• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.575-579
• /
• 2003

In this paper, we describe a Duplex Power Controller for Control Rod Control System(CRCS). A Duplex Power Controller has the various functions for the reliable operations of Control Rod Drive Mechanism(CRDM). Also we have implemented the diverse functions by utilizing the developed Duplex Power Controller. Due to the developed Duplex Power Controller, we are assured that the commercial operation by this system be made before long.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.393-396
• /
• 2000

Spent fuel rod cutting device should cut a spent fuel rod to an optimal size in order to fast decladding operation. In this paper, for developing spent fuel rod cutting device with cutter blade, rod properties such as dimension and material of zircaloy tube and fuel pellet are investigated at first and then, various methods of existing cutting devices used commercially are investigated and their performance are analyzed and compared. This device is designed to be operated automatically via remote control system considering later use in Hot-Cell (radioactive area) and the mdularization in the structure of this device makes maintenance easy. SUS and Zircaloy-4 are selected as cut material used in the test of spent fuel rod cutting device by cutter blade. In order for constructing the high durable cutter blade, various materials are analyzed in terms of quality, shape, characteristic, and heat treatment, etc. and from these results, spent fuel rod cutting device is designed and manufactured based on the considerations of durability, round shape sustainability of rod cross-section, debris generation, and fire risk, etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.515-520
• /
• 2001

Due to the high power to weight ratio and fast response under heavy load, the hydraulic systems are still applied to the development of many industrial facilities such as heavy duty construction vehicles, aerospace/military weapon actuating systems and motion simulators. Unlike the other actuators, single-rod hydraulic cylinder exhibits a lot different dynamic characteristics between the extending and retracting stroke because of the difference in pressure acting areas. In this research, in order to overcome this nonlinear feature, $H_{\infty}$ optimal controller was designed and implemented with DSP board that was specifically developed for the experiment. From the experimental result, we could confirm that the overall performance of single-rod hydraulic servo system is similar with the results as we expected in the design stage.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.152-159
• /
• 2001

This paper presents a development of the recoil rod pull force measurement system suing the load cell with a sleeve normally available in the recoil system test. The commercial load cell cannot be used in the test of recoil system floating the breach contact point freely in the air. The load cell is designed and manufactured to meet the recoil system test condition. Theoretical analysis and experimental results show that the accuracy of the developed measurement system is within $\pm$0.5%. We notice that the measurement technique proposed in this paper is accurate and useful in the recoil rod pull force measurement of the recoil system.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.704-708
• /
• 2005

In this paper, a simple idea is proposed to change the compliance center of the Remote Center Compliance (RCC) by adjusting the elasticity of the Elastomer Shear Pad (ESP). To vary the elasticity of the ESP, a hole is made in the ESP along its stiffness axis, and a stiffness adjusting rod (SAR) is inserted into the hole. By adjusting the insertion depth of the rod, lateral stiffness of the ESP can be varied, and the compliance center of the VRCC can be controlled accordingly. To verify the effectiveness of the proposed idea, a prototype VRCC is designed and, the position of the compliance center with various lengths of the inserted rod are measured.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 춘계학술발표회
• /
• pp.169-174
• /
• 2007

부표시스템 침수체의 주요형상인 원형실린더에 제어봉을 부착하여 2차원 단면의 유동특성에 대해서 수치해석을 수행하였다. 유속을 0.1m/s에서 0.5m/s로 변화시키면서 부표시스템 주위의 유동현상을 파악하고 부표시스템의 효과적인 유통제어를 위해 실린더 (D=50mm)에 제어봉의 직경을 0.1D 에서 O.5D 까지 부착하여 조류에 의한 영향을 조사하였다. 유동장내의 속도분포는 PIV계측기법 중 2 프레림 입자추적법을 사용하여 수치해석의 정도를 높이고자 0.3m/s에서 비교 평가하였다. 실린더 주위의 압력분포는 0.2D 의 제어봉을 부착하였을 경우, 유속의 변화에 관계없이 가장 양호한 경향을 보이는 것을 알 수 있었다.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.382-390
• /
• 1995

Failure of connecting rod in automotive engine may cause catastrophic situation. The corner radius at small end has an effect on stress raising. To investigate the stress distribution in connecting rod during operation, the finite element analysis was used by giving possible maximum tension and compression. Excessive sizing after forging connecting rod may result in the tensile residual stress which lower the fatigue life and cause premature failures. It was shown that when the sizing amount is too large, the location of high tensile residual stress coincide with that of high stress amplitude during operation through the elastic-plastic finite element analysis. The endurance limit moves down due to the surface finish and decarburization, which combines with the movement of resultant stress points to dangerous range. It was concluded that the precise control of sizing and enough corner radius are necessary to a reliability of connecting rod.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1106-1112
• /
• 2000

In this paper, we present a vision system which measures the cross-section of a hot wire-rod in the steel plant. We developed a mobile vision system capable of accurate measurement, which is strong to vibration and jolt when moving. Our system uses green laser light sources and CCD cameras as a sensor, where laser sheet beams form a cross-section contour on the surface of the hot wire-rod and the reflected light from the wire-rode is imaged on the CCD cameras. We use four lasers and four cameras to obtain the image with the complete cross-section contour without an occlusion region. We also perform camera calibrations to obtain each cameras physical parameters by using a single calibration pattern sheet. In our measuring algorithm, distorted four-camera images are corrected by using the camera calibration information and added to generate an image with the complete cross-section contour of the wire-rod. Then, from this image, the cross-section contour of the wire-rod is extracted by preprocessing and segmentation, and its height, width and area are measured.

• 한국항해항만학회지
• /
• 제31권6호
• /
• pp.485-490
• /
• 2007

부표시스템 침수체의 주요형상인 실린더에 원형 제어봉을 부착하여 2차원 단면의 유동특성에 대해서 수치해석을 수행하였다. 유속을 0.1m/s에서 0.5m/s로 변화시키면서 부표시스템 주위의 유동현상을 파악하고, 부표시스템의 효과적인 유동제어를 위해 실린더 (D=50mm)에 제어봉의 직경을 0.1D 에서 0.5D까지 부착하여 조류에 의한 압력분포를 조사하였다. 유동장내의 속도분포는 PIV 계측기법 중 2프레림 입자추적 법을 사용하여 수치해석의 정도를 높이고자 0.3m/s에서 비교 평가하였다. 실린더 주위의 압력분포는 0.2D의 제어봉을 부착하였을 경우, 유속의 변화에 관계없이 가장 양호한 경향을 보이는 것을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1133-1138
• /
• 1991

A control of nonlinear system is motivated by the fact that all real plants are nonlinear systems and model identification introduces parameter errors. The purpose of this study is to design a Discrete Variable Structure Controller(DVSC) for single-rod hydraulic cylinder system. The model contains uncertain parameters which we known to lie upper and lower bounds. In the design of DVSC, the boundary layer concept was adopted to reduce cattering. The DVSC was evaluated through digital computer simulation and compared with a VSC (analog controller).