• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.506-514
• /
• 2009

To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.764-768
• /
• 1993

This study was developed a computer-controlled automatic drying system. In order to control automatically the temperature, relative humidity weight of the sample, drying system with computer and connecting parts such as microcomputer, PC-Lab card, Op. Amp., and relay system were developed for controlling the heater, fan, humidifier and dehumidifier. Using this system, drying characteristic mechanism of ginseng were investigated. The increase of drying temperature decreased Hunter L value and increased a and b value. The hardness and shrinkage rate of white ginseng had a increasing tendency with the increase of drying temperature. Crude saponin content was not affected by drying temperature and relative humidity.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.266-276
• /
• 2011

In wireless networks, it is well-known that intermediate nodes can be used as cooperative relays to reduce the transmission energy required to reliably deliver a message to an intended destination. When the network is under a central authority, energy allocations and cooperative pairings can be assigned to optimize the overall energy efficiency of the network. In networks with autonomous selfish nodes, however, nodes may not be willing to expend energy to relay messages for others. This problem has been previously addressed through the development of extrinsic incentive mechanisms, e.g., virtual currency, or the insertion of altruistic nodes in the network to enforce cooperative behavior. This paper considers the problem of how selfish nodes can decide on an efficient energy allocation and endogenously form cooperative partnerships in wireless networks without extrinsic incentive mechanisms or altruistic nodes. Using tools from both cooperative and non-cooperative game theory, the three main contributions of this paper are (i) the development of Pareto-efficient cooperative energy allocations that can be agreed upon by selfish nodes, based on axiomatic bargaining techniques, (ii) the development of necessary and sufficient conditions under which "natural" cooperation is possible in systems with fading and non-fading channels without extrinsic incentive mechanisms or altruistic nodes, and (iii) the development of techniques to endogenously form cooperative partnerships without central control. Numerical results with orthogonal amplify-and-forward cooperation are also provided to quantify the energy efficiency of a wireless network with sources selfishly allocating transmission/relaying energy and endogenously forming cooperative partnerships with respect to a network with centrally optimized energy allocations and pairing assignments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.89-96
• /
• 2003

In this paper, a CCSDS(Consultative Committee for Space Data Systems) telecommand(TC) decryptor for the security of geostationary communications satellite was implemented. For the confidentiality of CCSDS TC datalink security, Option-A which implements the security services below the transfer sublayer was selected. Also CFB(Cipher Feedback) operation mode of DES(Data Encryption Standard) was used for the encryption of 56-bit data bits in 64-bit codeblock. To verify Decryptor function, the DES CFB logic implemented on A54SX32 FPGA(Field Programmable Gate Array) was integrated with interface and control logics in a PCB(Printed Circuit Board). Using a function test PC, the encrypted codeblocks were generated, transferred into the decryptor, decrypted, and the decrypted codeblocks were transmitted to the function test PC, and then compared with the source codeblocks. Through LED(Light Emitting Diode) ON operation by driving the relay related to Op-code decoded and the comparison between the codeblock output waveforms measured and those simulated, the telecommand decryptor function was verified.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.171-179
• /
• 2016

The energy consumption problem in wireless sensor networks is investigated. The problem is to expend as little energy as possible receiving and transmitting data, because of constrained battery. In this paper, in order to extend the lifetime of the network, we proposed a location-based clustering algorithm for wireless sensor network with skewed-topology. The proposed algorithm is to deploy multiple child nodes at the sink to avoid bottleneck near the sink and to save energy. Proposed algorithm can reduce control traffic overhead by creating a dynamic cluster. We have evaluated the performance of our clustering algorithm through an analysis and a simulation. We compare our algorithm's performance to the best known centralized algorithm, and demonstrate that it achieves a good performance in terms of the life time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1058-1065
• /
• 2008

In the Internet, as computer resource is developed, multimedia data request being increase more and more. It is effective way that process both high capacity-data and real-time data. Overlay Multicast is an effective method for efficient utilization of system resources and network bandwidth without using hardware customization. Overlay Multicast is an effective method for multimedia data service to multi-users. Multicast tree reconstruction is required when a non-leaf host leaves or fails. In this paper, relay-frame interval is selected as revealed network-state with jitter. In our proposal, multi-user service control algorithm gives a delay effect in multimedia request time. The simulation results show that our proposal takes shorter period of time than the other algorithms to reconstruct a similar tree and that it is a more effective way to deal with a lot of nodes that have lost their multi-user nodes.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.253-257
• /
• 2020

The local information processing devices are devices that process information by converting voltage, current, and digital electric signals from legacy-type power facility into IEC 61850 based data. It acquires and processes the operation information of legacy-type power facility, performs control of power facility, and interlock function using internal logic. In particular, the time to convert data to process input and output information for a device is important because a number of protection relay input and output signals are handled by only one device. This paper introduces test methods and cases for measuring IEC 61850 communication function and input/output data conversion time of local information processing device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2131-2139
• /
• 2014

In this paper, a binary-coded physical-layer network coding (PNC) is considered when high-order modulation techniques are used at source nodes in wireless communication environments. In the conventional PNC schemes, tight power control and phase compensation are required at a relay node. However, they may not be feasible in practical wireless communication environments. Thus, we do not assume the pre-equalization in this paper, and we only utilize the channel state information at receiver (CSIR). We propose a signal detection method for the binary-coded PNC with high-order modulation, such as QPSK and 16QAM, at the source nodes, while the conventional scheme only consider the BPSK at source nodes. We also analyze the bit-error performance of the proposed technique in both uncoded and coded cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.189-197
• /
• 2016

Mobile ad-hoc networks (MANETs) experience frequent link disconnections due to non-uniform node distribution and mobility. Thus, end-to-end path establishment-based routing protocols cause frequent transmission failures in MANETs, resulting in heavy control messages for path reestablishment. While location-based MANET routing protocols, such as Greedy Perimeter Stateless Routing (GPSR), use location information to forward messages in a hop-by-hop routing fashion without an end-to-end path establishment procedure, such protocols encounter communication void problems when message forwarding to the next hop fails due to the absence of a relay node. Therefore, to solve this problem, this paper proposes a Delay Tolerant-GPSR (DT-GPSR) protocol, which combines Delay Tolerant Networking (DTN) technology with the GPSR protocol. The performance of DT-GPSR is compared with the performances of the original GPSR and PRoPHET routing protocols through simulation using NS-2. The simulation results confirm that DT-GPSR outperforms GPSR and PRoPHET in terms of the message delivery ratio and message delivery delay.