• 대한한방소아과학회지
• /
• 제18권1호
• /
• pp.63-75
• /
• 2004

Objective: Atopic dermatitis has a close relationship with degranulation of mast cell and separation of histamine. As there was no experiment with herb, using Lithospermum erythrorhizon, We investigated experimental influence of Lithospermum erythrorhizon on degranulation of mast cell and separation of histamine in Sprague-Dawley rats. Methods: The SD rats were classified into three groups. One group was a normal one treated by normal saline before medical treatment. The other was a control group prescribed to Compound 48/80 before normal saline treatment. And the third was a expenimental group prescribed to compound 48/80 after medical treatment of Lithospermum erythrorhizon. Then, We investigated the experimental results by measuring the degree of degranulation and separation of histamine. Results: Lithospermum erythrorhizon did obviously inhibit the degree of degranulation of mast cell(p<0.05). Lithospermum erythrorhizon inhibited the separation of histamine in the plasma. Conclusion: Lithospermum erythrorhizon may be one of the effective therapeutic regimens on atopic dermatitis.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.201-210
• /
• 1999

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.73.2-79
• /
• 2003

The purpose of this study is to provide the basic data on the optimum method for interfacial separation for an effective recycle of concrete waste by using the thermal properties of concrete. Therefore, this study is proceeded by dividing the interface of concrete into cement paste and fine aggregates or mortar and coarse aggregate, considering the aspect of recycled cement and aggregate as the recycling use of concrete waste. As results of the experiment, in case of recycle cement, the interfacial separation is easily appeared, but it is shown that the mixed amount of powder included in fine aggregate doesn't greatly decrease. But, in case of recycle coarse aggregate, the effect of interfacial separation by preliminary heating is predominant. Especially, the bonding rate of mortar is the lowest when it is heated 5 times for 120 minutes at $300^{\circ}C$. Hence, it is considered that it will be an excellent effect of quality control when the results of this study is applied to a manufacturing system of recycle coarse aggregate which is about to put into practical use.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.7-12
• /
• 2000

A new speech enhancement algorithm for speech corrupted by slowly varying additive colored noise is suggested based on a state-space signal model. Due to the FIR structure and the unimportance of long-term past information, the receding horizon (RH) FIR filter known to be a best linear unbiased estimation (BLUE) filter is utilized in order to obtain noise-suppressed speech signal. As a special case of the colored noise problem, the suggested approach is generalized to perform the single blind signal separation of two speech signals. It is shown that the exact speech signal is obtained when an incoming speech signal is noise-free.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.979-983
• /
• 1993

A power operated (0.5 hp electric motor) grain flour separator was designed and developed for separation of grain (wheat, corn, chickpea and soybean) flour it no various fractions based on the size of the particles of the product. The separator is made of mild steel and consists of a hopper, power driven agitating mechanism, feed control , cylindrical separator unit and an eccentric mechanism. The machine was tested for wheat (variety : Subjata) flour separation into four fraction, viz : semolina ; Gr-I and II, flour (coarse) and white (fine) flour. Wheat samples (6.8% m.c., db) were first pearled by CIAE pearler for 15.8% bran removal . The product and machine characteristics were determined at different capacities varying from 24 kg/h to 143 kg/h. It was found that 76 kg/h capacity gave reasonably best results in terms of purity and recovery of semolina vis-a-vis the market product. The energy requirement of the machine at no-load was found to be 230 w and at load conditio s, it varied between 36.3-6.4kj per kg of feed separation. The machine could be used by small flour millers, small/medium size traders and retailers and other processors for making available various flour products of different particle size in the market for ready use fo the consumers.

• KSBB Journal
• /
• 제20권3호
• /
• pp.197-204
• /
• 2005

이상 랩온어칩에서 사용된 생물분리 방법과 그 예를 소개하였다. 랩온어칩에서는 수백 마이크로미터 이하의 미세 채널을 사용하므로 유사한 크기의 채널을 사용하는 capillary electrophoresis에서 사용되었던 기법들이 가장 많이 활용되어왔으며, 랩온어칩 내에서 물질분리를 위한 기본 방법으로 적용되어왔다. 현재까지 CE에 사용되었던 기법들은 모두 랩온어칩 상에 구현된 바 있으며, 이러한 기술들은 랩온어칩의 활용 가능성 및 활용 분야 증대에 크게 기여하였다. 이외에도, laminar flow의 특성을 이용하거나, 막을 제작하거나, 추출 기법을 활용하는 등의 다양한 시도가 있었다. 그러나, high-throughput, 이동형 장비를 지향하는 랩온어칩에서 고전압을 사용하는 경우 활용에 제약을 가져올 수 있어, 용도에 맞는 적절한 분리기술의 개발 및 선택이 랩온어칩의 활용 가능성을 결정짓는 중요한 요인이 될 것으로 판단된다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.65-69
• /
• 2006

물제트분사장치가 부착된 NACA-0021 익 주변의 흐름을 업자영상유속계를 이용하여 고찰하였다. $R_e=6.0261\times10^4$에서 영각 (a) 을 $0^{\circ}\sim35^{\circ}$로 변화시켜가며, 물제트분사 속도를 0[m/s], 9.2[m/s] 의 2 가지로 조절한 결과 익 후류영역에서는 박리 후 비정상적인 (unsteady) 재순환 재부착 영역이 형성되었으며, 박리영역의 폭이 콴다 효과 (Coanda effect)를 갖는 물제트분사로 인하여 최대 1/3만큼 감소하는 경향을 확인하였다. 물분사가 없는 조건에서의 박리는 영각(a) $17^{\circ}\sim18^{\circ}$부근에서 시작되는 것이 관측되었으나, 물제트분사를 시켰을 경우 $20^{\circ}\sim21^{\circ}$에서 박리가 시작되는 것을 유통관측을 통해 알 수 있었다. 유통계측을 통해 익의 후연부 (trailing edge) 에서 생성되었던 와 (vortex, eddy) 가 물제트분사로 인해 소멸되는 것을 알 수 있었고, 영각이 작고 물분사 유속이 빠를 수록 박리영역의 감소가 더욱 가속화됨을 알 수 있었다.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.15-20
• /
• 2024

소형 무인항공기의 활용 분야가 군사용 및 민수용으로 확장됨에 따라 운용 안전성 및 공역의 경제 효율적 이용을 위한 연구의 필요성이 증가하였다. 본 연구에서는 저고도에서 비행하는 소형 무인항공기의 안전 운용을 위한 최소 분리 거리 산출을 수행하였다. 최소 분리 거리 산출에는 소형 무인항공기의 총 시스템 오차 분석이 필요하므로 민감도 분석을 통해 비행 기술 오차 요인을 선별하였다. 소형 무인항공기의 비행 데이터는 실제 소형 무인항공기의 비행 제어기와 비행 시뮬레이션 프로그램을 연동하여 획득하였다. 이를 기반으로 소형 무인항공기의 운용 시나리오를 설정하고 각 시나리오의 최소 분리 거리를 산출하였다. 이를 통해 실제 무인 소형 무인항공기의 안전 운용에 필요한 최소 분리 거리 산출치의 활용 방법을 제시하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.306-306
• /
• 1999