of freedom and ratational forces are a bit different from that af conventional solid elements. Some typical examples are presented.

• 안보군사학연구
• /
• 통권5호
• /
• pp.173-202
• /
• 2007

After successful nuclear tests Pakistan launched a more severe surprise attack toward India than before. It is highly possible that North Korea will adopt this Pakistan military strategy if it is armed with nuclear weapons. The North Korean forces armed, with nuclear bombs could make double its war capability through strengthening aggressive force structure and come into effect on blocking reinforcement of the US forces at the initial phase of war time. Therefore we may regard that Pyongyang's nuclear arming is a major one of various factors which increase possibility of waging a conventional warfare or a nuclear war. North Korea's high self-confidence after nuclear arming will heighten tension on the Korean Peninsula via aggressive military threat or terror toward South Korea, and endeavor to accomplish its political purpose via low-intensity conflicts. For instance, nuclear arming of the Pyongyang regime enforces the North Korean forces to invade the Northern Limit Line(NLL), provoke naval battles at the West Sea, and occupy one or two among the Five Islands at the West Sea. In that case, the South Korean forces will be faced with a serious dilemma. In order to recapture the islands, Seoul should be ready for escalating a war. However it is hard to imagine that South Korea fights with North Korea armed with nuclear weapons. This paper concludes that the Pyongyang regime after nuclear arming strongly tends to occupy superiority of military strategy and wage military provocations on the Korean Peninsula.