• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• 한국환경과학회지
• /
• 제15권12호
• /
• pp.1093-1101
• /
• 2006

In the present study we studied the growth, photosynthetic traits and protective mechanisms against oxidative stress in the primary loaves of cucumber (Cucumis sativus L.) seedlings with or without UV-B treatment. Cucumber seedings were irradiated with UV-B for 10 days in environment-controlled growth chambers. The primary leaves irradiated with UV-B showed reduction in leaf length and decreased biomass production. The reduced biomass production seemed to be due to a negative effect of UV-B radiation on the photosynthetic process. Changes in chemical properties of leaf, such as chi a/b ratio affected photosynthesis. UV-B significantly affected chl b content compared with chi a in the light harvesting complex resulting reduced photosynthetic activity Fv/Fm decreased with an UV-B stress, suggesting that the photosynthetic apparatus, and particularly, PS II was damaged under UV-B stress. Malondialdehyde(MDA) concentration which represents the state of membrane lipid peroxidation Increased significantly under UV-B stress confirming an oxidative stress. UV-B exposure with SA solution(0.1-1.0 mM) can partially ameliorated some of the detrimental effects of UV-B stress. Leaf injuries including loss of chlorophyll and decreased ratio of Fv/Fm were reduced with combined application of UV-B and SA. ABA and JA showed similar mode of action in physiological effects on photosynthetic activities though the levels were lower than those from SA treated plants. Chloroplast ultrastructure was also affected by UV-B exposure. The thickness of leaf tissue components decreased and the number of grana and thylakoids was reduced in chloroplast applied UV-B or SA alone. At combined stress granal and stromal thylakoids were less affected. The leaves under combined stress acquired a significant tolerance to oxidative stress. From these results, it can be suggested that SA may have involved a protective role against UV-B induced oxidative damage.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1755-1760
• /
• 2016

Automation of greenhouses has proved to be extremely helpful in maximizing crop yields and minimizing labor costs. The optimum conditions for cultivating plants are regularly maintained by the use of programmed sensors and actuators with constant monitoring of the system. In this paper, we have designed a prototype of a smart greenhouse using Arduino microcontroller, simple yet improved in feedbacks and algorithms. Only three important microclimatic parameters namely moisture level, temperature and light are taken into consideration for the design of the system. Signals acquired from the sensors are first isolated and filtered to reduce noise before it is processed by Arduino. With the help of LabVIEW program, Time domain analysis and Fast Fourier Transform (FFT) of the acquired signals are done to analyze the waveform. Especially, for smoothing the outlying data digitally, Moving average algorithm is designed. With the implement of this algorithm, variations in the sensed data which could occur from rapidly changing environment or imprecise sensors, could be largely smoothed and stable output could be created. Also, actuators are controlled with constant feedbacks to ensure desired conditions are always met. Lastly, data is constantly acquired by the use of Data Acquisition Hardware and can be viewed through PC or Smart devices for monitoring purposes.

• 한국수산과학회지
• /
• 제9권1호
• /
• pp.61-68
• /
• 1976

전복의 조기채묘기술개발을 위하여 전복의 생식소 조기성숙에 관여하는 요인과 채란성적을 생태적입장에서 조사검토하였다. 수온조절, 광주기조절, 단순사육등의 실험구 배치를 한 4개의 실내사육 수조와 해중에 수하한 축양용 대바구니를 사용하여 1975년 4월 24일부터 6월 23일까지 60일간 인공사육한 한전복과, 충무시 앞바다의 죽도에서 채포한 자연산 한전복을 모패로 사용하며, 동년 6월에 산란유발하여 그 채란성적을 비교 고찰하였다. 1. 한전복 생식소 성숙에 관여하는 생태적 요인은 수은보다 조도환경이라고 보아진다. 2. 낮의 최대 조도가 2,000lux이하의 어두운 수로에서 60일 이상 모패를 사육함으로써 좋은 성적으로 조기채묘가 가능했다.

• The Plant Pathology Journal
• /
• 제21권3호
• /
• pp.207-213
• /
• 2005

Cultural, morphological and pathogenic variation in Indian isolates of Ascochyta rabiei, the causal agent of blight of chickpea, was investigated. Fungal isolates representative of seven agroclimatic regions in north western plain zones (NWPZ) of India showed variation in colony colour as mouse gray with green hue, light mouse gray with slate gray centre and gray with dark brown centre, when grown on chickpea dextrose agar (CDA). Conidiomatal color of the isolates varied from brown to slate gray and black. The number of conidiomata and conidia formed on CDA ranged from 49.7 to 90.7 and $5.5\times10^4\;to\;3\times10^5cm^{-2}$, respectively. The size of conidiomata and conidia of A. rabiei isolates varied from $274\times232{\mu}m\;to\;156\times116{\mu}m$, and from $14.0\times6.2{\mu}m\;to\;10.7\times4.6{\mu}m$, respectively. Fourteen A. rabiei isolates from the seven agroclimatic regions of NWPZ were evaluated for their virulence on 180 chickpea genotypes in controlled environment. Cluster analysis based on the disease rating on a 1-9 scale indicated higher similarity coefficient (> 0.65) between isolates from different agroecological regions, while few isolates from the same region had less similarity. The 14 isolates were grouped into eight pathotypes at > 0.5 similarity coefficient. Sixteen genotypes were identified as probable differentials to distinguish A. rabiei isolates.

• 한국수산과학회지
• /
• 제44권6호
• /
• pp.658-664
• /
• 2011

Rotifers of the genus Brachionus are commonly used as a live food for larval fish, and rotifers of different sizes are preferred according the mouth size of the fish. Rotifer species vary in size, and individual size can depend on the temperature and salinity of the rearing environment. We investigated the effects of temperature and salinity for two species, B. plicatilis (250-300 ${\mu}m$) and B. rotundiformis (100-220 ${\mu}m$). Two strains of B. plicatilis (CCUMP 36 and 48) and two strains of B. rotundiformis (CCUMP 51 and 56) were received from the Culture Collection of Useful Marine Plankton (CCUMP) at Pukyong National University and cultured with the green alga, Nannochloris oculata (KMMCC 16) from the Korea Marine Microalgal Culture Center (KMMCC). The growth and size of rotifers were examined at three water temperatures ($16^{\circ}C$, $24^{\circ}C$, $32^{\circ}C$) and four salinities (20 psu, 25 psu, 30 psu, 35 psu) under continuous light (40 ${\mu}molm^{-2}s^{-1}$). The maximum density and growth rate of B. rotundiformis were greater than those of B. plicatilis. The lorica length of B. plicatilis ranged from 215.4 to 269.7 ${\mu}m$ and from 154.9 to 206.6 ${\mu}m$ for B. rotundiformis, depending on strain, temperature and salinity. Rotifers were smaller when cultured at high temperatures, regardless of salinity. B. rotundiformis preferred higher salinity than B. plicatilis. The results demonstrated that the size of rotifers could be controlled to some extent by temperature and salinity.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.276-279
• /
• 2009

최근 선박의 안전과 작업환경 개선을 위해 선박 자동화 시스템을 도입하고 있다. IMO에서 표준기술 및 안전관리측면의 규제를 강화하여 해상안전과 해상 화재 방지를 위하여 노력을 하고 있으나 해양사고와 선박화재는 계속 발생하고 있다. 본 논문에서는 선박의 화재에서 Robot을 이용하여 Risk에 대응하고 관리하는 연구를 하였다. Robot의 Risk대응을 위한 화재 감지 센서를 부착하고, Robot에서 장착되어 수행되는 적외선 센서, TOUCH SWITCH, 소리감지 센서, 가스 감지 센서, 빛감지 센서를 이용하여 Robot을 컨트롤 하였으며, Robot에게 Risk 대응을 지시 할 때의 소리출력 사용과 DC MOTOR의 속도와 COM SEN에 Low~High 값을 설정하여 Robot의 Risk 대응관리 동작을 설정하였다.

• 보존과학회지
• /
• 제35권1호
• /
• pp.19-31
• /
• 2019

To study the cleaning effects and post-treatment stability assessment of various methods of cleaning textiles with metal thread, six naturally-soiled historical textiles with metal thread were investigated at the Metropolitan Museum of Art, New York. Prior to the cleaning of fabricated gold, silver, and copper thread that had been glued onto a paper substrate, the artificial deterioration was carried out in a controlled environment with light(UV and daylight), and temperature and humidity factors which would weaken and damage the samples. A synthetic soil mixture was applied to the samples to imitate soil found on the historic and archaeological textiles with metal thread; the cleaning effect and post-treatment assessment were investigated by use of three textile cleaning methods: mechanical cleaning, wet cleaning, and solvent cleaning. While investigating the naturally-soiled textiles with metal thread, it was determined that the soil colors and sizes of contaminating particles of each textile were different due to the diversity of original environmental factors and conditions. After cleaning with kneaded rubber, Stoddard solvent, n-decane or n-hexane, a bright, clean effect was apparent. Kneaded rubber was successful in picking up both large and small particles, but its stickiness caused some of the metal leaf to peel off. Stoddard solvent produced a good cleaning effect, but after use of n-hexane and n-decane in the cleaning process, a white layer of residue remained on the textile's surface. Wet cleaning was not effective and the rapid humidity changes between wet and dry conditions caused the edges of the paper substrate to lose their original shape.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 한국식품영양과학회지
• /
• 제22권3호
• /
• pp.359-366
• /
• 1993

Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.