• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.447-455
• /
• 2011

To investigate the effects of the improvement of postharvest quality on fresh tomato, antimicrobial microperforated (AMP) films were prepared and their antimicrobial abilities were observed. AMP films were made by coating different types of natural antimicrobial agents such as cinnamon, clove, and clary sage essential oils into microperforated (MP) films. Cinnamon essential oil of 10% (v/v) has proven to be very effective as inhibitor of the mold growth on tomato, compared to the clove and clary sage essential oils. Quality changes of fresh tomatoes packed using the natural AMP films (AMP10 and AMP30) and MP films (MP10 and MP30) during storage were evaluated. Total microbial growth, weight loss, firmness, lycopene content, and decay rate as the major quality parameters were monitored over 9 days at $15^{\circ}C$. The oxygen transmission rates and mechanical properties between the natural AMP and MP films were also compared. There was no significant difference in change of oxygen transmission rate, tensile strength and elongation between the AMP and MP films. For storage studies, the freshness of tomato packaged in AMP30 film was higher than that in OPP film (the control), MP10, MP30, and AMP10 films. Especially, AMP30 film exhibited high efficiency compared to the control for tomato decay during storage periods. Based on the results, the microperforation and antimicrobial properties of the packaged films may significantly affect the maintenance of an optimum gas composition within the package atmosphere for increasing the storage life and quality of produce. They were also effective on the inhibition of microbial growth by controlled release of antimicrobial agent at an appropriate rate from the package into the tomato. Natural antimicrobial agent coating microperforated films could use potential functional package as a method of extending the freshness of postharvest tomato for storage.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2013

This study investigated the oxidative stability of oils when dough was fried under a lower pressure than the ambient atmosphere. The pressure during the frying process was controlled at measures of 760, 560, 360 or 160 mmHg. The oil containing the dough was heated at $180^{\circ}C$ for 48 hours. Rancidity values, including acid value, peroxide value, fatty acid analysis, color changes, and browning of oil samples, were measured every 8 hours. As the frying process continued at all 4 pressure levels, the acid values (AV) increased. However, compared to the other pressure levels, the increase in AV was the least at 160 mmHg. In addition, the peroxide value at 160 mmHg was only 0.81 meq/kg compared to 1.52 meq/kg at 760 mmHg. For all pressure levels, stearic acid, oleic acid, ${\omega}$-6 linolenic acid were increased, while linoleic acid and ${\omega}$-3 linolenic acid were decreased. In terms of color, a-values representing redness were decreased, whereas b-values were increased as the frying proceeded. These results revealed that the oxidation of frying oil was decreased under reduced pressure condition. Thus, the usage of frying oil may be extended, owing to less oxidative concerns. This leads to a lower cost to the manufacturer, and furthermore, helps the environment by reducing industrial wastes.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.871-876
• /
• 1998

'Yeobong' strawberries were stored at $2^{\circ}C$ under controlled atmosphere (CA) containing the combinations of $O_2{\;}(3.8%)$ and $CO_2{\;}(10,{\;}15,{\;}20%)$ and air as control. Atmospheres of $3%{\;}O_2+15%{\;}CO_2$ and $8%{\;}O_2+15%{\;}CO_2$ reduced respiration and ethylene production rates. Fruits kept under CA conditions of 10% and 15% $CO_2$ were harder than those stored under 20% $CO_2$ and air. The CA conditions of 10% or 15% $CO_2$ maintained approximately 80% of vitamin C for 24 days. Redness were increased and then decreased, but the changing trends were not clear among the storage conditions. Anthocyanin contents in $3%{\;}O_2+15%{\;}CO_2$ and $8%{\;}O_2+15%{\;}CO_2$ were slightly increased for 16 days and then decreased thereafter, while anthocyanin content in air was rapidly increased for 8 days. After 16 days of storage, off-flavor were perceived in all CA storage. And strawberries stored in 20% $CO_2$ conditions were unacceptable after 20 days. The 20% $CO_2$ significantly affected off-flavor of strawberries, but there was no significant difference between 10% $CO_2$ and 15% $CO_2$ conditions. Ethanol which is in relation to off-flavor was higher with elevated $CO_2$ levels. Although CA conditions under $3%{\;}O_2+15%{\;}CO_2$ was effective in delaying the quality changes, there was high ethanol content compared to $8%{\;}O_2+15%{\;}CO_2$ condition. Strawberry kept under $8%{\;}O_2+15%{\;}CO_2$ was maintained the shelf-life for 24 days and the condition prolonged more $4{\sim}8$ days and 12 days than the other CA conditions and air, resectively.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.799-806
• /
• 2012

This experiment was conducted to establish the optimum conditions for high $CO_2$ gas treatment in combination with a proper gas-permeable packaging film to maintain the quality of fig fruit (Ficus carica L). Among the fig fruits with different high $CO_2$ treatments, the quality change was most effectively controlled during storage in the 70%-$CO_2$-treated fig fruit. Harvested fig fruit was packaged using microperforated oriented polypropylene (MP) film to maintain the optimum gas concentrations in the headspace of packaging for the modified-atmosphere system. MP film had an oxygen transmission rate of about $10,295cm^3/m^2$/day/atm at $25^{\circ}C$. The weight loss, firmness, soluble-solid content (SSC), acidity (pH), skin color (Hunter L, a, b), and decay ratio of the fig fruits were monitored during storage at 5 and $25^{\circ}C$. The results of this study showed that the OPP film, OPP film + 70% $CO_2$, and MP film+70% $CO_2$ were highly effective in reducing the loss rate, firmness and decay occurrence rate of fig fruits that were packaged with them during storage. In the case of using treatments with packages of OPP film and OPP film+70% $CO_2$, however, adverse effects like package bursting or physiological injury of the fig may occur due to the gas pressure or long exposure to $CO_2$. Therefore, the results indicated that MP film containing 70% $CO_2$ can be used as an effective treatment to extend the freshness of fig fruits for storage at a proper low temperature.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.31-40
• /
• 2021

The hydrogen in nominally anhydrous mineral is known to be associated with lattice defects, but it also can exist in the form of water and hydroxyl groups on the large surface of the nanoscale particles. In this study, we investigate the effectiveness of 1H solid-state nuclear magnetic resonance (NMR) spectroscopy as a robust experimental method to quantify the hydrogen atomic environments of amorphous silica nanoparticles with varying relative humidity. Amorphous silica nanoparticles were packed into NMR rotors in a temperature-humidity controlled glove box, then stored in different atmospheric conditions with 25% and 70% relative humidity for 2~10 days until 1H NMR experiments, and a slight difference was observed in 1H NMR spectra. These results indicate that amount of hydrous species in the sample packed in the NMR rotor is rarely changed by the external atmosphere. The amount of hydrogen atom, especially the amount of physisorbed water may vary in the range of ~10% due to the temporal and spatial inhomogeneity of relative humidity in the glove box. The quantitative analysis of 1H NMR spectra shows that the amount of hydrogen atom in amorphous silica nanoparticles linearly increases as the relative humidity increases. These results imply that the sample sealing capability of the NMR rotor is sufficient to preserve the hydrous environments of samples, and is suitable for the quantitative measurement of water content of ultrafine nominally anhydrous minerals depending on the atmospheric relative humidity. We expect that 1H solid-state NMR method is suitable to investigate systematically the effect of surface area and crystallinity on the water content of diverse nano-sized nominally anhydrous minerals with varying relative humidity.