• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.1051-1058
• /
• 2014

In this study, we investigated the improvement effect of obesity by treatment with a developed low frequency electrical stimulation system. Thirty female in their 20's as an experiment subjects divided 3 groups(control, commercialized device, developed device) were treated with electrical stimulation on abdomen for 4 weeks. The body weight, body mass index(BMI), waist-hip ratio(WHR), muscle strength, muscle(transverse abdominis(TrA), internal obliquus abdominis(IO), external obliquus abdominis(EO)), fat thickness and abdominal surface temperature were measured by electromyogram(EMG), ultrasound and digital infrared thermal image(DITI). In the result, the body weight and BMI were decreased. Subcutaneous abdominal fat were significantly reduced after 4 weeks. The muscle strength and TrA muscle thickness was increased 13.2%(p<0.05), and 35.5%, respectively. The fat thickness showed decrease in abdomen (p<0.05). Infrared measurement on abdominal surface temperature as a parameter of improvement in blood circulation was significantly increased(p<0.05). Therefore, the low frequency stimulation showed positive effects on parameters of the obesity improvement.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.437-445
• /
• 2005

Zeta potential is a key parameter of double layer repulsion for individual particles and can usually be used to interpret the trend of coagulation efficiency. This study focused on the measurement of zeta potential of algae and clay under various experimental conditions including water characteristics (pure water, stream water, reservoir water) and coagulant dose (10~50 mg/L). Results showed that the variation of zeta potential was highly sensitive depending on the water characteristics and coagulation conditions. Zeta potential of two genera of algae (anabaena sp. and microcystis sp.) were changed highly with coagulant dosage, especially. On the basis of trajectory analysis, bubble-floc collision efficiency simulated in terms of zeta potential was fitted well with removal efficiency of chlorophyll-a from algae particles. It was found that the control of zeta potential was important for effective removal of algae particles.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.8
• /
• pp.598-604
• /
• 1999

This paper describes the research to minimize the film stress and maximize the aspect ratio of photoresist structure, especially about SU-8 for electroplating mold. UV LIGA process using SU-8 allows fabricating high aspect ratio polymer structures. However, it is hard to get fine patterns in the high aspect ratio structures because of high internal stress and difficulty of removing SU-8. The purpose of this paper is to setup the process condition for the obtainment of both low film stress and high aspect ratio and to find design rules that make the pattern be less dependent on stress problem. Firstly, the process of heat treatment and exposure of SU-8 are proposed. These two conditions control the amount of cross-linkage in polymer structure, which is the most important parameter of both pattern generation and remaining stress. Heat treatment is dealed with soft bake and post-exposure-bake. Temperature and time duration of each step are varied with heat treatment condition. Some test patterns are fabricated to evaluate the proposed process. Nickel electroplating is performed with the mold fabricated through the proposed process to confirm the SU-8 as a good electroplating mold.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.1-7
• /
• 2011

The Measurement of risk parameter in city-gas equipments have been measured and confirmed by human, and evolved into remote monitoring system using wireless communication. Furthermore, domestic and international industry increase the efficiency of management, which can develop remote monitoring and control system using wireless communication. However, Those wireless system might be decrease the efficiency and ease because of connecting PDA and lap-top using wire-cable when data have checked immediately from outside. This paper is able to improve efficiency of safety management on city-gas equipments by developing mobile city-gas safety management system on AR.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.3
• /
• pp.46-50
• /
• 2012

Plasma actuator makes parallel flow on the wall surface by the interaction between plasma and neutral air particles. Dielectric barrier discharge (DBD) plasma actuator is widely studied as one type of plasma actuators, which consists of one electrode exposed to the environmental gas and the other encapsulated by a dielectric material. This paper is experimentally focused on the performance of DBD plasma actuator mounted on a flat plate, which depends on kinds of the electrode materials, their thicknesses and the supplied voltage including its frequency. We measured the velocity magnitudes of the induced flow by a stagnation probe as a performance parameter of the plasma actuators. The velocity profiles of the flow induced by the plasma actuators are similar in all measurement cases. The magnitude of the induced velocity is strongly influenced by the thickness of the electrodes and the frequency of the input voltage. The performance of DBD plasma actuators is related to the electric properties of the electrode materials such as the ionization energy and the electrical resistivity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.75-80
• /
• 2010

Noise handing is very important in voice recognition of vehicle environment. that has been studying about to hardware and software approach. hardware method that is noise filter circuit design, basically using Low-pass filter. it was shown a good result. and the side of software that has been developing about to algorithm for Noise canceler, NN(neural network), etc. in this paper we have analysis about to classified parameter pattern matting level for voice recognition on car noise environment that use of DTW(Dynamic Time Warping) which is applicable time series pattern recognition algorithm.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.408-414
• /
• 2007

Research advances in the areas of micro-sensor device and wireless network technology, has made it possible to develop energy efficient and low cost wireless sensor nodes. In this paper, the forward error control (FEC) scheme for lower power consumption and excellent BER(Bit Error Rate) performance during transmission propose in multi-hop wireless sensor network based on FSK modem. The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the sensor node. The probability of receiving a correct bit and codeword for relaying a frame over h nodes to the sink node is calculated as a function of channel parameter, number of hops, number of bits transmitted and the distance between the different nodes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.217-224
• /
• 2005

A methodology of selecting an optimal model is proposed for applying a frequency-domain SI method effectively. Instead of using a reduced finite element model, a reasonably detail finite element model is established first and then the model is identified. To satisfy the identifiability criterion, a parameter grouping scheme is applied to control the number of unknowns. Among the simulated member grouping cases, an optimal model is selected as the one with the minimal statistical error. The proposed approach has been examined through simulation studies on a single span box-girder bridge.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.778-788
• /
• 2013

The objective of this study was to investigate the effects and availability of arrowroot powder in making white bread. The characteristics of pasting, farinogram and alveogram of the dough containing arrowroot powder were analyzed. Further, the physicochemical properties of white bread were analyzed by different mixing ratios (0, 3, 5 and 7%) of arrowroot powder during storage periods. When 7% of arrowroot powder was added, the initial pasting temperature of the dough by using a RVA (rapid visco analyzer) was significantly increased. Peak viscosity, holding strength, break down, final viscosity and set back were decreased by increasing added arrowroot powder. With the increasing amounts of arrowroot powder, the values of farinogram and alveogram parameter for the dough showed a tendency to decrement. The texture profile analysis of the white bread revealed that hardness, springiness, cohesiveness and gumminess were increased by adding arrowroot powder and further, the storage time was longer. By increasing the amount of added arrowroot powder, the L value of the white bread was decreased, whereas the a, b value were increased. In the sensory evaluation, the white bread of the control and that of the added 3% arrowroot powder showed the highest preference in total score.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2660-2664
• /
• 2003

In this study, the concept of autonomous mobility is applied to a medical service robot. The aim of the development of the service robot is for the elderly assisting walking rehabilitation. This study aims that the service robot design parameter is proposed in ergonomic view. The walking assistant path pattern is derived from analyzing the elderly gait analysis. A lever is installed in the AMR in order to measure the pulling force and the leading force of the elderly. A lever mechanism is applied for walking assistant service of the AMR. This lever is designed for measuring the leading force of the elderly. The elderly adjusts the velocity of the robot by applying force to the lever. The action scope and the service mechanism of the robot are developed for considering and analyzing the elderly action patterns. The ergonomic design parameters, that is, dimensions, action scope and working space are determined based on the elderly moving scope. The gait information is acquired by measuring the guide lever force by load cells and working pattern by the electromyography signal.