• 공학교육연구
• /
• 제20권4호
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.

• 정보처리학회논문지D
• /
• 제11D권2호
• /
• pp.461-470
• /
• 2004

반도체 업계에서는 200mm 반도체 웨이퍼 생산공정이 300mm 웨이퍼 생산공정으로 바뀜에 따라, 300mm 반도체 웨이퍼를 이동시키는 로봇을 모니터링하고 시뮬레이션하기 위한 소프트웨어 개발이 필요하다. 이런 소프트웨어는 독립적으로 동작하는 것이 아니라 MCS와 하위 시스템인 로봇과 통신하면서 실행되어야 하므로, 그 구성이 복잡하다. 그러므로, 이 시스템을 체계적으로 개발하기 위해서는 객체지향 개발 방법론인 UML을 적용할 필요성이 있다. 본 논문은 반도체 웨이퍼를 생산공정에서 이동시키는 로봇을 모니터링하고 시뮬레이션하기 위한 소프트웨어 개발에 UML 프로세스를 적용하였다. UML을 적용하여 UML을 기반으로 한 개발 프로세스 정의와 개발 단계별 업무들에 대한 구체적인 산출물들을 만들어 내었다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.147-149
• /
• 2003

Automatic monitoring and controling system, especially DO and MLSS was faciliated for the nitrogen and phosphorus removal efficiencies. Removal efficiency of nitrogen and phosphorus by automatic monitoring and controling system, especially DO and SRT was have well adopted. and so it will be possible to use artificial intelligence logic control software such as fuzzy or neuro logic control system for WWT Plant.

• 대한의용생체공학회:의공학회지
• /
• 제44권6호
• /
• pp.363-376
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.The purpose of this study is to conduct a usability assessment to ensure that ergonomic design has been applied so that the ventilator central monitoring system can improve user satisfaction, efficiency, and safety. The rapid spread of COVID-19, which began in 2019, caused significant damage global medical system. In this situation, the need for a system to monitor multiple patients with ventilators was highlighted as a solution for various problems. Since medical device software is closely related to human life, ensuring their safety and satisfaction is important before their actual deployment in the field. In this study, a total of 21 participants consisting of respiratory staffs conducted usability test according to the use scenarios in the simulated use environment. Nine use scenarios were conducted to derive an average task success rate and opinions on user interface were collected through five-point Likert scale satisfaction evaluation and questionnaire. Participants conducted a total of nine use scenario tasks with an average success rate of 93% and five-point Likert scale satisfaction survey showed a high satisfaction result of 4.7 points on average. Users evaluated that the device would be useful for effectively managing multiple patients with ventilators. However, improvements are required for interfaces associated with task that do not exceed the threshold for task success rate. In addition, even medical devices with sufficient safety and efficiency cannot guarantee absolute safety, so it is suggested to continuously evaluate user feedback even after introducing them to the actual site.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1324-1327
• /
• 1996

This paper presents an open architecture controller (OAC) for machining systems and describes the OAC testbed at Seoul National University. Because our OAC is designed for fully open systems, it does not depend on any specific hardware or software components. This openness includes software reusability which enables integration of a wide range of monitoring and control features. In addition to openness, our OAC system provides guaranteed real-time performance, an important requirement for advanced manufacturing.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.364-367
• /
• 2004

This paper presents the flight software of KoDSat (KSLV-l Demonstration Satellite) which performs demonstrating the KSLV-l (Korea Space Launch Vehicle-l)'s satellite launch capability. The KoDSat Flight Software executes in a single-processor, multi-function flight computer on the spacecraft, the OBC (On Board Computer). The flight software running on the single processor is responsible for all real-time processing associated with: processor startup and hardware initialization, task scheduling, RS422 handling function, command and data handling including uplink command and down-link telemetry, attitude determination and control, battery state of charge monitoring and control, thermal control processing.

• 한국콘텐츠학회논문지
• /
• 제7권12호
• /
• pp.245-253
• /
• 2007

본 논문은 원격 감시 제어를 위한 효율적인 웹 서비스 S/W 플랫폼을 제안한다. 웹 서비스의 성능 향상을 위해 서블릿 컨테이너를 제거함으로써 웹 서비스 구현의 필수 구성요소인 gSOAP 처리를 향상시켰으며, 로봇 또는 유비쿼터스 센서 응용에 적용이 가능한 경량화 된 웹 서비스 서버/클라이언트 소프트웨어 플랫폼을 설계하였다. 본 연구 결과를 검증하기 위하여 PXA270 프로세서를 탑재한 LDS4000 엔진 보드에 탱크와 센서 등을 결합한 감시 제어용 로봇 하드웨어를 제작하였으며, 웹 서비스 클라이언트 응용과 기존의 웹 서버를 통한 원격 감시 제어 기법 간의 gSOAP 메시지 교환 부하를 비교함으로써 본 연구 결과에 대한 실용적 우수성과 그 효율성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.744-747
• /
• 2000

This paper aims at developing remote control system to control and monitor distribute various devices through internet or information communication network. So far for managing UPS(Uninterruptible Power Supply) serial communication system has been used. This paper proposes managing method of UPS monitoring using SNMP. It consists of SNMP agent network board SNMP manager PC software serial communication software and UPS. The proposed method can be applied to various devices with communication network remotely.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 사면안정
• /
• pp.45-98
• /
• 1993

• 사물인터넷융복합논문지
• /
• 제6권3호
• /
• pp.7-13
• /
• 2020

본 논문에서는 IoT를 기반으로 서버 룸의 환경을 실시간으로 모니터링하며 제어하는 시스템을 제안한다. 최근 정보화 사회가 극대화되면서 컴퓨터 시스템이 다운되었을 때 그 피해가 크다. 특히, 서버 룸의 화재와 같은 피해는 데이터의 손실로 이어지고 데이터 복구가 불가능하게 된다. 이와 같은 피해를 줄이기 위해서 IoT 시스템을 활용하여 실시간 모니터링할 수 있는 노드를 제안하였다. 또한, 노드의 정보를 취합하고 모니터링할 수 있는 코디네이터 노드를 제안하였다. 제안하는 시스템이 동작하는지 확인하기 위해 노드 모니터링 및 에어컨디셔너를 제어할 수 있는 소프트웨어를 개발하였다. 실험 결과 제안하는 시스템이 화재를 감지하고 상황에 따라 에어 컨디셔너를 제어하는 것을 확인하였다.