• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2000

A variable cutting speed control model was developed to be implemented for the flexible disk grinding process Control algorithm was based on the error referred by the discrepancy between current disk angle and intended one that are pro-posed to produce desired resulting depth of cut. Controller was implemented in two different aspect One was to initiate the control law from the beginning while the other was to activate as soon as the disk start to produce ground surface i.e. The beginning of the between edges stage. Several performance analysis were conducted comparing various process parameters such as cutting force disk angle depth of cut and disk speed with respect to process transition time Tentative results revealed that controller implemented from the earlier stages of the process showed better performance than the other revealed that controller implemented from the earlier stages of the process showed better performance that the other.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1577-1583
• /
• 2015

In this research, a combined adaptive-robust current controller is developed for non-minimum-phase DC-DC converters in a wide range of operations. In the proposed nonlinear controller, load resistance, input voltage and zero interval of the inductor current are estimated using developed adaptation rules and knowing the operating mode of the converter for the closed-loop control is not required; hence, a single controller can be employed for a wide load and line changes in discontinuous and continuous conduction operations. Using the TMS320F2810 digital signal processor, the experimental response of the proposed controller is presented in different operating points of the buck/boost converter. During transition between different modes of the converter, the developed controller has a better dynamic response compared with previously reported adaptive nonlinear approach. Moreover, output voltage steady-state error is zero in different conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.221-224
• /
• 1996

Since impact phenomenon is highly nonlinear, the analysis and control of the contact motion has been a challenging subject. Various researches have been carried out mostly for the contact of a rigid robotic manipulator with a stiff and elastic environment. This paper is motivated by a new contact task: the in-circuit test of a printed circuit board. In this process, high speed contact occurs between a rigid probing manipulator and a plastically deformable work environment. A new dynamic model of the impact controlled probing task has been proposed, considering contact with the plastically deformable object. Approaching velocity conditions to avoid an excess of the allowable penetration depth and control the generated impact force properly are derived from the proposed model. The results of the simulation studies are made for various probing conditions and show the validity of the proposed model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1700-1709
• /
• 2006

In this raper we researched on the development methods and design of the B-ISDN protocol embedded IP-PBX System with the computers interconnected by the Internet for the previous telephone exchange and communication. We designed the structure of the user terminal and exchange sewer of the IP-PBX System, defined message and data structure for call control, and designed call control state transition and call control message flows for user's communication. And we researched on the message flows for supplementary services and the call control for multiple calls.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.4
• /
• pp.185-191
• /
• 2005

In this paper, a new approach for the Synchronous Reluctance Motor control which ensures producing Maximum Torque per Ampere(MTPA) over the entire field weakening region is presented. In addition, This paper presents a speed sensorless control scheme of SynRM using artificial neural network. Also, by adjusting the base speed for the field weakening operation according to the flux level, the current and voltage limit, the smooth and precise transition into the field weakening operation can be achieved. The proposed scheme is verified validity through simulation.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.1-6
• /
• 2008

The tilt rotor aircraft has the flight characteristics which takes off vertically like a helicopter and flies forward like an airplane. Especially, the transition process from a helicopter to an airplane mode requires not only the mixing of control inputs but also the stability and controllability augmentation system(SCAS) in order to keep the safe flight because there are compound flight dynamic characteristics of a helicopter and an airplane including non-linearity, uncertainty. This paper describes the design of SCAS in a lateral motion for the tilt rotor aircraft based on the $H_{\infty}$ control method, which was performed from mathematical model with weighting matrix based on the relationship between the $H_{\infty}$ norm and the sensitivity function. Through simulation analysis for the controller designed on the $H_{\infty}$ control theory, it was shown that this method may be applied to the control design of the tilt rotor aircraft.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.3
• /
• pp.308-317
• /
• 2008

This research investigates economic characteristics of 2 of 2 runs rules under the Shewhart $\bar{X}$ control chart scheme. A Markov chain approach is employed in order to calculate the in-control average run length (ARL) and the average length of analysis cycle. States of the process are defined according to the process conditions at sampling time and transition probabilities are derived from the state definitions. A steady state cost function is constructed based on the Lorezen and Vance(1986) model. Numerical examples show that 2 of 2 runs rules are economically superior to the Shewhart $\bar{X}$ chart in many cases.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.102-111
• /
• 2010

This paper presents a design of seat mechanism for multi-postures controllable wheelchair. The possible seat postures are reclining, tilting, standing, which are controlled by four seat mechanisms using four linear actuators. The seat mechanisms designed in this study are reclining, tilting, forward-tilting, and elevation mechanism. Three postures except standing are controlled by corresponding mechanisms, but the standing posture is performed by combination of the reclining and the forward-tilting mechanism. Posture control system is composed of PID controllers and a planner to determine a feasible posture based on a posture transition diagram. Simulation results show that the seat mechanism and its control system are applicable to a multi-postures controllable wheelchair.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.1
• /
• pp.26-33
• /
• 2014

This study addresses the control problem of an unmanned aerial vehicle (UAV) during the transition period when the flying mode changes from hovering to translational motion in the horizontal plane. First, we introduce a compensation algorithm that improves height stabilization and reduces altitude drop. The main principle is to incorporate pitch and roll measurements into the feedforward term of the altitude controller to provide a larger thrust force. To further improve altitude control, we propose the fuzzy logic controller that improves system behavior. Simulation results presented in the paper highlight the effectiveness of the proposed controllers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.150-155
• /
• 2011

In an active noise control systems, an IIR filter may cause a problem in stability beacause of its poles. For IIR filter, its poles goes sometimes out of a unit circle in a z-plane in the transition state, where the adaptive algorithm converges to the optimum value, which causes the system to diverge. Fuzzy LMS algorithm has a better convergence property than conventional LMS algorithms, but is not applicable to IIR filter because of the reasons. Stabilized adaptive algorithm could be improves stability by moving the pole of IIR filer toward the origin forcibly in the transient state, and by introducing forgetting factor to maintain the optimum convergence when it reaches to the steady state. In this paper, We proposed stabilized adaptive fuzzy LMS algorithms with IIR filter structures, for single channel active noise control with ill conditioned signal case. Computer simulations were performed to show the effectiveness of a proposed algorithm.