• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.237-243
• /
• 2018

Performance-oriented design has been introduced in fire protection design, and various efforts have been made to minimize the damage caused by fire in the design stage. We conducted a study to provide information for reasonable design factors using a Fire Dynamic Simulation code provided by the NIST on boundary width and amount of supply. This paper shows that using a living-room air-supply system in a large space and dividing the space by a ventilation boundary are the two factors that are considered to have the greatest influence on the design of the living room ventilation. The results show that for performance-based design, the width of the ventilation boundary is designed to be the maximum limit in the initial design. It is judged that reasonable air volume determination should be made through various methods.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.190-200
• /
• 2019

The flyback converter, which can be regarded as a nonlinear time-varying system, has complex dynamics and nonlinear behaviors. These phenomena can affect the stability of the converter. To simplify the modeling process and retain the information of the output capacitor branch, a special sampled-data model of a peak current-mode (PCM) controlled flyback converter is established in this paper. Based on this, its dynamic behaviors are analyzed, which provides guidance for designing the circuit parameters of the converter. With the critical stability boundary equation derived by a Jacobian matrix, the stable operation range with a varied output capacitor, proportional coefficient of error the amplifier, input voltage, reference voltage and slope of the compensation ramp of a PCM controlled flyback converter are investigated in detail. Research results show that the duty ratio should be less than 0.5 for a PCM controlled flyback converter without ramp compensation to operate in a stable state. The stability regions in the parameter space between the output capacitor and the proportional coefficient of the error amplifier are enlarged by increasing the input voltage or by decreasing the reference voltage. Furthermore, the ramp compensation also can extend to the stable region. Finally, time-domain simulations and experimental results are presented to verify the theoretical analysis results.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.40-47
• /
• 2019

The purpose of this study aimed to develop the misutkaru water drink intake program that was possible to compare the effects of misutkaru drink on relieving constipation and physiological measurementson relieving constipation of the patients with hemodialysis. This study was non-equivalent control group pretest-posttest design with 42 patients in a general hospital in S city, Korea. During the experiment, the participants had to drink misutkaru water in the morning and past the 7 days after intake as constipation assessment scale, potassium and phosphorus were measured. The data were examine using t-test, Fisher's exact test, paired t-test. After misutkaru drinking intervention, constipation (z=-2.66, p=.002) decreased significantly improvement. This suggests that misutkaru water drinking intervention improved constipation in patients with hemodialysis.

• Korean Journal of Agricultural Science
• /
• v.46 no.2
• /
• pp.239-256
• /
• 2019

The quality of tomatoes drastically changes according to storage conditions, such as temperature, humidity, and air composition. High storage temperatures result in the degradation of the firmness and color of tomatoes and in decay by bacteria, whereas chilling injury and softening can be caused by storage at low temperatures. The gas composition in the storage and packaging are other parameters that influence the quality and shelf life of tomatoes by preventing excessive transpiration and respiration. In addition, tomato quality is dependent on the degree of maturity and harvest season. Because there are many quality parameters, it is necessary to systemically establish an optimal standard, and this approach requires collecting and reviewing various data on storage conditions. The aim of this review was to provide basic information by comparing and analyzing studies on the changes in tomato quality (firmness, color, lycopene content, and acidity of tomatoes) during storage and to describe a few models that can assess the quality parameters. Many studies have provided results from experiments on the effects of postharvest control (e.g., storage temperature, packaging film, and gas treatment, as reviewed above) on tomato quality including firmness, soluble solids content, and lycopene content. However, it is still necessary to conduct an overall analysis of the published conditions and to determine the best method for preserving the quality of tomatoes as well as other fruits.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.167-191
• /
• 2021

Objectives Degenerative osteoarthritis of knee is a disease with an increasing number of patients worldwide and its general treatments have some side effects. Methods 102 subjects were classified into test group 1, test group 2, and control group, and clinical trial products were taken for 12 weeks. The effectiveness was evaluated with changes in visual analogue scale, Korean-Western Ontario and McMaster Universities Osteoarthritis Index, inducible nitric oxide synthase, and cyclooxygenase-2. Results Both test group 1 and test group 2 were effective in reducing the pain of degenerative osteoarthritis of knee, and only test group 2 was effective in improving the ability to perform daily activities. No clinically significant changes were observed for any safety parameter. Conclusions In conclusion, the data of this study indicate that Zanthoxylum piperitum leaf extract has effectiveness and safety against mild degenerative osteoarthritis of knee.

• Phonetics and Speech Sciences
• /
• v.12 no.4
• /
• pp.73-80
• /
• 2020

In this study, a method for measuring the jitter component in continuous speech is presented. In the conventional jitter measurement method, pitch variabilities are commonly measured from the sustained vowels. In the case of continuous speech, such as a spoken sentence, distortion occurs with the existing measurement method owing to the influence of prosody information according to the sentence. Therefore, we propose a method to reduce the pitch fluctuations of prosody information in continuous speech. To remove this pitch fluctuation component, a curve representing the fluctuation is obtained via polynomial interpolation for the pitch track in the analysis interval, and the shift is removed according to the curve. Subsequently, the variability of the pitch frequency is obtained by a method of measuring jitter from the trajectory of the pitch from which the shift is removed. To measure the effects of the proposed method, parameter values before and after the operations are compared using samples from the Kay Pentax MEEI database. The statistical analysis of the experimental results showed that jitter components from the continuous speech can be measured effectively by proposed method and the values are comparable to the parameters of sustained vowel from the same speaker.

• Journal of Drive and Control
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2021

This paper presents research on methods for the reduction of forklifts' noise level for the increased comfort and safety of its operator. A cooling fan with a high air volume flow rate installed in the forklift acts as an important design parameter which efficiently cools the heat exchanger system, helping to transfer internal heat from the engine room to the outdoors with both transmitted and diffracted opening noises. The cooling fan contributes significantly to both the forklift's emitted sound power and the operator room's noise level, thereby necessitating research on the forklift's reduction of acoustic power level and transmission. A noise analysis for various fan models with a biomimetic design based on eagle-wing geometry was conducted. In addition to the acoustic power generation, the aerodynamic performance of the cooling blade is also strongly influenced by the design of airfoil distribution, thereby requiring optimization. The cooling fans were fabricated and installed in the forklift in order to check the efficacy of the forklift engine's cooling, and the final version of the fan was measured for its ability to lower acoustic power level and cool the engine room. This study explains the aerodynamic and acoustic features of the designed fans with the use of BEM analysis and forklift test results.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.980-993
• /
• 2020

Deep-learning based style transfer has recently attracted great attention, because it provides high quality transfer results by appropriately reflecting the high level structural characteristics of images. This paper deals with the problem of providing more stable and more diverse style transfer results of such deep-learning based style transfer method. Based on the investigation of the experimental results from the wide range of hyper-parameter settings, this paper defines the problem of the stability and the diversity of the style transfer, and proposes a partial loss normalization method to solve the problem. The style transfer using the proposed normalization method not only gives the stability on the control of the degree of style reflection, regardless of the input image characteristics, but also presents the diversity of style transfer results, unlike the existing method, at controlling the weight of the partial style loss, and provides the stability on the difference in resolution of the input image.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.93-98
• /
• 2021

The complex effects of the machining parameters make it is difficult to control and predict surface roughness. The theoretical surface roughness observed during mechanical machining with a round tool is determined by the tool radius and pitch. However, it was revealed that other parameters, such as the depth of cut and cutting speed, also affect surface roughness. This study adapted the Taguchi method, which can analyze the effects of cutting parameters quantitatively with an efficient number of experiments, to optimize the parameters for better surface roughness. Experiments were designed based on an orthogonal array, and the quantitative effects on the surface roughness were analyzed using the S/N ratio. The surface roughness was affected by all parameters, especially the tool radius. The optimum cutting parameter values obtained in this study showed better surface roughness than the other combinations of the parameters.

• Korean Journal of Materials Research
• /
• v.30 no.12
• /
• pp.650-654
• /
• 2020

A combination of Polycarbonate (PC) material and Polymethylmethacrylate (PMMA), fabricated using an injection molding machine, has been investigated to determine its advantages, as studied in Ref. 1). This paper aims to investigate the optimization of PMMA/PC blend for both tensile yield strength and impact strength. Furthermore, interaction effects of process conditions on mechanical properties including tensile yield strength and impact strength of PMMA/PC blend by injection molding process are interpreted in this study. Tensile and impact specimens are designed following ASTM, type V, and are fabricated by injection molding process. The processing conditions such as melt temperature, mold temperature, packing pressure, and cooling time are applied; each factor has three levels. As a result, in comparison with optimization of separated responses, mechanical properties of PMMA/PC are found to decrease when optimizing both tensile and impact strengths simultaneously. The melt temperature is found to be the most significant interaction parameter with the mold temperature and packing pressure. In addition, there is more interaction between the mold temperature and cooling time. This investigation provides a useful understanding of the control of injection molding processing of polymer blends in optical application.