• 한국항행학회논문지
• /
• 제13권1호
• /
• pp.87-96
• /
• 2009

본 논문에서는 무선통신에서 유한개의 전략집합을 갖는 전력제어 문제를 게임이론을 통하여 분석하였다. 기존의 게임이론을 이용한 전력제어에서는 개방루프 제어에서와 같이 초기전송 전력을 결정하는 연속적인 게임 모델에 국한된 반면, 본 논문에서는 폐루프 전력제어에서와 정해진 전력제어 step size 만큼 전력을 올리거나 내리는 전력제어 문제를 게임 이론의 전형적인 모델 중의 하나인 죄수 딜레마 모형을 이용하여 분석하였다. 분석결과 전력을 올리는 전략이 내쉬 균형임을 증명하였고, 따라서 이와 같은 상황에서는 모든 단말기가 자신의 전력을 향상시키려고 시도하기 때문에 전체 시스템 측면에서는 효율적이지 못하다. 본 논문에서는 인접 셀 간 간섭이 심각한 환경에서 효율적인 전력제어 알고리즘을 구현하기 위하여 게임모형의 효용함수를 새롭게 정의하였고, 그 결과 모든 단말이 자신의 효용함수를 최대화 하려고 노력한다고 하더라도 자신의 송신 전력이 일정한 수준으로 유지될 수 있는 알고리즘을 개발하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 추계학술발표대회
• /
• pp.465-466
• /
• 2009

This paper investigates congestion detection and control strategies for multi-path traffic (CDCM) diss emination in lifetime-constrained wireless sensor networks. CDCM jointly exploits packet arrival rate, succ essful packet delivery rate and current buffer status of a node to measure the congestion level. Our objec tive is to develop adaptive traffic rate update policies that can increase the reliability and the network lif etime. Our simulation results show that the proposed CDCM scheme provides with good performance.

• 대한교통학회지
• /
• 제11권1호
• /
• pp.87-103
• /
• 1993

The subject this paper is the signal control strategy under oversaturated conditions. The nature of traffic control for oversaturation is essentially different from the standard control modes. While under non-saturated situation traffic control is needed for the sake of safety and efficiency, the throughput is essential under oversaturated conditions. Therefore berth objective and strategies differ. For an oversaturated stream the cycle time and the signal offset are thought to be of rather secondary importance. For this case the green split may well be the most important control variable to serve the excessive demand. Up to now, however, most efforts have concentrated on the strategy with the concept which lies just on the extension of Webster's. "Green-split Coordination Strategy for Over-Saturated Networks", presents newly contrived three types of strategies named Forward-coordination, Backward-coordination and Network-coordination respectively and describes the algorithms with the evaluations. The forward coordination strategy treats the forward wave of flow between two signals. The aim is to prevent the outbreak of queue due to the accumulation of temporary excess of demand in near-saturation or saturation flow. The backward coordination strategy treats the backward rave of flow between two signals. The goal is to prevent the waste of green time caused by the exit block at the upstream signal. for this purpose a feedback regulation is provided of the upstream green-split so that the inflow-outflow balance is kept zero. The resultant surplus of green time is alloted to other signal stages. Also here the examination is made of the appropriate value of the feedback control parameter. The network coordination strategy is operated to maximize the network throughput in a specific direction applying a bang-bang control at the bottleneck intersection. This is a type of intervenient control for policy reasons. For this strategy the green-split coordinations, particuarly the backward coordination, are essential as the tactical elements. In order to evaluate the preposed strategies those are compared with the latest existing strategy called saturation-degree-ratio control by the simulation experiments in an assumed 4$\times$4 grid network. The results are satisfactory showing a 10-15% reduction in delays and a 15% increase in network capacity.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.10-22
• /
• 2004

The paper outlines a comprehensive three-step approach to the development of advanced strategies for quality control of a complex machining process. The research framework is a developed concept for Integrated Supervisory Process Control. The promising results obtained demonstrate a non-traditional approach to the deployment of quality and productivity requirements set by the system users, whereby the efficiency and systematization of the development of quality control strategies can be significantly improved.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.148-156
• /
• 2015

Several vendors have recently been actively pursuing the development of integral pressurized water reactors (iPWRs) that range in power levels from small to large reactors. Integral reactors have the features of minimum vessel penetrations, passive heat removal after reactor shutdown, and modular construction that allow fast plant integration and a secure fuel cycle. The features of an integral reactor limit the options for placing control and safety system instruments. The development of instrumentation and control (I&C) strategies for a large 1,000 MWe iPWR is described. Reactor system modeling-which includes reactor core dynamics, primary heat exchanger, and the steam flashing drum-is an important part of I&C development and validation, and thereby consolidates the overall implementation for a large iPWR. The results of simulation models, control development, and instrumentation features illustrate the systematic approach that is applicable to integral light water reactors.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.769-777
• /
• 2016

This work focuses on current sharing between punch-through insulated gate bipolar transistors (IGBTs) connected in parallel and evaluates the mechanisms that allow overall current balancing. Two different control strategies are presented. These strategies are based on the modification of transistor gate-emitter control voltage V_GE by using an active gate driver circuit. The first strategy relies on the calculation of the average value of the current flowing through all parallel-connected IGBTs. The second strategy is proposed by the authors on the basis of a current cross reference control scheme. Finally, the simulation and experimental results of the application of the two current sharing control algorithms are presented.

• 대한전기학회논문지
• /
• 제33권3호
• /
• pp.91-99
• /
• 1984

Time-optimal control for dmping a one-dimensional xenon-induced spatial power oscillations in pressurized water reactor is studied. Linearized system equations describing the spatial xenon oscillations have been derived based on lambda mode analysis. Optimal control strategies, eventually bang-bang controls, have been drawn applying Pontryagins Minimum Principle, subject to a band constraint on available contros strength. Validity of the linearized system equations and optimal control strategies derived has been demonstrated through conputer simulations which incorporate the finite difference method for one dimensional axial geometry, for the soulution of the two-group neutron diffusion equations. The results obtained through computer simulations show that xenon-induced transients can be suppressed successfully with bang-bang control.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.375-382
• /
• 2001

This paper deals with the compensation method of AMD stroke by adopting variable gain feedback control strategy. The gains, generally known to be constant, are designed to have variable values according to the structural responses and the AMD stroke. This strategy has the advantage of compensating AMD stroke under any kind of loadings, on the other hand the conventional strategies work only under the specific loading. The strategy shows that the AMD stroke is compensated to prevent the stroke saturation and the control force is found not affected by the compensating operation while the control force is reduced and the control efficiency is decreased during the compensating operation in the conventional strategies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.538-541
• /
• 2005

Most realistic control systems contain nonlinearities of some form. One nonlinearity commonly found in control systems is a saturating element. If integral control is applied to such a system to eliminate steady state error, an undesired side effect known as integrator windup may occur when lage setpoint changes are made. This effect leads to a characteristic step response with a large overshoot and a very high settling time. To avoid this situation, many different anti-windup strategies have been suggested. But existing strategies remain over shoot and high settling time. This paper proposes a new anti-windup strategy for PI speed controllers. When the speed control system is changed P controller to PI controller. Integrator has an appropriate initial value. This value results over shoot and high settling time. The SIMULINK/MATLAB-based comparative simulation results and experiment results of speed controller have shown its superior control performance to that of a proposed anti-windup speed controller.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1122-1130
• /
• 2016

This paper presents a novel approach for achieving both a tight DC voltage regulation and a power factor control by applying the Reaching Law Sliding Mode Control (RL-SMC) and the conventional Sliding Mode Control (SMC). Applying these strategies on a matrix rectifier (MR) can achieve a unity grid side power factor when the DC load changes widely and it can provide a ripple-free output voltage that is easily affected by distortions of the three-phase ac voltage supply. Furthermore, by employing the reaching law on the SMC can solve the chatting problem of the sliding motion. Comparative Matlab simulations and experimental verifications for these strategies have been presented and discussed in this paper. The results show that by applying the SMC and RL-SMC on a MR can achieve a unity grid side power factor and a regulated ripple-free DC output.