• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1695-1705
• /
• 2005

Reaction wheels and thrusters are commonly used for the satellite attitude control. Since satellites frequently need fast maneuvers, the minimum time maneuvers have been extensively studied. When the speed of attitude maneuver is restricted due to the wheel torque capacity of low level, the combinational use of wheel and thruster is considered. In this paper, minimum time optimal control performances with reaction wheels and thrusters are studied. We first identify the features of the maneuvers of the satellite with reaction wheels only. It is shown that the time-optimal maneuver for the satellite with four reaction wheels in a pyramid configuration occurs on the fashion of single axis rotation. Pseudo control logic for reaction wheels is successfully adopted for smooth and chattering-free time-optimal maneuvers. Secondly, two different thrusting logics for satellite time-optimal attitude maneuver are compared with each other: constant time-sharing thrusting logic and varying time-sharing thrusting logic. The newly suggested varying time-sharing thrusting logic is found to reduce the maneuvering time dramatically. Finally, the hybrid control with reaction wheels and thrusters are considered. The simulation results show that the simultaneous actuation of reaction wheels and thrusters with varying time-sharing logic reduces the maneuvering time enormously. Spacecraft model is Korea Multi-Purpose Satellite (KOMPSAT)-2 which is being developed in Korea as an agile maneuvering satellite.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.99-104
• /
• 1995

For the robust control, sliding mode control has gained a great attention. Sliding mode control has the good robustness, because it makes the state of system reach the origin of the state space, by a varying the structure of system on the sliding surface. The slope of sliding surface affects to the control performance. If it is small, robustness is increased at the expense of reaching time. On the contrary, if it is large, reaching time is decreased at the expense of robustness and overshoot. In this paper, to design the optimal sliding surface, optimal control theory is introduced. To confirm the validity of the proposed method, the position control of step motor is implemented.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.82-85
• /
• 2004

This paper proposes the development of delay compensator to minimize performance degradation caused by time delays in network-based real-time control systems. The delay compensator uses the time-stamp method as a direct delay measuring method to measure time delays generated between network nodes. The delay compensator predicts the network time delays of next period in the views point of time delays and minimizes performance degradation from network through considering predicted time delays. Control output considering network time delays is generated by the defuzzification of probable time delays of next period. The time delays considered in the delay compensator are modeled by using a timed Petri net model. The proposed delay prediction mechanism for the delay compensator is evaluated through some simulation tests by measuring deviation of the predicted delays from simulated delays.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.11
• /
• pp.1040-1044
• /
• 2012

We design a NCS (Networked Control System) where the communication between sensors and controllers takes place over a USN (Ubiquitous Sensor Network). In order to measure time delays between sensors and controllers in real time, we design an algorithm to measure RTT (Round Trip Time) between USN nodes, and implement it into TinyOS of USN. By using the measured time delays, we construct the Smith predictor to compensate the time delays between sensors and controllers in real-time. For the real time experiment, we simulate the dynamic plant model, controller, and USN interface using Real-Time Windows Target provided in MATLAB. The USN interface in the Simulink model consists of serial ports, which connect the plant output and controller with USN nodes. The experiment results show that the time delays between sensors and controllers are precisely measured in real time; the Smith predictor appropriately compensates the time delays; and the stability is achieved in the closed-loop of the NCS.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.425-428
• /
• 2000

A new dead time compensation method using time delay control approach is presented. The dead time in switching pattern cause the voltage distortion and it can be considered as the disturbance voltage. In this paper the disturbance voltage is estimated using time delay control and the estimated disturbance voltage is summed with voltage command in predictive current control by a feed-forward. The proposed scheme is implemented on a PMSM and the effectiveness is verified through comparative simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.26-31
• /
• 1998

For the semiactive vibration control, a variable damper and proper control systems are essential. In this research, a controllable damper was designed using the MR fluids and its mechanical properties such as damping constant and response time were measured. Since the response time of the MR damper was much longer than nominal MR fluid response time, the time delay of the damper should be considered in the design of controllers. It is shown that the advanced On/Off vibration control which includes the damper time delay performs more effectively than the conventional one.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.580-583
• /
• 2003

The general time optimal control law provides the optimal solution for a minimum time control problem. But in most real systems with disturbances and model uncertainties, the time optimal control law leads to chattering effect. This chattering effect can cause the system to be unstable. Therefore, we propose a robust optimal control algorithm for the nonlinear second order systems with model uncertainty. The proposed algorithm is combined with bang-bang control and sliding mode control. Thus the proposed algorithm has two state space regions to implement to control algorithm. In each region, the appropriate linear or nonlinear feedback control law is used satisfying the dynamic system equations. Simulation results show the superiority of the proposed controller in comparison with pure time optimal control(bang-bang control).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.78-101
• /
• 2017

High-quality industrial control is critical to ensuring production quality, reducing production costs, improving management levels and stabilizing equipment and long-term operations. WiFi-based Long Distance (WiLD) networks have been used as remote industrial control networks. Real-time performance is essential to industrial control. However, the original mechanism of WiLD networks does not minimize end-to-end delay and restricts improvement of real-time performance. In this paper, we propose two algorithms to obtain the transmitting/receiving phase cycle length for each node such that real time constraints can be satisfied and phase switching overhead can be minimized. The first algorithm is based on the branch and bound method, which identifies an optimal solution. The second is a fast heuristic algorithm. The experimental results show that the execution time of the algorithm based on branch and bound is less than that of the heuristic algorithm when the network is complex and that the performance of the heuristic algorithm is close to the optimal solution.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.154-160
• /
• 2003

Uncertain time delay happens when the process reads the sensor data and sends the control input to the plant located at a remote site in distributed control system. As in the case of data network using TCP/IP, VDN that integrates both device network and data network has uncertain time delay. Uncertain time delay can cause degradation in performance and stability of distributed control system based on VDN. This paper first investigates the transmission characteristic of VDN and suggests a control scheme based on the Smith's predictor to minimize the effect of uncertain varying time delay. The validity of the proposed control scheme is demonstrated with real-time velocity control of DC servo motor located in remote site.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.946-961
• /
• 2004

A new adaptive controller which combines a model reference adaptive controller (MRAC) and a fuzzy controller is developed for unstable nonlinear time-invariant systems. The fuzzy controller is used to analyze and to compensate the nonlinear time-invariant characteristics of the plant. The MRAC is applied to control the linear time-invariant subsystem of the unknown plant, where the nonlinear time-invariant plant is supposed to comprise a nonlinear time-invariant subsystem and a linear time-invariant subsystem. The stability analysis for the overall system is discussed in view of global asymptotic stability. In conclusion. the unknown nonlinear time-invariant plant can be controlled by the new adaptive control theory such that the output error of the given plant converges to zero asymptotically.