• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.173-176
• /
• 2003

Microdisplay with transmissive to realize the virtual display con make the large screen with small devices, so virtual image realization technology have been developed by using 0.24" microdisplay panel. We developed microdisplay controller with using Kopin panel. microdisplay will be used in several telecommunication terminal which can transfor text message and still/moving images.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.13-21
• /
• 2001

We propose a universal image processor for a-Si TFT LCD of UXGA class that can display the full screen on the LCD panel with low resolution of video sources such as NTSC, VGA, SVGA, XGA, and SXGA by using the proposed interpolation filter. In addition, we propose a real-time contrast controller for image improvement of multi-gray scale image. The operation of the proposed methods has been verified using Synopsys VHDL and computer simulation. Results show that the proposed methods might be suitable for a UXGA LCD controller for real-time image improvement.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.253-258
• /
• 2020

우리나라의 석유화학산업단지는 폭발성 가스와 가연성 가스로 인하여 언제나 폭발 위험성이 높다. 이러한 폭발을 방지하기 위한 방법으로 석유화학산업단지의 대부분 설비에 방폭 성능을 요구하고 있다. 방폭용으로 현재 사용하고 있는 제어기 패널은 패널의 내부와 외부의 압력(양압)과 온도를 일정하게 유지를 위해 외부에서 수동으로 공기를 주입하는 방식을 사용하고 있다. 이에 본 논문은 자동으로 온도를 제어할 수 있도록 패널 내부의 온도에 따라 가열과 냉각을 자동으로 수행하는 자동 온도조절기를 제안한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1236-1239
• /
• 2009

Each LCD TFT panel requires a power supply IC on the panel board. The IC provides the power rails for the timing controller, source and gated driver IC and others. The industry trend moves towards higher integrated devices. The challenge for the panel manufacturer is the development and implementation of such an IC in cooperation with the semiconductor supplier. If not done carefully the solution will not reduce the overall solution cost or can't provide the expected performance and reliability. This paper discusses the key considerations to successfully develop and integrate a highly integrated LCD bias IC into the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.519-524
• /
• 1992

In this paper, an operating system is designed for NC controllers. Host computer is the IBM-PC, and the controller panel is designed in graphics mode to look easily for users. Pull-down menu is selected, which is useful to minimize a mistake made by users, so users can use NC controller more effectively. Also, many functions are proposed, such as NC editor for programming the NC program directly, simulation function for testing editted NC program, and new key-pad that appropriates for the functions of OS.

• 소성∙가공
• /
• 제24권4호
• /
• pp.248-255
• /
• 2015

The warm drawing of magnesium alloy AZ31B sheet is affected by temperature because tensile elongation is changed due to the elevated temperature. In the current study, the effect of temperature was investigated for an automotive dash panel part by both experimental and FE analysis. Tensile tests were performed to obtain mechanical properties for various temperatures. AZ31B alloy sheet shows increased total elongation with increasing deformation temperature in the range of 200 to 300℃. The heating channel inserted into the die was used to regulate and to obtain an optimal temperature. A temperature controller was constructed to reduce temperature variation. Warm drawing of magnesium alloy AZ31B was performed to produce the desired shape of the lightweight automotive dash panel. The simulated results showed good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.89-95
• /
• 2000

The engine idle speed mode becomes worse as one drives a vehicle for several years. This is due to ageing of engine and power-train parts. In this case, unstable idle conditions such as engine stall and droop are frequently experienced when the engine gets heavy torque loads due to power steering pump and air conditioning compressor. The objective of this paper is to study on the idle speed control using PID controller under load disturbances. The input of the PID controller is an error of rpm. The output of the PID controller is an ISCV duty cycle. The dSPACE Controller Boards are used to interface with engine. The on-vehicle test is realized using by SIMULINK and BLOCKSETS tools. The real time interface control panel supplied by Control Desk S/W is designed to have good results in engine idle speed control.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.