• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.8-14
• /
• 2013

In the subway, various fires continue to take place across the world. In the Daegu subway accident in 2003, many people were damaged by shortened visibility range caused by toxic gas and smoke. This paper, assuming that a subway fire happens in the Mandeok Station of the subway system in Busan, analyzed different smoke-spreading situations depending on the ventilation situation at its platform (opening of the train doors, operation of ventilation facilities in the tunnel, and working of fire door), using FDS. The calculation proved that it would be more effective to secure evacuation route when the ventilation facilities of the tunnel are not operated, than when they are on. And, it was also found that the case where the doors of the platform to the escape route and only the platform-facing doors of the subway car on fire office are open would be more effective to ventilation than the case where all the doors are open. And, it was found to be important that the fire doors of the platform are working properly.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.73-81
• /
• 2011

As high speed digital systems continue to use components with faster edge rate and clock speeds, transmission of the digital information, it can bring about many troubles. The increasing requirement for controlled impedance PCBs becomes both a critical success factor and a design challenge to implement a system. Especially, the noise sources in high frequency digital systems include the noise in power supply, ground and packaging, and they destroy the fidelity of signals. Therefore PCB design with impendence matching is needed to improve fidelity of signal in H/W. In this paper, we have developed an impedance control and analysis tool for multi-layer PCB design, and simulates the tracks controlled impedance with the test coupon. So, it can save the design time and support the economical PCB design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.970-976
• /
• 2010

Platform convergence originated from the convergence of broadcast and telecommunication is making rapid progress including IT and not-IT fields in order to provide a variety of converged services, S/W eco-system construction, and so on. With the advent of convergence environment, IEEE 802.15.4-based RF4CE technology is rising because of creating momentum for the market using converged connectivity between home and office devices as well as all around located devices. In this paper, we present enhanced RF4CE key seed distribution approach in order to provide efficient connection and control between devices. The proposed approach consists of device mutual authentication, initial vector assignment, and two-phase key seed distribution. Moreover, we make a development real RF4CE test board and its key agreement simulator to verify the proposed approach.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2336-2338
• /
• 2000

고효율, 무공해의 신발전 기술인 연료전지 발전은 발전 용량 및 스택구성에 따라 차이가 있으나 기본적으로 저전압, 대전류 특성과 부하에 따라 발전 전압이 크게 변동하는 특성을 갖는 직류전원으로써 이를 상용으로 이용하기 위해서는 연료전지 발전 전력을 안정된 전력으로 변환하여 주는 장치가 필요하며, 이러한 전력 변환장치가 연료전지 발전의 최종 출력 전원의 질을 결정한다. 연료전지 전력변환장치는 전압조절기능, 승압 기능을 가져야 하고, 연료전지 본체와 부하를 안정하게 운전하기 위해 전력변환장치 뿐만 아니라 부하와 연료전지 본체의 운전상태 감지 기능, 각종 장치의 보호와 제어기능을 가져야 한다. 본 논문의 목적은 자동차용 연료전지 출력 전력변환장치의 종합제어장치의 설계를 위해 연료전지 스택시뮬레이터를 개발하는 것이다. 연료전지 스택 시뮬레이터는 연료전지 발전 특성과 일치하는 전력을 출력해 주는 직류전원 공급장치로써 이를 이용하여 연료전지 출력 전력변환장치의 종합제어장치를 충분한 예비실험과 수정, 보완함으로써 연료전지용 전력변환 시스템의 성능개선, 안정성 향상 등을 가질 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.297-304
• /
• 2011

MIMO wireless communication embedded systems, and for propagation prediction for indoor and outdoor propagation prediction program incorporates an indoor/outdoor propagation through the simulator can be predicted. This analysis technique developed by the interference between multiple transmitters and a maximum transmission distance issues, the frequency utilization efficiency for a variety of issues, including analysis and prediction becomes possible. Development of the prediction of the conventional methods, but I can consider the environmental characteristics of the ray tracing simulation software to develop and implement an efficient ray tracing, ray tracing techniques and are designed to enable tracked beam analysis of propagation characteristics using information technology by combining the theoretical characteristics of an efficient and well-reflected propagation prediction technique was employed. The frequency of domestic embedded systems, ensure the frequency characteristics and frequency of 3-5GHz band for propagation to investigate the development of local wireless communication technology-based skills needed for securing and jeonpaganseopdeung frequency management techniques to ensure the verification and verified through experiments.

• Journal of Biomedical Engineering Research
• /
• v.43 no.1
• /
• pp.27-34
• /
• 2022

Drunk driving defines a driver as unable to drive a vehicle safely due to drinking. To crack down on drunk driving, alcohol concentration evaluates through breathing and crack down on drinking using S-shaped courses. A method for assessing drunk driving without using BAC or BrAC is measurement via biosignal. Depending on the individual specificity of drinking, alcohol evaluation studies through various biosignals need to be conducted. In this study, we measure biosignals that are related to alcohol concentration, predict BrAC through SVM, and verify the effectiveness of the S-shaped course. Participants were 8 men who have a driving license. Subjects conducted a d2 test and a scenario evaluation of driving an S-shaped course when they attained BrAC's certain criteria. We utilized SVR to predict BrAC via biosignals. Statistical analysis used a one-way Anova test. Depending on the amount of drinking, there was a tendency to increase pupil size, HR, normLF, skin conductivity, body temperature, SE, and speed, while normHF tended to decrease. There was no apparent change in the respiratory rate and TN-E. The result of the D2 test tended to increase from 0.03% and decrease from 0.08%. Measured biosignals have enabled BrAC predictions using SVR models to obtain high Figs in primary and secondary cross-validations. In this study, we were able to predict BrAC through changes in biosignals and SVMs depending on alcohol concentration and verified the effectiveness of the S-shaped course drinking control method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.53-64
• /
• 2024

The Yeongnam southeastern region, with Ulsan as its focal point, is planning large-scale floating offshore wind power projects. Additionally, due to the establishment of new nuclear power plants and the extension of existing ones, there is a demand for the expansion of the power grid. The government has announced plans to establish a new power grid for this region as part of the 10th power supply plan. However, there are anticipated challenges in the actual construction phase, primarily because of the presence of national parks and cultural heritage protection zones near Gyeongju. As a result, this study presents an alternative approach that minimizes the creation of new power lines by utilizing existing ones. Using the Power System Simulator for Engineers (PSS/E), an analysis of transient stability was conducted and demonstrated its feasibility.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.185-196
• /
• 2007

The aim of this research is to develop a signal control algorithm using internal metering to minimize total delay that vehicles go through, in case a network is oversaturated. To calculate total delay on the network, the authors first detect vehicles' arrivals and departures in the network through the detecting system, and chase the vehicles' flow in the links with a platoon dispersion model. Following these, the authors calculate the queue length in all the inks of the network through the chase of vehicles, deduce the stopped time delay, and finally convert the stopped time delay to the approach delay with a time-space diagram. Based on this calculated delay, an algorithm that calculates the level of the internal metering necessary to minimize the deduced approach delay is suggested. To verify effectiveness of this suggested algorithm, the authors also conduct simulation with the micro-simulator VISSIM. The result of the simulation shows that the average delay per vehicle is 82.3 sec/veh and this delay is lower than COSMOS (89.9sec/veh) and TOD (99.1sec/veh). It is concluded that this new signal control algorithm suggested in this paper is more effective in controlling an oversaturated network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.24-35
• /
• 2012

In this paper, we propose a dynamic lane control scheme with a traffic predictor module and a rate controller for reconciling with commercial optical PHY modules in energy efficient optical Ethernet systems. The commercial high speed optical Ethernet system capable of 40/100Gbps employs 4 or 10 multiple optical transceivers over WDM or multiple optical links. Each of the transceivers is always turned on even if the link is idle. To save energy, we propose the dynamic lane control scheme. It allows that several links may be entirely turned off in a low traffic load and frames are handled on the remaining active links. To preserve the byte order even if the number of active links may be changed, we propose a rate controller to be sat on the reconciliation sublayer. The main role of the controller is to insert null byte streams into the xGMII of inactive lanes. For the PHY module, the null input streams corresponding to inactive lanes will be disregarded on inactive PMDs. It is very handy to implement the rate controller module with MAC in FPGA without any modification of commercial PHYs. It is very crucial to determine the number of active links based on the fluctuated traffic load, we provide a simple traffic predictor based on both the current transmission buffer size and the past one with different weighting factors for adapting to the traffic load fluctuation. Using the OMNET++ simulation framework, we provide several performance results in terms of the energy consumption.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.74-81
• /
• 2024

In the near future, autonomous ships, ships controlled by shore remote control centers, and ships operated by navigators will coexist and operate the sea together. In the advent of this situation, a method is required to evaluate the safety of the maritime traffic environment. Therefore, in this study, a plan to evaluate the safety of navigation through ship control simulation was proposed in a maritime environment, where ships directly controlled by navigators and autonomous ships coexisted, using autonomous operation technology. Own ship was designed to have autonomous operational functions by learning the MMG model based on the six-DOF motion with the PPO algorithm, an in-depth reinforcement learning technique. The target ship constructed maritime traffic modeling data based on the maritime traffic data of the sea area to be evaluated and designed autonomous operational functions to be implemented in a simulation space. A numerical model was established by collecting date on tide, wave, current, and wind from the maritime meteorological database. A maritime meteorology model was created based on this and designed to reproduce maritime meteorology on the simulator. Finally, the safety evaluation proposed a system that enabled the risk of collision through vessel traffic flow simulation in ship control simulation while maintaining the existing evaluation method.