• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.814-827
• /
• 2004

The compressed mode is used to perform inter-frequency and inter-system handover in WCDMA. The instantaneous transmit power is increased in the compressed frame in order to keep the QoS(Quality of Service) unaffected by the reduced processing gain. Furthermore, since the inner loop power control is not active during the transmission gap and the effect of interleaving is decreased, a higher Eb/No target is required, which directly affects the system performance. Due to the impact on performance, the compressed mode should be activated by the RNC(Radio Network Controller) only when there is real need to execute an inter-frequency or inter-system handover. However, 3GPP does not define the method that decides the compressed mode activation. In order to reduce performance degradation, there is need the decision method. In this paper, we consider a combined cell structure in which some neighbor cells have a frequency the same as serving cell and the others have a different frequency or system. Under consideration, we analyze the effect of the compressed mode on the WCDMA forward link performance. In order to avoid performance degradation, we propose an UE(User Equipment) measurement method that can restrict the activation area of the compressed mode of UE that does not need it and evaluate its performance by simulations. Analytical results show that the use of the compressed mode affects the performance degradation. And simulation results show that proposed method leads to better performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.115-115
• /
• 2003

최근 회전기계에 대한 세계적인 기술추세를 볼 때 해를 거듭할수록 더욱 정밀해지고 고속화에 대한 요구가 한층 증대되고 있으며 이러한 측면에서 여러 분야에 우수한 장점을 지니고 있는 능동적 자기베어링의 회전축계 활용에 대한 연구가 활발히 진행되고 있다. 특히 프랑스를 중심으로 한 미국, 일본 등이 이에 대한 연구를 활발하게 수행하여 고속 공작기계 스핀들을 비롯한 고진공 펌프 및 각종 터어빈, 압축기 등에 실용화시키는 단계에 있다. 그러나 국내 관련기술에 대한 연구는 연구소, 학계를 중심으로 실험실적인 기초연구로서 부분적으로 수행하는 단계에 있으며 관련분야 활용을 위한 본격적인 연구는 수행되지 못하고 있는 실정이고 이를 실용화시키기 위한 일환으로 능동적 자기 베어링의 회전 축계를 구성하고 있는 요소기술 중 하나인 전력 증폭기의 개발이 이뤄져야 할 필요성이 있는데 본 논문에서는 네트웍 기반 전력 증폭기 개발을 시도하였다. 전력 증폭기는 크게 리니어 앰프와 스위칭 앰프로 구분된다. 리니어 앰프의 경우 회로가 간단하고 노이즈가 비교적 작다는 장점이 있지만 전력손실 및 발열이 크기 때문에 에너지 측면에서 저 효율이라는 점과 따로 방열판을 부착해야 한다는 단점을 가지고 있고, 스위칭 앰프의 경우 전력손실이 작은 반면, 회로가 비교적 복잡하고 노이즈의 발생 가능성이 높다는 단점이 있다. 본 논문에선 위 두 가지 방식을 혼합한 혼합형 전력 증폭기로 설계하였다. 또한 기존에 전력증폭기의 경우 상위 주제어기로부터 제어량을 아날로그 신호로 통신하기 때문에 발생할 수 있는 EMI 노이즈신호에 대한 대책을 세워야 하는데 본 연구를 통해 개발된 전력증폭기는 따로 보조제어기(TMS320LF2406A)를 두어 상위 주제어기에 전력증폭기의 상태값을 궤환할 수 있도록 명령 신호체계를 전체 시스템의 샘플링 시간을 고려하여 비교적 전송 속도가 빠른 CAN(Controller Area Network)으로 구축하여 주제어기와 전력 증폭기간에 양방향 통신이 가능하도록 하였다. 이로써 전력증폭기의 상태정보를 알 수 있다. 따라서 본 논문에서는 칩 설계기술의 발전으로 가격대 성능비가 우수한 DSP(TMS320LF2406A)를 이용하여 과거의 아날로그 방식의 명령신호체계를 디지털 신호체계로 바꿈으로써 네트웍을 통해 전력증폭기의 상태진단 가능성을 검증한다.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.83-91
• /
• 2012

In recent days, the study on hybridization of the heavy-duty is going on, actively. Especially, the improvement of fuel economy can be maximized in the intra-city bus because it drives the fixed route. For developing the hybrid electric intra-city bus, optimized control strategy which is possible to be applied with real vehicle is necessary. If the real-time control strategy is developed based on the HILS, it is possible to verify the real-time ability and fail-safety function which has the vehicle stay in safe state when the functional errors are occurred. In this study, the HILS system of series hybrid electric intra-city bus is developed to verify the real time control strategy and the fail-safety functions. The main objective of the paper is to build the HILS system for verifying the control strategy (rule-based control) which is implemented to reflect the Dynamic Programming results and fail-safety functions.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.353-362
• /
• 2010

This paper presents a centralized control algorithm for power system performance in the Korean power system using Flexible AC Transmission Systems (FACTS) devices. The algorithm is applied to the Korean power system throughout the metropolitan area in order to alleviate inherent stability problems, especially concerns with voltage stability. Generally, control strategies are divided into local and centralized control. This paper is concerned with a centralized control strategy in terms of the global system. In this research, input data of the proposed algorithm and network data are obtained from the SCADA/EMS system. Using the full system model, the centralized controller monitors the system condition and decides the operating point according to the control objectives that are, in turn, dependent on system conditions. To overcome voltage collapse problems, load-shedding is currently applied in the Korean power system. In this study, the application of the coordination between FACTS and switch capacitor (SC) can restore the solvability without load shedding or guarantee the FV margin when the margin is insufficient. Optimal Power Flow (OPF) algorithm, for which the objective function is loss minimization, is used in a stable case. The results illustrate examples of the proposed algorithm using SCADA/EMS data of the Korean power system in 2007.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1147-1158
• /
• 2020

The purpose of this study was to measure the engine torque and rotational speed of a 67 kW class agricultural tractor according to tire type during plow tillage and to analyze the gear strength of the driving shift for the tractor. A field test was performed under the condition with a single tire (Test A) and dual tires (Test B) to increase the ground width of the rear tires. A load monitoring system was developed, and the engine torque and rotational speed were measured using controller area network (CAN) communication. The engine torque and rotational speed during plow tillage were calculated as the equivalent torque and speed using Palmgren Miner's rule. As a result, the equivalent torque and speed in Test A and Test B were 181.0 Nm and 1,913 rpm and 206.1 Nm and 2,130 rpm, respectively. As the ground width of the rear tire was increased, the bending stress in Test B was about 9.9 to 10.5% higher than that of the Test A, and the contact stress was about 4.6 to 4.9% higher than that of the Test A. Under all conditions, the safety factor for the bending and contact stress was 1 or more. Thus, the driving shift gears for the dual tire type are considered safe.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1135-1145
• /
• 2020

The purpose of this study was to compare and analyze the emissions of SOx and NH3 for a 78 kW class agricultural tractor during agricultural operations. A real-time monitoring system was constructed for measuring the load data. The field test was conducted during plow and rotary tillage. The working conditions were selected with the transmission gears in M3 Low and M2 High for the plow tillage and L3 High and L3 Low for the rotary tillage. The engine torque and fuel consumption were measured using controller area network (CAN) communication, and the emissions of SOx and NH3 were calculated based on the fuel consumption. As a result of the field tests, the engine torque was higher for the plow tillage than for the rotary tillage. As the gear stage was increased, the engine torque became higher. The emissions of SOx and NH3 were higher for the plow tillage than for the rotary tillage because the fuel consumption increased. Moreover, the emissions of SOx and NH3 tended to be more distributed for the rotary tillage than for the plow tillage. To develop an emission factor for agricultural machinery, it is important to measure reliable emission data during agricultural operations. In a future study, we will collect various emission data using a portable emission measurement system during agricultural operations.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.571-577
• /
• 2021

This study is a study on System On Chip (SOC) that implements virtual engine sound in electric vehicles without engines, and realizes vivid engine sound by combining Adaptive Difference PCM (ADPCM) method and frequency modulation method for satisfaction of driver's needs and safety of pedestrians. In addition, by proposing an electronic sound synthesis algorithm applying Musical Instrument Didital Interface (MIDI), an engine sound synthesis method and a constitutive model of an engine sound generation system are presented. In order to satisfy both drivers and pedestrians, this study uses Controller Area Network (CAN) communication to receive information such as Revolution Per Minute (RPM), vehicle speed, accelerator pedal depressed amount, torque, etc., transmitted according to the driver's driving habits, and then modulates the frequency according to the appropriate preset parameters We implemented an interaction algorithm that accurately reflects the intention of the system and driver by using interpolation for the system, ADPCM algorithm for reducing the amount of information, and MIDI format information for making engine sound easier.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1039-1046
• /
• 2022

After the COVID-19 pandemic, the spread of the untact culture and the Fourth Industrial Revolution, which generates various types of data, generated so much data that it was not compared to before. This led to higher data throughput, revealing little by little the limitations of the existing network system centered on vendors and hardware. Recently, SDN technology centered on users and software that can overcome these limitations is attracting attention. In addition, SDN-based load balancing techniques are expected to increase efficiency in the load balancing area of the server cluster in the data center, which generates and processes vast and diverse data. Unlike existing SDN load distribution studies, this paper proposes a load distribution technique in which a controller checks the state of a server according to the occurrence of an event rather than periodic confirmation through a monitoring technique and allocates a user's request by weighting it according to a load ratio. As a result of the desired experiment, the proposed technique showed a better equal load balancing effect than the comparison technique, so it is expected to be more effective in a server cluster in a large and packet-flowing data center.

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.16-25
• /
• 2022

The purpose of this study was to calculate and analyze the engine load factor of major agricultural operations using a 78 kW class agricultural tractor for estimating the emission of air pollutants and greenhouse. Engine load data were collected using controller area network (CAN) communication. Main agricultural operations were selected as plow tillage (PT), rotary tillage (RT), baler operation (BO), loader operation (LO), driving on soil (DS), and driving on concrete (DC). The engine power was calculated using the measured engine load data. A weight factor was applied to load factor for considering usage ratio according to agricultural operations. Weight factors for different agricultural operations were calculated to be 27.4%, 32.9%, 17.5%, 7.7%, 4.5%, and 10.0% for PT, RT, BO, LO, DS, and DC, respectively. As a result of the field test, load factors were 0.74, 0.93, 0.41, 0.23, 0.27, and 0.21 for PT, RT, BO, LO, DS, and DC, respectively. The engine load factor was the highest for RT. Finally, as a result of applying the weight factor for usage ratio of agricultural operations, the integrated engine load factor was estimated to be 0.63, which was about 1.31 times higher than the conventional applied load factor of 0.48. In future studies, we plan to analyze the engine load factor by considering various horsepower and working conditions of the tractor.