• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.109-114
• /
• 2007

Oudemansiella radicata, edible and medicinal mushroom belonging to Agaricales of Basidiomycota, has been known to exhibit outstanding curative effects on the fungal infection and hypertension caused by high blood pressure. Neutral saline soluble (0.9% NaCl), hot water soluble and methanol soluble substances (hereinafter referred to Fr, NaCl, Fr. HW and Fr. MeOH, respectively) were extracted from fruiting body of the mushroom. In vitro cytotoxicity test showed that Fr. NaCl was not cytotoxic against NIH3T3 and Sarcoma 180 at the concentration of $10{\sim}1,000\;{\mu}g/ml$. Intraperitoneal injection with Fr. NaCl exhibited antitumor activity with life prolongation effect of $42.9{\sim}66.7%$ in mice inoculated with Sarcoma 180. Fr. NaCl improved the immunopotentiating activity of B lymphocyte by increasing the alkaline phosphatase activity by $1.4{\sim}3$ folds compared with controlled and LPS groups, respectively. Intraperitoneal injection with Fr. MeOH increased the numbers of peritoneal exudate cells and circulating leukocytes by 3.5 and 2.5 folds, respectively. Therefore, the antitumor effect exhibited on mouse Sarcoma 180 cells was likely due to immune-modulating activity of crude polysaccharides extracted from fruiting body of O. radicata.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Journal of Ginseng Research
• /
• v.31 no.2
• /
• pp.109-116
• /
• 2007

Korean red ginseng has broad efficacious effects against hypertension, diabetes, nociception, and cancer, and it counteracts weakness. It has been reported that Korean red ginseng is able to normalize blood pressure, improve cholesterol and lower blood glucose levels. We have recently reported that Korean red ginseng extract (KRGE) significantly prevented rat carotid arterial thrombosis in vivo, and inhibited platelet aggregation ex vivo and in vitro in a dose-dependent manner. The purpose of this study was to examine the effects of KRGE on blood circulation in human by measuring ex vivo platelet aggregation, plasma coagulation and serum lipid profiles in healthy volunteers. Subjects were randomly divided into three groups (placebo-group, KRGE-low dose group, KRGE-high dose group). Administration of KRGE to subjects significantly inhibited ADP-induced platelet aggregations both in KRGE-low dose group from $72.79{\pm}20.53$ to $62.00{\pm}23.06%$ (p=0.0009), and in KRGE-high dose group from $75.14{\pm}21.86$ to $64.52{\pm}24.72%$ (p=0.0039), respectively. Administration of KRGE to subjects also significantly inhibited collagen-induced platelet aggregations both in KRGE-low dose group from $85.52{\pm}12.57$ to $79.62{\pm}20.47%$ (p=0.0916), and in KRGE-high dose group from $80.24{\pm}18.11$ to $70.31{\pm}25.93%$ (p=0.0565), respectively. Whereas, KRGE has no significant effects on coagulation system, such as prothrombin time (PT) and activated partial thromboplastin time (APTT), and serum lipid profiles, such as total cholesterol, low density lipoprotein cholesterol, high density lipoprotein cholesterol and triglyceride. KRGE also has no significant effects on hematological and serum biochemical profiles. These results suggest that KRGE has a potential to improve blood circulation through antiplatelet activity in human, and KRGE intake may be beneficial for the individuals with high risks of thrombotic and cardiovascular diseases.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.6
• /
• pp.590-596
• /
• 2001

The hallmarks of sleep apnea syndrome include daytime hypersomnolence, snoring, obesity, disturbed nocturnal sleep, and apneic episodes. Thyroid deficiency states are now a well recognized cause of sleep apnea. Central, obstructive, and mixed patterns of sleep apnea may be observed in hypothyroidism. A-33-yr-old man was admitted complaining of daytime hypersomnolence, snoring, sleep apnea and obesity. A polysomnogram showed obstructive pattern of sleep apnea syndrome. Physical examination and hormonal study revealed a narrowing of the upper airway and primary hypothyroidism. Dilated cardiomyopathy was diagnosed by echocardiogram. The poctients was treated for obstructive sleep apnea syndrome with nasal continuous positive airway pressure(CPAP) for 2 months and the underlying hypothyroidism with thyroid hormone therapy. This successfully controlled the snoring, sleep apnea, and other apnea-related symptoms. Here, we describe our experience of nasal CP AP and thyroid hormone therapy in a patient with primary hypothyroidism associated with obstructive sleep apnea syndrome and dilated cardiomyopathy with review of the relevant literature.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.206-212
• /
• 2018

As many consumers prefer good quality food, farms have used various facilities to cultivate products for satisfying their desires. Among them, the most representative facilities are plastic and glass multi-span greenhouse. The height of both plastic greenhouse and glass greenhouse is around three meters high in Korea. As a result, the crop productivity is limited. The solution is to increase the height of the greenhouses to improve the greenhouses' environment. The device for raising columns consists of a stop device, a pneumatic cylinder, and a vertical member. Pneumatic cylinders were designed with a diameter of 160 mm and a stroke length of 50 mm, taking into consideration the safety factor of 1.5. In addition, the air flow was controlled by nozzle to achieve a time of less than 30 seconds per stroke. It was calculated that $21.5L{\cdot}min^{-1}$ of air was needed to complete in less than 30 seconds. Accordingly, the diameter of the nozzle is designed to be 0.5 mm. When the pressure was 0.9 MPa, the average raising force was 13,805N, which was close to the calculated value of 15,612N. The field test results show that any inconsistency in the row columns was not generated. and that it is considered applicable to the actual glass and plastic greenhouses.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2013

Satellite's infrared detector shall be calibrated under thermal vacuum environment using a reference black body before a launch. The full aperture black body (FABB) as an infrared calibration reference shall be composed of vacuum compatible materials and temperature controlled from $-40^{\circ}C$ to $+40^{\circ}C$ with emissivity higher than 0.95. The temperature homogeneity over the central 80 % area of the FABB front surface shall be better than 2 K. The FABB designed by thermal and flow analysis was $1m{\times}1m{\times}8mm$ copper plate on which black painted aluminum honeycomb core was attached. Copper tubes were welded on the opposite side of the honeycomb core to allow temperature regulated gaseous nitrogen to flow through them. By the FABB validation test, the temperature homogeneity was observed around 1 K using 20 PT100 sensors and modified COTS infrared camera. The emissivity value was 0.975 at $40^{\circ}C$ under atmospheric pressure.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.2
• /
• pp.171-181
• /
• 1995

Ovarian hyperstimulation syndrome(OHSS) is one of the well-known complication of controlled ovarian hyperstimulation(COH). Though there have been numerous measures to prevent the occurrence of OHS, it has not been completely preventable until now. The fluid shift from the intravascular space to the third space is due to decreased oncotic pressure of the serum. The objective of this study was to evaluate if IV administration of 20% albumin in those patients with OHSS risk can make prevention of severe OHSS. We retrospectively analysed 70 patients undergoing IVF-ET who had serum peak estradiol($E_2$) level of >2,500 pg/ml and/or the number of oocytes retrieved over 20. The treatment group(n=39) received albumin while the control group(n=31) did not. After 40 grams of human albumin diluted in 1,000 ml of 0.9% sodium chloride solution, the treatment group received half of the fluid during oocyte retrieval, the remainder in the recovery suite. The results were as follows; There were significant differences in the levels of serum peak $E_2$ and number of oocytes retrieved between the two groups(p<0.05). However, there were no significant differences in the incidence of OHSS and pregnancy rate or multifetal pregnancy rate. In conclusion, administration of albumin to OHSS risk patients did not reduce the rate of OHSS in IVF-ET. However, if we consider the fact that there were differences in the level of peak serum $E_2$ and oocyte numbers, further prospective study may be needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7990-8000
• /
• 2015

Plant factories are plant cultivation systems which produce farm products uniformly under the controlled environmental condition regardless of seasons and places. Thermal flow in the plant factory is an important parameter in cultivating plants. In this research, we study thermal flow characteristics for a hybrid plant factory with multi-layer cultivation shelves using computer simulation techniques. In order to obtain numerical solutions for thermal flow characteristics, a finite volume method was applied. We consider a low-Reynolds-number ${\kappa}-{\epsilon}$ turbulence model, incompressible viscous flows, and pressure boundary conditions for numerical simulation. Commercial software Solid Works Flow Simulation is then used to investigate characteristics of thermal flows in the plant factory applying several different inflow air velocities and arrangements of cultivation shelves. From numerical analysis results, we found that temperatures in cultivation shelves were uniformly distributed for Case 3 when the inflow air velocity was 1.6 m/s by using a blower in the plant factory. However in Case 1 lower temperature distributions were observed in test beds, TB2 and TB3, which indicated that additional temperature control efforts would be required. Average shelf temperature increased by $3^{\circ}C$ using artificial light source (DYLED47) with 50% blue and 50% red LED ratios. Korea Academia-Industrial cooperation Society.

• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.163-169
• /
• 2009

Many biological systems are regulated by an intricate set of feedback loops that oscillate with a circadian rhythm of roughly 24 h. This circadian clock mediates an increase in body temperature, heart rate, blood pressure, and cortisol secretion early in the day. Recent studies have shown changes in the amplitude of the circadian clock in the hearts and livers of streptozotocin (STZ)-treated rats. It is therefore important to examine the relationships between circadian clock genes and growth factors and their effects on diabetic phenomena in animal models as well as in human patients. In this study, we sought to determine whether diurnal variation in organ development and the regulation of metabolism, including growth and development during the juvenile period in rats, exists as a mechanism for anticipating and responding to the environment. Also, we examined the relationship between changes in growth factor expression in the liver and clock-controlled protein synthesis and turnover, which are important in cellular growth. Specifically, we assessed the expression patterns of several clock genes, including Per1, Per2, Clock, Bmal1, Cry1 and Cry2 and growth factors such as insulin-like growth factor (IGF)-1 and -2 and transforming growth factor (TGF)-${\beta}1$ in rats with STZ-induced diabetes. Growth factor and clock gene expression in the liver at 1 week post-induction was clearly increased compared to the level in control rats. In contrast, the expression patterns of the genes were similar to those observed after 5 weeks in the STZ-treated rats. The increase in gene expression is likely a compensatory change in response to the obstruction of insulin function during the initial phase of induction. However, as the period of induction was extended, the expression of the compensatory genes decreased to the control level. This is likely the result of decreased insulin secretion due to the destruction of beta cells in the pancreas by STZ.