• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.617-628
• /
• 2016

본 논문은 철도차량의 추진용 유입식 변압기 및 AC/DC 컨버터를 대체하기 위한 지능형 변압기의 구조를 제안한다. 제안된 지능형 변압기는 반도체 스위칭 소자 및 고주파 변압기를 사용한 양방향 전력 변환 컨버터의 형태로써, 기존 변압기에 비해 경량화 되고, 역률 제어 등의 능동적인 제어 성능으로 인해 단상 계통 전원의 효율적인 활용을 가능하게 한다. 제안하는 지능형 변압기는 60Hz 교류 고전압을 직류 고전압으로 변환하기 위한 정류단으로 Neutral point clamped type 의 H-bridge 컨버터를 여러 개 직렬 연결해 구성했다. 직류로 변환된 입력단 전력은 고주파 변압기와 Neutral point clamped type H-bridge 컨버터 2개로 구성된 Dual-Active-Bridge 컨버터를 이용해 출력측에 필요한 저전압을 공급할 수 있도록 했다. 또한, 본 논문에서는 다수의 컨버터 모듈 내부 직류단 전압을 균형제어하며, 단상 교류 전원에서 직류 출력 전원간의 양방향 전력 제어를 가능하게 하는 제어 알고리즘을 제안한다. 제안한 지능형 변압기의 구조 및 제어 시스템은 75kVA 급 3.3kVrms 입력, 750VDC 출력의 지능형 변압기를 설계 및 회로 시뮬레이션 결과를 통해 검증했다.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.550-555
• /
• 2014

The present study deals with the effects of tempering treatment on the microstructure and mechanical properties of Cu-bearing high-strength steels. Three kinds of steel specimens with different levels of Cu content were fabricated by controlled rolling and accelerated cooling, ; some of these steel specimen were tempered at temperatures ranging from $350^{\circ}C$ to $650^{\circ}C$ for 30 min. Hardness, tensile, and Charpy impact tests were conducted in order to investigate the relationship of microstructure and mechanical properties. The hardness of the Cu-added specimens is much higher than that of Cu-free specimen, presumably due to the enhanced solid solution hardening and precipitation hardening, result from the formation of very-fine Cu precipitates. Tensile test results indicated that the yield strength increased and then slightly decreased, while the tensile strength gradually decreased with increasing tempering temperature. On the other hand, the energy absorbed at room and lower temperatures remarkably increased after tempering at $350^{\circ}C$; and after this, the energy absorbed then did not change much. Suitable tempering treatment remarkably improved both the strength and the impact toughness. In the 1.5 Cu steel specimen tempered at $550^{\circ}C$, the yield strength reached 1.2 GPa and the absorbed energy at $-20^{\circ}C$ showed a level above 200 J, which was the best combination of high strength and good toughness.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2006

The effects of microstructure on the damping capacity and tensile properties of 316L stainless steel were investigated. Increasing the degree of cold working, the volume fraction of $\varepsilon-martensite$ decreased after rising to maximum value at specific level of cold working, the volume fraction of d-martensite slowly increased and then dramatically increased from the point of decreasing $\varepsilon-martensite$ volume fraction. Increasing the degree of cold working, the behnvior of damping capacity is similar to that of the $\varepsilon-martensite$. After the damping capacity showing the maximum value at about $20\%$ of cold rolling, damping capacity was decreased with the volume fraction of $\varepsilon-martensite$. Tensile strength was proportional to the volume fraction of d-martensite, and elongation steeply decreased in the range low volume fraction of a'-martensite, then slowly decreased in range the above $10\%$ volume fraction of d-martensite. The damping capacity and elongation is strongly controlled by the volume fraction of $\varepsilon$ martensite with liner relationship. However, the effect of the volume fraction of d-martensite and austenite phase on the damping capacity was not observed. Tensile strength was governed by the volume fraction of d-martensite.

• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.849-855
• /
• 2010

본 논문은 자유회전 테일핀을 갖는 커나드 유도 미사일에 대해 Falanga의 회전율 계산식을 자유회전 테일핀에 적용하여 자유회전 테일핀의 roll lock-in 현상을 예측하였다. 예측 결과의 정확도를 확인하기 위하여 Blair의 풍동시험 결과와 비교하여 검증하였다. 자유회전 테일핀의 회전율 계산 시에 필요한 테일핀의 롤링 모멘트는 풍동시험 결과를 이용하였고 롤 댐핑 모멘트는 missile DATCOM을 이용하여 계산하였다. 이를 자유회전 테일핀의 회전율 계산식에 대입하여 자유회전 테일핀의 회전율 및 Roll lock-in 현상을 예측하였으며 풍동시험 결과와 비교하였다. 검증결과, 자유회전 테일핀의 회전율 및 Roll lock-in 현상 예측 결과가 풍동시험 결과와 잘 일치하는 것을 확인 할 수 있었다.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.166-172
• /
• 2010

현재 전기철도에서는 고성능 유도전동기를 사용하고 있어서 열차속도제어를 위해 벡터제어를 이용하고 있다. 또한 최근에 인버터와 제어이론의 개발로 인해 다양한 방법으로 유도전동기 제어가 가능하다. 현재 유도 전동기를 사용하는 철도차량은 교류전동기를 이용한 역행, 역상제동 및 회생제동 등이 가능하다. 따라서 다양한 방법을 적용하기 위해서는 모터블록과 유도전동기의 모델이 필요하다. 유도전동기의 제어 방법으로는 가변 전압운전, 가변주파수 운전을 통하여 유도전동기의 토크와 회전수를 제어한다. 철도차량 추진시스템은 많은 서브시스템을 가지고 있어 속도제어 성능을 해석하기가 매우 복잡하다. 본 논문에서는 유도전동기를 사용하는 철도차량 추진시스템을 대상으로 Matlab/Simulink를 이용한 속도제어 특성을 분석하였고, 일정시간에 부하에 대한 외란입력응답 특성을 해석하였다. 또한 철도차량 추진시스템의 속도제어 특성을 해석하기 위해 전류, 속도, 자속추정기 및 유도전동기 모델을 제시하였다.

• 열처리공학회지
• /
• 제3권1호
• /
• pp.34-41
• /
• 1990

Effects of grain size and cold rolling degree on shape memory ability and transformation temperature were studied in Fe-35% Mn-6% Si shape memory alloy. Md point of the alloy was determined by variation of yield stress with test temperature. The Md point measured in this way was linearly increased with increasing grain size. Shape memory ability of the alloy was decreased with increasing grain size, showing a minimum value at around $63{\mu}m$, and then increased with increasing grain size. From this result, it was concluded that the shape memory ability in the grain size smaller than a critical value is controlled by amount of retained ${\gamma}$ and prior ${\varepsilon}$ phase, but that the shape memory ability in the grain size greater than the critical value is mainly dominated by grain boundary area in unit volume of parent phase. The shape memory ability was decreased with increasing deformation degree. This was because the ${\gamma}$ content being available for the formation of ${\varepsilon}$ martensite during bending was decreased with increasing deformation degree.

• 열처리공학회지
• /
• 제28권2호
• /
• pp.75-81
• /
• 2015

Effects of B and Cu additions on the microstructure and mechanical properties of high-strength bainitic steels were investigated in this study. Six kinds of high-strength bainitic steels with different B and Cu contents were fabricated by thermo-mechanical control process composed of controlled rolling and accelerated cooling. The microstructures of the steels were analyzed using optical and transmission microscopy, and the tensile and impact tests were conducted on them in order to investigate the correlation of microstructure with mechanical properties. Depending on the addition of B and Cu, various low-temperature transformation products such as GB (granular bainite), DUB (degenerated upper bainite), LB (lower bainite), and LM (lath martensite) were formed in the steels. The addition of B and Cu increased the yield and tensile strengths because of improved hardenability and solid solution strengthening, but decreased the ductility and low-temperature toughness. The steels containing both B and Cu had a very high strength above 1.0 GPa, but showed a worse low-temperature toughness of higher DBTT (ductile-to-brittle transition temperature) and lower absorbed energy. On the other hand, the steels having GB and DUB showed a good combination of tensile and impact properties in terms of strength, ductility, yield ratio, absorbed energy, and DBTT.

• 한국지반환경공학회 논문집
• /
• 제15권4호
• /
• pp.13-27
• /
• 2014

Catchments soil erosion, one of the most serious problems in the mountainous environment of the world, consists of a complex phenomenon involving the detachment of individual soil particles from the soil mass and their transport, storage and overland flow of rainfall, and infiltration. Sediment size distribution during erosion processes appear to depend on many factors such as rainfall characteristics, vegetation cover, hydraulic flow, soil properties and slope. This study involved laboratory flume experiments carried out under simulated rainfall in a 3.0 m long ${\times}$ 0.8 m wide ${\times}$ 0.7 m deep flume, set at $17^{\circ}$ slope. Five experimental cases, consisting of twelve experiments using three different sediments with two different rainfall conditions, are reported. The experiments consisted of detailed observations of particle size distribution of the out-flow sediment. Sediment water mixture out-flow hydrograph and sediment mass out-flow rate over time, moisture profiles at different points within the soil domain, and seepage outflow were also reported. Moisture profiles, seepage outflow, and movement of overland flow were clearly found to be controlled by water retention function and hydraulic function of the soil. The difference of grain size distribution of original soil bed and the out-flow sediment was found to be insignificant in the cases of uniform sediment used experiments. However, in the cases of non-uniform sediment used experiments the outflow sediment was found to be coarser than the original soil domain. The results indicated that the sediment transport mechanism is the combination of particle segregation, suspension/saltation and rolling along the travel distance.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.524-529
• /
• 2017

The effect of strain aging on the tensile properties of API X70 linepipe steel was investigated in this study. The API X70 linepipe steel was fabricated by controlled rolling and accelerated cooling processes, and the microstructure was analyzed using optical and scanning electron microscopes and electron backscatter diffraction. Strain aging tests consisting of 1 % pre-strain and thermal aging at $200^{\circ}C$ and $250^{\circ}C$ were conducted to simulate U-forming, O-forming, Expansion(UOE) pipe forming and anti-corrosion coating processes. The API X70 linepipe steel was composed of polygonal ferrite, acicular ferrite, granular bainite, and bainitic ferrite whose volume fraction was dependent on the chemical composition and process conditions. As the thermal aging temperature increased, the steel specimens showed more clearly discontinuous type yielding behavior in the tensile stress-strain curve due to the formation of a Cottrell atmosphere. After pre-strain and thermal aging, the yield and tensile strengths increased and the yield-to-tensile strength ratio decreased because yielding and aging behaviors significantly affected work hardening. On the other hand, uniform and total elongations decreased after pre-strain and thermal aging since dislocation gliding was restricted by increased dislocation density after a 1 % pre-strain.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.331-339
• /
• 2003

Thermo Mechanical Control Process(TMCP) 강재는 열간압연시에 압연 온도를 제어하면서 경우에 따라 압연직후 냉각, 열처리하여 안정된 조직으로 압연, 제조된 강재이다. 본 연구에서는 극후판 TMCP강재의 소재특성과 건축구조용 강재로서의 적합성과 특성을 밝히기 위하여 화학성분 및 조직특성, 내력 및 기계적 특성, 사용성 및 인성, 등으로 분류하여 소재특성과 용접특성을 분석하였다. 실험결과, 대상강재는 극후판에서도 설계기준강도를 만족하고 낮은 탄소당량 ($C_{eq}$) 및 용접갈라짐 감수성조성($P_cm$)과 저항복비 등이 확보되었다. 또한, 기준온도(${\pm}0^{\circ}C$)는 물론 $-60^{\circ}C$의 극저온에서도 충분한 충격흡수에너지값으로 양호한 인성의 소재특성을 나타냈고, 용접부에서도 경화현상이 저감되고, 용접부의 인성 및 내력이 충분한 것으로 나타났다.