• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.423-430
• /
• 2009

Recently as the inactive response characteristics of the existing RCD used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper confirms the unreliability of the existing RCD by electrical fault simulator and proposes a EFDPD by using semiconductor switching devices and a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the self circuit breaker in EFDPD rapidly cuts off the system. The proposed EFDPD confirms the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disasters, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2976-2983
• /
• 2013

Interest in reducing standby power is increasing because of electric power shortages. Most of electric equipment are in standby state that does not use a function of the original, most electronic devices consume a lot of electric power even in standby mode. In many countries, research on the smart plug is advanced in order to prevent power consumption due to standby state. However, due to the nature of the function, expensive in many case. These smart plugs would be to cut the standby power using motion detecting sensor or pattern control of the user. Theses features have no advantages because of malfunction of motion detecting sensor and in accordance with the diversification ot user's pattern. In this study, developing a multi-smart plug system that linked with bluetooth function of user's smart phone. Using smart phone bluetooth function, determination of the position of the user. The suggestion smart plug cutting the standby power of the electronic apparatus. It was confirmed that it is able to reduce the power consumption according to the location of the user.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.2
• /
• pp.66-77
• /
• 2012

Objectives: This study was designed to investigate the effects of PR on ovarian tissue in PCOS rats through measurement of morphological and histo-pathological observations, ovarian size. In addition, effects on expression levels of Insulin like Growth Factor Receptor(IGFR) were also investigated to elucidate related mechanisms. Methods: PCOS was induced by single intermuscular injection with ${\beta}$-Estradiol 17-Valerate(EV) in female rats. Normal group(NOR, n=8) were injected with sesame oil and administrated hard food for five weeks. Control group(CTL, n=8) were injected with EV and administrated hard food for five weeks. CR group(n=8) were injected with EV and administrated hard food mixed CR for five weeks. Then, we measured weights of body and ovary, uptakes of food and water. And we observed morphological and histo-pathological changes of ovary, levels of IGFR. Results: In this experiments, single injection of Estradiol Valerate(EV) induced suppression of weight gain, formation of cysts, increase of IGFR expression. Oral administration of PR prevent decrease of ovarian size significantly. Further more, formation of cystic follicles induced by EV injection is suppressed by PR treatment. Conclusions: These results suggest PR can be used for patients with PCOS to prevent formation of cystic follicles and malfunction of ovary.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.127-135
• /
• 2014

Interactive-typed devices and contents that have been often applied in the field of entertainment and game are the technology that allows you to maximize the enjoyment and participation of users through the interaction of each. In this paper, we designed an interactive-typed smartphone app that is based on the Android platform, implemented the wearable Bluetooth device to control via a interactive interface with a vibration sensor and three-axis acceleration sensor. We tested the functionality and 3-axis motion's operability by using smartphone app, interface interactive-typed device that has been developed, prove useful as a wearable Bluetooth device that has the convenience of the user. Further, it is shown that by implementing the optimized protocol of the sensor data transfer over Bluetooth, it is possible to reduce the malfunction of the content of the smart phone.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.382-391
• /
• 2019

The naval combat system is a distributed system in which various subsystems are integrated and operated together. The integrated management system(IMS) is a software system for systematically and consistently managing the application software which control and operate various devices in such a combat system. Since the malfunction or failure of such an IMS can disable the entire combat system, the IMS is more important than other application software of the combat system. In this paper, we propose a method to guarantee the stable and correct operation of the combat system. To this end, we propose a redundancy scheme composed of one leader and several followers so as to tolerate the failure situation of the IMS. We also propose a leader selection algorithm to select a new leader when the leader fails and can no longer perform its role. To verify the validity of the study, we verify the fault tolerance behavior of the system and the accuracy of the leader selection algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.4
• /
• pp.457-466
• /
• 2021

This paper describes the design of model-based fault diagnosis software to apply to the propulsion system in tracked amphibious assault vehicle which consists of an engine, a transmission, a cooling system, and two waterjets. This software includes specific functions to detect the failures regarding sensor malfunctions, mechanical malfunctions, control errors, and communication errors. This software generates the proper malfunction codes which are classified as the warning and caution. In order to validate the fault diagnosis software, the manual and automatic test are performed using the test program with 32 test cases. Test results show that the designed fault diagnosis software is reliable and effective for applying to the propulsion system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2021

The distributing board in directly installed on the ground or the bottom surface of the building, and when vibrations such as earthquakes or external shocks occur, the possibility of damage or malfunction of electric components such as internal power devices, wiring, and protection relays increases. Recently, the need for a seismic type distributing board is increasing, and research and development of a distributing board having a vibration damping function and product launch are being conducted. In this paper, an IoT-based data collection device system capable of measuring vibration and environmental data of distributing board was designed and implemented. When vibration occurred on the distributing board, data was stored and visualized in the MySQL DB through Node-RED for monitoring and data storage using the MQTT protocol for reliable messaging transmission. The test was conducted by attaching the IoT device of the distributing board, and data was collected in real-time and monitored through Node-RED.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.52-59
• /
• 2022

Currently, Korea is an aging society and is expected to become a super-aged society in about four years. X-ray devices are widely used for early diagnosis in hospitals, and many X-ray technologies are being developed. The development of X-ray device technology is important, but it is also important to increase the reliability of the device through accurate data management. Sensor nodes such as temperature, voltage, and current of the diagnosis device may malfunction or transmit inaccurate data due to various causes such as failure or power outage. Therefore, in this study, the temperature, tube voltage, and tube current data related to each sensor and detection circuit of the diagnostic X-ray imaging device were measured and analyzed. Based on QC data, device failure prediction and diagnosis algorithms were designed and performed. The fault diagnosis algorithm can configure a simulator capable of setting user parameter values, displaying sensor output graphs, and displaying signs of sensor abnormalities, and can check the detection results when each sensor is operating normally and when the sensor is abnormal. It is judged that efficient device management and diagnosis is possible because it monitors abnormal data values (temperature, voltage, current) in real time and automatically diagnoses failures by feeding back the abnormal values detected at each stage. Although this algorithm cannot predict all failures related to temperature, voltage, and current of diagnostic X-ray imaging devices, it can detect temperature rise, bouncing values, device physical limits, input/output values, and radiation-related anomalies. exposure. If a value exceeding the maximum variation value of each data occurs, it is judged that it will be possible to check and respond in preparation for device failure. If a device's sensor fails, unexpected accidents may occur, increasing costs and risks, and regular maintenance cannot cope with all errors or failures. Therefore, since real-time maintenance through continuous data monitoring is possible, reliability improvement, maintenance cost reduction, and efficient management of equipment are expected to be possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.400-407
• /
• 2016

The purpose of this study is to propose a useful method of solving the problem of thermal stability in surge protection devices (SPDs). First of all, the existence of the problem in the developed SPDs was confirmed by experiment. After analyzing the problem, a useful method of solving it is proposed and implemented. An experiment is performed to verify the performance of the implemented device. The results of this study are as follows; it is revealed that the problem of the thermal stability results from the varistor, one of the components in the SPD. A varistor with a built-in thermal fuse is applied to the SPD for the purpose of solving the problem. The experimental results confirmed that the thermal stability was improved by replacing the varistor. As a result of this study, the reliability of radar control units is enhanced and the probability of malfunction is reduced.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.141-151
• /
• 2011

This paper suggests the Facility Management System for plant factory promising to be a core technology of the agriculture in the future. This system makes diagnoses that status from sensors or facilities in the factory for exact operation and monitors the internal environment with the control status in real-time. It is expected that we could operate a plant factory safely and effectively by using the system. The system consists of the data management module, the context provider module, the context interpreter module, the service provider module, the data storage and user interface. The system provide with the failure diagnosis service, the facility control service, and the high-reliability monitoring service via the interactions between above modules. The failure diagnosis service determines whether the sensors or facility devices are in failure or not, and informs the administrator of their conditions. The facility control service is activated in case if the facilities need to be managed during the diagnosis for failure or malfunction processes. The high-reliability monitoring service provides the administrator with verified data through the failure diagnosis service. Then we confirmed that the suggested system operates correctly through the system simulation.